Skip to main content
placeholder image

In and ex situ investigations of the ß-phase in a Nb and Mo containing ¿-TiAl based alloy

Journal Article


Abstract


  • In a β-stabilized Ti-43Al-4Nb-1Mo-0.1B alloy (composition in atomic percent) the correlation between the occurrence of β-phase and temperature was analyzed experimentally and compared to thermodynamic calculations. Results from in situ high-energy X-ray diffraction, texture measurements, heat treatments, scanning electron microscopy, and temperature-dependent flow stress measurements were used to study the evolution of the β-phase with temperature. Thermodynamic calculations based on the CALPHAD method were applied to correlate the phases developed in the β-solidifying TiAl based alloy under investigation. This alloy is characterized by an adjustable β-phase volume fraction at temperatures where hot-work processes such as forging and rolling are conducted. Due to a high volume fraction of β-phase at elevated temperatures the hot-extruded alloy can be forged under near conventional conditions. © 2008 Elsevier Ltd. All rights reserved.

Publication Date


  • 2008

Citation


  • Clemens, H., Chladil, H. F., Wallgram, W., Zickler, G. A., Gerling, R., Liss, K. D., . . . Smarsly, W. (2008). In and ex situ investigations of the ß-phase in a Nb and Mo containing ¿-TiAl based alloy. Intermetallics, 16(6), 827-833. doi:10.1016/j.intermet.2008.03.008

Scopus Eid


  • 2-s2.0-44349145968

Start Page


  • 827

End Page


  • 833

Volume


  • 16

Issue


  • 6

Abstract


  • In a β-stabilized Ti-43Al-4Nb-1Mo-0.1B alloy (composition in atomic percent) the correlation between the occurrence of β-phase and temperature was analyzed experimentally and compared to thermodynamic calculations. Results from in situ high-energy X-ray diffraction, texture measurements, heat treatments, scanning electron microscopy, and temperature-dependent flow stress measurements were used to study the evolution of the β-phase with temperature. Thermodynamic calculations based on the CALPHAD method were applied to correlate the phases developed in the β-solidifying TiAl based alloy under investigation. This alloy is characterized by an adjustable β-phase volume fraction at temperatures where hot-work processes such as forging and rolling are conducted. Due to a high volume fraction of β-phase at elevated temperatures the hot-extruded alloy can be forged under near conventional conditions. © 2008 Elsevier Ltd. All rights reserved.

Publication Date


  • 2008

Citation


  • Clemens, H., Chladil, H. F., Wallgram, W., Zickler, G. A., Gerling, R., Liss, K. D., . . . Smarsly, W. (2008). In and ex situ investigations of the ß-phase in a Nb and Mo containing ¿-TiAl based alloy. Intermetallics, 16(6), 827-833. doi:10.1016/j.intermet.2008.03.008

Scopus Eid


  • 2-s2.0-44349145968

Start Page


  • 827

End Page


  • 833

Volume


  • 16

Issue


  • 6