Skip to main content
placeholder image

Influence of thermo hydrogen treatment on hot deformation behavior of Ti600 alloy

Journal Article


Abstract


  • Hot compressive deformation of Ti600 alloy after thermo hydrogen treatment (THT) was carried out within hydrogen content range of 0-0.5%, temperature range of 760-920 °C and strain rate range of 0.01-10 s-1. The flow stress of Ti600 alloy after THT was obtained under hot deformation condition, and the influence of hydrogen on work-hardening rate (S*), strain energy density (U*), and deformation activation energy (Q) was analysed. The results show that the flow stress of Ti600 alloy decreases remarkably with the increase of hydrogen when the hydrogen content is less than 0.3%. Both S* and U* decrease with the increase of hydrogen when the hydrogen content is less than 0.3%, and when the hydrogen content is more than 0.3%, S* and U* increase with hydrogen addition. The value of Q decreases with the increase of strain at the same hydrogen content. The addition of small quantity of hydrogen leads to an increase of Q at small strain values, and when the strain reaches 0.6, the value of Q decreases gradually with the increase of hydrogen. When the hydrogen content is within the range of 0.1%-0.3%, the flow stress of Ti600 alloy is decreased when being deformed at the temperature range of 760-920 °C. © 2009 The Nonferrous Metals Society of China.

Publication Date


  • 2009

Citation


  • ZHAO, J. W., DING, H., WANG, Y. Q., & HOU, H. L. (2009). Influence of thermo hydrogen treatment on hot deformation behavior of Ti600 alloy. Transactions of Nonferrous Metals Society of China (English Edition), 19(1), 65-71. doi:10.1016/S1003-6326(08)60230-7

Scopus Eid


  • 2-s2.0-58649123907

Start Page


  • 65

End Page


  • 71

Volume


  • 19

Issue


  • 1

Abstract


  • Hot compressive deformation of Ti600 alloy after thermo hydrogen treatment (THT) was carried out within hydrogen content range of 0-0.5%, temperature range of 760-920 °C and strain rate range of 0.01-10 s-1. The flow stress of Ti600 alloy after THT was obtained under hot deformation condition, and the influence of hydrogen on work-hardening rate (S*), strain energy density (U*), and deformation activation energy (Q) was analysed. The results show that the flow stress of Ti600 alloy decreases remarkably with the increase of hydrogen when the hydrogen content is less than 0.3%. Both S* and U* decrease with the increase of hydrogen when the hydrogen content is less than 0.3%, and when the hydrogen content is more than 0.3%, S* and U* increase with hydrogen addition. The value of Q decreases with the increase of strain at the same hydrogen content. The addition of small quantity of hydrogen leads to an increase of Q at small strain values, and when the strain reaches 0.6, the value of Q decreases gradually with the increase of hydrogen. When the hydrogen content is within the range of 0.1%-0.3%, the flow stress of Ti600 alloy is decreased when being deformed at the temperature range of 760-920 °C. © 2009 The Nonferrous Metals Society of China.

Publication Date


  • 2009

Citation


  • ZHAO, J. W., DING, H., WANG, Y. Q., & HOU, H. L. (2009). Influence of thermo hydrogen treatment on hot deformation behavior of Ti600 alloy. Transactions of Nonferrous Metals Society of China (English Edition), 19(1), 65-71. doi:10.1016/S1003-6326(08)60230-7

Scopus Eid


  • 2-s2.0-58649123907

Start Page


  • 65

End Page


  • 71

Volume


  • 19

Issue


  • 1