Skip to main content

On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel

Journal Article


Abstract


  • A combination of X-ray diffraction and visco-plastic self-consistent (VPSC) modelling was used to track the texture evolution in an Fe-28Mn-0.28C twinning-induced plasticity steel subjected to cold-rolling between 12% and 80% thickness reduction. Texture measurements returned the characteristic α-fibre for low stacking fault energy face-centred-cubic materials along with a weaker γ-fibre. VPSC modelling has been used to simulate real-world rolling conditions by simultaneously approximating the composite deformation pattern in heavily twinned and untwinned (or sparsely twinned) grains and empirically accounting for the usually overlooked, redundant shear effect. When the above two factors are combined with a grain-matrix interaction scheme that approaches a Sachs-type model, the evolution of the Goss and Brass orientations on the α-fibre is well captured and for the first time, the F orientation along the γ-fibre is successfully predicted.

Publication Date


  • 2014

Citation


  • Saleh, A. A., Haase, C., Pereloma, E. V., Molodov, D. A. & Gazder, A. A. (2014). On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel. Acta Materialia, 70 259-271.

Scopus Eid


  • 2-s2.0-84897384574

Ro Metadata Url


  • http://ro.uow.edu.au/eispapers/3166

Number Of Pages


  • 12

Start Page


  • 259

End Page


  • 271

Volume


  • 70

Abstract


  • A combination of X-ray diffraction and visco-plastic self-consistent (VPSC) modelling was used to track the texture evolution in an Fe-28Mn-0.28C twinning-induced plasticity steel subjected to cold-rolling between 12% and 80% thickness reduction. Texture measurements returned the characteristic α-fibre for low stacking fault energy face-centred-cubic materials along with a weaker γ-fibre. VPSC modelling has been used to simulate real-world rolling conditions by simultaneously approximating the composite deformation pattern in heavily twinned and untwinned (or sparsely twinned) grains and empirically accounting for the usually overlooked, redundant shear effect. When the above two factors are combined with a grain-matrix interaction scheme that approaches a Sachs-type model, the evolution of the Goss and Brass orientations on the α-fibre is well captured and for the first time, the F orientation along the γ-fibre is successfully predicted.

Publication Date


  • 2014

Citation


  • Saleh, A. A., Haase, C., Pereloma, E. V., Molodov, D. A. & Gazder, A. A. (2014). On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel. Acta Materialia, 70 259-271.

Scopus Eid


  • 2-s2.0-84897384574

Ro Metadata Url


  • http://ro.uow.edu.au/eispapers/3166

Number Of Pages


  • 12

Start Page


  • 259

End Page


  • 271

Volume


  • 70