Skip to main content

Optimization of the sequential polymerization synthesis method for polypyrrole films

Journal Article


Download full-text (Open Access)

Abstract


  • Polypyrrole (PPy) is widely used as an electroactive material and is most often synthesized using electrochemical polymerization. Recently, a new electropolymerization method [1] was introduced that involved preparing the PPy as a sequential series of electrodeposited layers with solvent washing in between each deposited layer. This method enabled high quality PPy free-standing films to be prepared in a relatively short time. The purpose of the present study was to investigate the effect of the polymerization current density on the mechanical and electrical properties of the sequentially polymerized (SEP) PPy films. It was found that a low current density (0.1 mA/cm2) and low temperature (-31 C) produced polypyrrole films of significantly higher conductivity and excellent mechanical properties when compared with films made at higher current densities either using the SEP method or by conventional, continuous electrodeposition.

UOW Authors


  •   Sangian, Danial (external author)
  •   Zheng, Wen (external author)
  •   Spinks, Geoff M.

Publication Date


  • 2014

Citation


  • Sangian, D., Zheng, W. & Spinks, G. M. (2014). Optimization of the sequential polymerization synthesis method for polypyrrole films. Synthetic Metals, 189 53-56.

Scopus Eid


  • 2-s2.0-84892912543

Ro Full-text Url


  • https://ro.uow.edu.au/context/aiimpapers/article/1997/type/native/viewcontent

Ro Metadata Url


  • http://ro.uow.edu.au/aiimpapers/996

Has Global Citation Frequency


Number Of Pages


  • 3

Start Page


  • 53

End Page


  • 56

Volume


  • 189

Place Of Publication


  • Switzerland

Abstract


  • Polypyrrole (PPy) is widely used as an electroactive material and is most often synthesized using electrochemical polymerization. Recently, a new electropolymerization method [1] was introduced that involved preparing the PPy as a sequential series of electrodeposited layers with solvent washing in between each deposited layer. This method enabled high quality PPy free-standing films to be prepared in a relatively short time. The purpose of the present study was to investigate the effect of the polymerization current density on the mechanical and electrical properties of the sequentially polymerized (SEP) PPy films. It was found that a low current density (0.1 mA/cm2) and low temperature (-31 C) produced polypyrrole films of significantly higher conductivity and excellent mechanical properties when compared with films made at higher current densities either using the SEP method or by conventional, continuous electrodeposition.

UOW Authors


  •   Sangian, Danial (external author)
  •   Zheng, Wen (external author)
  •   Spinks, Geoff M.

Publication Date


  • 2014

Citation


  • Sangian, D., Zheng, W. & Spinks, G. M. (2014). Optimization of the sequential polymerization synthesis method for polypyrrole films. Synthetic Metals, 189 53-56.

Scopus Eid


  • 2-s2.0-84892912543

Ro Full-text Url


  • https://ro.uow.edu.au/context/aiimpapers/article/1997/type/native/viewcontent

Ro Metadata Url


  • http://ro.uow.edu.au/aiimpapers/996

Has Global Citation Frequency


Number Of Pages


  • 3

Start Page


  • 53

End Page


  • 56

Volume


  • 189

Place Of Publication


  • Switzerland