Zhu, Qiang

Selected Publications

• Journal Article

  Year	Title
  2022	Formation mechanism and evolution of white etching layers on different rail grades Published In International Journal of Fatigue
  2021	A study of water-based lubricant with a mixture of polyphosphate and nano-TiO2 as additives for hot rolling process Published In Wear
  2021	Green synthesis of porous SiC ceramics using silicon kerf waste in different sintering atmospheres and pore structure optimization Published In Ceramics International
  2021	Sliding wear behavior and electrochemical properties of binder jet additively manufactured 316SS /bronze composites in marine environment Published In Tribology International
  2021	Structure and properties of Al2O3-bonded porous fibrous YSZ ceramics fabricated by aqueous gel-casting Published In Ceramics International
  2021	Synthesis and characterization of mullite-ZrO2 porous fibrous ceramic for highly efficient oil-water separation Published In Ceramics International
  2021	Synthesis of nanopowders with low agglomeration by elaborating �� values for producing Gd2O3-MgO nanocomposites with extremely fine grain sizes and high mid-infrared transparency Published In Journal of the European Ceramic Society
  2020	Achieving the excellent self-lubricity and low wear of TiAl intermetallics through the addition of copper coated graphite Published In Composites Part B: Engineering
  2020	An investigation on the deformation mechanisms of high carbon steel under the influence of thermal and rate-dependent loading Published In Materials Science and Engineering A
  2020	Experimental and numerical investigation on the impact resistance of high-carbon low-alloy steel Published In Archives of Civil and Mechanical Engineering
  2020	Recycling of coal ash for production of dense ��-Sialon/ZrN/ZrON-based ceramics without sintering aids via pressureless sintering Published In International Journal of Applied Ceramic Technology
  2020	Zr-Co-Al bulk metallic glass composites containing B2 ZrCo via rapid quenching and annealing Published In Journal of Alloys and Compounds
  2018	Erratum to: Chemical nature of alkaline polyphosphate boundary film at heated rubbing surfaces (Scientific Reports, (2016), 6, 1, (26008), 10.1038/srep26008) Published In Scientific Reports
  2016	Acoustic emission-based condition monitoring methods: review and application for low speed slew bearing Published In Mechanical Systems and Signal Processing
  2016	Erratum: Chemical nature of alkaline polyphosphate boundary film at heated rubbing surfaces (Scientific Reports (2016) 6 (26008) DOI: 10.1038/srep26008) Published In Scientific Reports
  2015	Excellent melt lubrication of alkali metal polyphosphate glass for high temperature applications Published In RSC Advances: an international journal to further the chemical sciences
  2015	In-situ formation and densification of MgAl2O4-SmAlO3 ceramics by a single-stage reaction sintering process
  2015	Preparation and properties of low-carbon Al2O3–ZrO2–SiC–C composite refractories containing LaAl11O18 ceramic phase
  2015	The influence of alkali metal polyphosphate on the tribological properties of heavily loaded steel on steel contacts at elevated temperatures Published In Advanced Materials Interfaces
  2015	Tribofilms generated from bulk polyphosphate glasses at elevated temperatures Published In Wear
  2014	Deformation behavior and wear resistance of hard TiCN and TiCN/Ti coatings on Ti6Al4V alloy Published In Advanced Materials Research
  2014	Editorial Published In International Journal of Surface Science and Engineering
  2014	Editorial Published In International Journal of Materials and Product Technology
  2014	Effects of lubrication in ferrite rolling of interstitial free steel Published In Materials Science Forum
  2014	Flow stress and pyroplastic behaviour of ultra-low carbon steel in warm temperature range Published In Advanced Materials Research
  2013	A simulation of wear behaviour of high-speed steel hot rolls by means of high temperature pin-on-disc tests Published In Wear
  2013	Application of solid lubricant during warm rolling process of interstitial free steel Published In Materials Research Innovations
  2013	Editorial Published In Steel Research International
  2013	Editorial Published In International Journal of Materials and Product Technology
  2013	Editorial Published In Materials Research Innovations
  2013	Finite element modeling of the nanoindentation of layers of porous oxide on high speed steel Published In Steel Research International
  2013	Investigation on mechanical properties of high speed steel roll material by nanoindentation Published In Materials Research Innovations
  2012	Variations in the microstructure and mechanical properties of the oxide layer on high speed steel hot rolling work rolls Published In Journal of Materials Processing Technology
  2011	An investigation into the tribological behaviour of a work roll material at high temperature Published In Wear
  2011	Influences of commercial SiC and Al2O3-SiC synthesized from clay on the slag resistance of corundum material Published In Advanced Materials Research
  2011	Three dimensional microstructure study of oxide scale formed on a high-speed steel by means of SEM, FIB and TEM Published In Corrosion Science
  2010	High Temperature Oxidation Behaviour of a High-Speed Steel Material Published In STEEL RESEARCH INTERNATIONAL
  2010	In-situ investigation of oxidation behaviour in high-speed steel roll material under dry and humid atmospheres Published In Corrosion Science
  2010	Synthesis of Al2O3-SiC Composite and its effect on the properties of low-carbon MgO-C refractories Published In Journal of Materials Science and Technology

• Conference Paper

  Year	Title
  2010	Tribological characterization of a high speed steel roll material at elevated temperature Published In Proceedings of the 10th International Conference on Steel Rolling