Skip to main content
placeholder image

Corrigendum to ���The metallurgical bonding and high temperature tensile behaviors of 9Cr-1W steel and 316L steel dissimilar joint by friction stir welding��� [J. Manuf. Process. 44 (2019) 241���251] (Journal of Manufacturing Processes (2019) 44 (241���251), (S1526612519301422), (10.1016/j.jmapro.2019.05.033))

Journal Article


Abstract


  • The authors regret that the dimensions of the tensile samples were misused when drawing the stress-strain curves as shown in Fig. 11(a) and Fig. 13 in the original paper. This leads to the miscalculated values of the curves in Fig. 11(a) and Fig. 13. The original data of the tensile experiments have been checked, and the correct figures are provided in this corrigendum as below. The authors ensure that the mentioned corrections do not have any impact on the findings, concepts, or understanding of the paper. The authors would like to apologise for any inconvenience caused. [Figure presented] Fig. 11. Tensile curves and fracture samples of the joints in 550��� tensile tests: (a) engineering stress-strain curves. [Figure presented] Fig. 13. (a) the true stress-strain curves and (b) curves of strain hardening rate (d��/d��) vs. true strain for SZ-316 L fracture and BM-316 L fracture samples.

Publication Date


  • 2021

Citation


  • He, B., Cui, L., Wang, D., Liu, Y., Liu, C., & Li, H. (2021). Corrigendum to ���The metallurgical bonding and high temperature tensile behaviors of 9Cr-1W steel and 316L steel dissimilar joint by friction stir welding��� [J. Manuf. Process. 44 (2019) 241���251] (Journal of Manufacturing Processes (2019) 44 (241���251), (S1526612519301422), (10.1016/j.jmapro.2019.05.033)). Journal of Manufacturing Processes, 65, 354. doi:10.1016/j.jmapro.2021.03.025

Scopus Eid


  • 2-s2.0-85103752422

Start Page


  • 354

Volume


  • 65

Issue


Place Of Publication


Abstract


  • The authors regret that the dimensions of the tensile samples were misused when drawing the stress-strain curves as shown in Fig. 11(a) and Fig. 13 in the original paper. This leads to the miscalculated values of the curves in Fig. 11(a) and Fig. 13. The original data of the tensile experiments have been checked, and the correct figures are provided in this corrigendum as below. The authors ensure that the mentioned corrections do not have any impact on the findings, concepts, or understanding of the paper. The authors would like to apologise for any inconvenience caused. [Figure presented] Fig. 11. Tensile curves and fracture samples of the joints in 550��� tensile tests: (a) engineering stress-strain curves. [Figure presented] Fig. 13. (a) the true stress-strain curves and (b) curves of strain hardening rate (d��/d��) vs. true strain for SZ-316 L fracture and BM-316 L fracture samples.

Publication Date


  • 2021

Citation


  • He, B., Cui, L., Wang, D., Liu, Y., Liu, C., & Li, H. (2021). Corrigendum to ���The metallurgical bonding and high temperature tensile behaviors of 9Cr-1W steel and 316L steel dissimilar joint by friction stir welding��� [J. Manuf. Process. 44 (2019) 241���251] (Journal of Manufacturing Processes (2019) 44 (241���251), (S1526612519301422), (10.1016/j.jmapro.2019.05.033)). Journal of Manufacturing Processes, 65, 354. doi:10.1016/j.jmapro.2021.03.025

Scopus Eid


  • 2-s2.0-85103752422

Start Page


  • 354

Volume


  • 65

Issue


Place Of Publication