Skip to main content
placeholder image

New LaCu0.5Mn0.5O3 thin films deposited by the sol-gel process on different substrates

Journal Article


Abstract


  • LaCu0.5Mn0.5O3 thin films (100-200 nm) have been deposited on ceramic Al2O3 and ZrO2, glass ceramic and 〈101〉 single-crystal quartz, using the sol-gel process. It was found in all cases that the films are polycrystalline and single phase without preferred orientation. The morphology of the films depends strongly on the nature of the substrate. The films deposited on Al2O3 exhibit morphological characteristics making them suitable as possible sensors and catalysts.

Publication Date


  • 1996

Citation


  • Kovacheva, D., Stambolova, I., Konstantinov, K., & Donchev, T. (1996). New LaCu0.5Mn0.5O3 thin films deposited by the sol-gel process on different substrates. Thin Solid Films, 280(1-2), 112-114. doi:10.1016/0040-6090(95)08228-X

Scopus Eid


  • 2-s2.0-0030196780

Start Page


  • 112

End Page


  • 114

Volume


  • 280

Issue


  • 1-2

Abstract


  • LaCu0.5Mn0.5O3 thin films (100-200 nm) have been deposited on ceramic Al2O3 and ZrO2, glass ceramic and 〈101〉 single-crystal quartz, using the sol-gel process. It was found in all cases that the films are polycrystalline and single phase without preferred orientation. The morphology of the films depends strongly on the nature of the substrate. The films deposited on Al2O3 exhibit morphological characteristics making them suitable as possible sensors and catalysts.

Publication Date


  • 1996

Citation


  • Kovacheva, D., Stambolova, I., Konstantinov, K., & Donchev, T. (1996). New LaCu0.5Mn0.5O3 thin films deposited by the sol-gel process on different substrates. Thin Solid Films, 280(1-2), 112-114. doi:10.1016/0040-6090(95)08228-X

Scopus Eid


  • 2-s2.0-0030196780

Start Page


  • 112

End Page


  • 114

Volume


  • 280

Issue


  • 1-2