Skip to main content
placeholder image

Corrigendum to “Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing”. [Mater. Sci. Eng. A 749 (2019) 218–222](S0921509319301911)(10.1016/j.msea.2019.02.029)

Journal Article


Abstract


  • The Authors regret an error in their published article and this should be corrected as follows: In the part 2 Experimental, “Pure titanium wire (Ф = 1.0 mm) and 1080 pure aluminum wire (Ф = 0.9 mm) are fed into a single welding pool to achieve a composition of 53.5 at% Ni Ti." should be corrected as “Pure titanium wire (Ф = 1.0 mm) and pure nickel wire (Ф = 0.9 mm) are fed into a single welding pool to achieve a composition of 53.5 at% Ni Ti." The Authors apologise for any inconvenience caused.

UOW Authors


  •   Yang, Guangsai (external author)
  •   Wang, Jun (external author)
  •   Yang, Guangsai (external author)
  •   Han, Jian (external author)
  •   Li, Hui Jun.
  •   Pan, Zengxi

Publication Date


  • 2019

Citation


  • Wang, J., Pan, Z., Yang, G., Han, J., Chen, X., & Li, H. (2019). Corrigendum to “Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing”. [Mater. Sci. Eng. A 749 (2019) 218–222](S0921509319301911)(10.1016/j.msea.2019.02.029). Materials Science and Engineering A, 756, 129. doi:10.1016/j.msea.2019.04.041

Scopus Eid


  • 2-s2.0-85064261525

Start Page


  • 129

Volume


  • 756

Abstract


  • The Authors regret an error in their published article and this should be corrected as follows: In the part 2 Experimental, “Pure titanium wire (Ф = 1.0 mm) and 1080 pure aluminum wire (Ф = 0.9 mm) are fed into a single welding pool to achieve a composition of 53.5 at% Ni Ti." should be corrected as “Pure titanium wire (Ф = 1.0 mm) and pure nickel wire (Ф = 0.9 mm) are fed into a single welding pool to achieve a composition of 53.5 at% Ni Ti." The Authors apologise for any inconvenience caused.

UOW Authors


  •   Yang, Guangsai (external author)
  •   Wang, Jun (external author)
  •   Yang, Guangsai (external author)
  •   Han, Jian (external author)
  •   Li, Hui Jun.
  •   Pan, Zengxi

Publication Date


  • 2019

Citation


  • Wang, J., Pan, Z., Yang, G., Han, J., Chen, X., & Li, H. (2019). Corrigendum to “Location dependence of microstructure, phase transformation temperature and mechanical properties on Ni-rich NiTi alloy fabricated by wire arc additive manufacturing”. [Mater. Sci. Eng. A 749 (2019) 218–222](S0921509319301911)(10.1016/j.msea.2019.02.029). Materials Science and Engineering A, 756, 129. doi:10.1016/j.msea.2019.04.041

Scopus Eid


  • 2-s2.0-85064261525

Start Page


  • 129

Volume


  • 756