Skip to main content
placeholder image

Analysis of fishscaling resistance of low carbon heavy plate steels

Journal Article


Download full-text (Open Access)

Abstract


  • The precipitates and hydrogen permeation behavior in three kinds of hot rolled low carbon heavy plate steels for enameling were analyzed; then, both sides of the steels were enameled. The experimental results show that a large amount of coarse Ti4C2S2 and fine Ti(C, N) particles exist in the optimized Ti-bearing steel, quite a lot of fine Ti(C, N) particles exist in the optimized carbon steel, but only a little bit fine Ti(C, N) particles exist in the carbon steel. The fishscaling resistance of the steels can be correlated to the effective hydrogen diffusion coefficient, and a model of correlation between the effective hydrogen diffusion coefficient and the volume fraction of the precipitates was established and verified. The effective hydrogen diffusion coefficient should be lower than 3. 96 × 10 6 cm2/s to avoid fishscaling in heavy plate steels.

UOW Authors


  •   Zhang, Aiwen (external author)
  •   Jiang, Zhengyi
  •   Wei, Dongbin
  •   Jiao, Sihai (external author)
  •   Xu, Chun (external author)

Publication Date


  • 2014

Citation


  • Zhang, A., Jiang, Z., Wei, D., Jiao, S. & Xu, C. (2014). Analysis of fishscaling resistance of low carbon heavy plate steels. Journal of Iron and Steel Research International, 21 (4), 469-475.

Scopus Eid


  • 2-s2.0-84897495035

Ro Full-text Url


  • http://ro.uow.edu.au/cgi/viewcontent.cgi?article=3831&context=eispapers

Ro Metadata Url


  • http://ro.uow.edu.au/eispapers/2822

Number Of Pages


  • 6

Start Page


  • 469

End Page


  • 475

Volume


  • 21

Issue


  • 4

Abstract


  • The precipitates and hydrogen permeation behavior in three kinds of hot rolled low carbon heavy plate steels for enameling were analyzed; then, both sides of the steels were enameled. The experimental results show that a large amount of coarse Ti4C2S2 and fine Ti(C, N) particles exist in the optimized Ti-bearing steel, quite a lot of fine Ti(C, N) particles exist in the optimized carbon steel, but only a little bit fine Ti(C, N) particles exist in the carbon steel. The fishscaling resistance of the steels can be correlated to the effective hydrogen diffusion coefficient, and a model of correlation between the effective hydrogen diffusion coefficient and the volume fraction of the precipitates was established and verified. The effective hydrogen diffusion coefficient should be lower than 3. 96 × 10 6 cm2/s to avoid fishscaling in heavy plate steels.

UOW Authors


  •   Zhang, Aiwen (external author)
  •   Jiang, Zhengyi
  •   Wei, Dongbin
  •   Jiao, Sihai (external author)
  •   Xu, Chun (external author)

Publication Date


  • 2014

Citation


  • Zhang, A., Jiang, Z., Wei, D., Jiao, S. & Xu, C. (2014). Analysis of fishscaling resistance of low carbon heavy plate steels. Journal of Iron and Steel Research International, 21 (4), 469-475.

Scopus Eid


  • 2-s2.0-84897495035

Ro Full-text Url


  • http://ro.uow.edu.au/cgi/viewcontent.cgi?article=3831&context=eispapers

Ro Metadata Url


  • http://ro.uow.edu.au/eispapers/2822

Number Of Pages


  • 6

Start Page


  • 469

End Page


  • 475

Volume


  • 21

Issue


  • 4