Skip to main content
placeholder image

The effects of multiple repair welds on a quenched and tempered steel for naval vessels

Journal Article


Abstract


  • Significant cost and time savings may be realised if multiple weld repairs are undertaken at the same location during the long-term maintenance of naval vessels. Consequently, this investigation simulates full-thickness hull welds, which are required to facilitate the removal and subsequent replacement of hull sections, by assessing the effects of 4 reoccurring weld repairs on a propriety quenched and tempered steel used for naval applications. Optical metallography, electron backscattering diffraction (EBSD), hardness maps, Charpy impact, and dynamic tear tests were conducted. A combination of real weld repairs and Gleeble heat-affected zone (HAZ) simulations were undertaken to characterise the effects of repeated thermal cycles on the microstructure and toughness of different sub-HAZ regions. When the intercritical reheat temperature was just above the AC1 lower critical transformation temperature, the impact toughness was substantially reduced. This includes the fine-grained HAZ where high toughness is typically expected. The low toughness was attributed to the promotion of fracture initiation via debonding between the matrix and second phase which formed at prior austenite grain boundaries. Compared to the original toughness, the application of multiple repeat welds or multiple simulations of the same sub-HAZ thermal cycle did not deteriorate toughness nor noticeably alter the final microstructure.

Publication Date


  • 2021

Citation


  • Carpenter, K. R., Dissanayaka, P., Sterjovski, Z., Li, H., Donato, J., Gazder, A. A., . . . Johansson, M. (2021). The effects of multiple repair welds on a quenched and tempered steel for naval vessels. Welding in the World, 65(10), 1997-2012. doi:10.1007/s40194-021-01150-y

Scopus Eid


  • 2-s2.0-85108378274

Web Of Science Accession Number


Start Page


  • 1997

End Page


  • 2012

Volume


  • 65

Issue


  • 10

Abstract


  • Significant cost and time savings may be realised if multiple weld repairs are undertaken at the same location during the long-term maintenance of naval vessels. Consequently, this investigation simulates full-thickness hull welds, which are required to facilitate the removal and subsequent replacement of hull sections, by assessing the effects of 4 reoccurring weld repairs on a propriety quenched and tempered steel used for naval applications. Optical metallography, electron backscattering diffraction (EBSD), hardness maps, Charpy impact, and dynamic tear tests were conducted. A combination of real weld repairs and Gleeble heat-affected zone (HAZ) simulations were undertaken to characterise the effects of repeated thermal cycles on the microstructure and toughness of different sub-HAZ regions. When the intercritical reheat temperature was just above the AC1 lower critical transformation temperature, the impact toughness was substantially reduced. This includes the fine-grained HAZ where high toughness is typically expected. The low toughness was attributed to the promotion of fracture initiation via debonding between the matrix and second phase which formed at prior austenite grain boundaries. Compared to the original toughness, the application of multiple repeat welds or multiple simulations of the same sub-HAZ thermal cycle did not deteriorate toughness nor noticeably alter the final microstructure.

Publication Date


  • 2021

Citation


  • Carpenter, K. R., Dissanayaka, P., Sterjovski, Z., Li, H., Donato, J., Gazder, A. A., . . . Johansson, M. (2021). The effects of multiple repair welds on a quenched and tempered steel for naval vessels. Welding in the World, 65(10), 1997-2012. doi:10.1007/s40194-021-01150-y

Scopus Eid


  • 2-s2.0-85108378274

Web Of Science Accession Number


Start Page


  • 1997

End Page


  • 2012

Volume


  • 65

Issue


  • 10