Skip to main content
placeholder image

A 3D slab method in cold strip rolling

Conference Paper


Abstract


  • In this paper, a 3D slab method model has been developed. Two differential equations governing the longitudinal and transverse force equilibriums coupled with the Von Mises yield criterion have been solved to obtain the rolling pressure distribution. The strip speed is calculated according to the volume constancy. The Coulomb friction law with different frictional coefficient and speeds were applied to the longitudinal and transverse direction. Coupled with the roll stack deformation model and thermal model, the developed 3D slab method model was used to predict the strip profile and edge drop. The effects of bending force, reduction and transverse friction on the strip profile and edge drop have been discussed in this paper. The calculated result predicted by the 3D slab method is in very good agreement with measured results. The results have shown that the large bending force, small reduction and small friction will improve the strip profile and reduce the edge drop.

Publication Date


  • 2006

Citation


  • Ren, H., Tieu, A. K., Lu, C., & D'Alessio, G. (2006). A 3D slab method in cold strip rolling. In Materials Science Forum Vol. 505-507 (pp. 1279-1284). doi:10.4028/0-87849-990-3.1279

Scopus Eid


  • 2-s2.0-35348849063

Web Of Science Accession Number


Start Page


  • 1279

End Page


  • 1284

Volume


  • 505-507

Issue


  • PART 2

Abstract


  • In this paper, a 3D slab method model has been developed. Two differential equations governing the longitudinal and transverse force equilibriums coupled with the Von Mises yield criterion have been solved to obtain the rolling pressure distribution. The strip speed is calculated according to the volume constancy. The Coulomb friction law with different frictional coefficient and speeds were applied to the longitudinal and transverse direction. Coupled with the roll stack deformation model and thermal model, the developed 3D slab method model was used to predict the strip profile and edge drop. The effects of bending force, reduction and transverse friction on the strip profile and edge drop have been discussed in this paper. The calculated result predicted by the 3D slab method is in very good agreement with measured results. The results have shown that the large bending force, small reduction and small friction will improve the strip profile and reduce the edge drop.

Publication Date


  • 2006

Citation


  • Ren, H., Tieu, A. K., Lu, C., & D'Alessio, G. (2006). A 3D slab method in cold strip rolling. In Materials Science Forum Vol. 505-507 (pp. 1279-1284). doi:10.4028/0-87849-990-3.1279

Scopus Eid


  • 2-s2.0-35348849063

Web Of Science Accession Number


Start Page


  • 1279

End Page


  • 1284

Volume


  • 505-507

Issue


  • PART 2