Skip to main content
placeholder image

Effect of Ti and N concentrations on microstructure and mechanical properties of microalloyed high strength line pipe steel welds

Conference Paper


Download full-text (Open Access)

Abstract


  • A selection of nine heats of line pipe steel from the same project with different Ti and N content were used to evaluate the effects of Ti/N ratio on weld zone microstructure, hardness and prior austenite grain size (PAGS) in the coarse grained heat-affected zone (CGHAZ). It was shown that the microstructure of the base metal (BM) mainly consisted of fine grained polygonal ferrite with fine islands of pearlite. The weld metal (WM) microstructure was predominantly acicular ferrite with a small volume fraction of pro-eutectoid ferrite. The CGHAZ consisted of bainitic ferrite and islands of martensite-austenite. The inside region of the pipe weld zone and base pipe was slightly harder due to the aging effects of the outer weld pass. The prior austenite grain size was shown to be consistent over the range of seam welding conditions and the range of Ti/N from 2 to 4.2.

UOW Authors


  •   Fletcher, Leigh L. (external author)
  •   Zhu, Zhixiong (external author)
  •   Murugananth, M (external author)
  •   Zheng, Lei (external author)
  •   Bai, Mingzhuo (external author)
  •   Li, Hui Jun.
  •   Barbaro, Frank (external author)

Publication Date


  • 2011

Citation


  • Fletcher, L., Zhu, Z., Murugananth, M., Zheng, L., Bai, M., Li, H. & Barbaro, F. J. (2011). Effect of Ti and N concentrations on microstructure and mechanical properties of microalloyed high strength line pipe steel welds. Welding of high strength pipeline Steels, International Seminar (pp. 1-13).

Ro Full-text Url


  • http://ro.uow.edu.au/cgi/viewcontent.cgi?article=7491&context=engpapers

Ro Metadata Url


  • http://ro.uow.edu.au/engpapers/4560

Start Page


  • 1

End Page


  • 13

Abstract


  • A selection of nine heats of line pipe steel from the same project with different Ti and N content were used to evaluate the effects of Ti/N ratio on weld zone microstructure, hardness and prior austenite grain size (PAGS) in the coarse grained heat-affected zone (CGHAZ). It was shown that the microstructure of the base metal (BM) mainly consisted of fine grained polygonal ferrite with fine islands of pearlite. The weld metal (WM) microstructure was predominantly acicular ferrite with a small volume fraction of pro-eutectoid ferrite. The CGHAZ consisted of bainitic ferrite and islands of martensite-austenite. The inside region of the pipe weld zone and base pipe was slightly harder due to the aging effects of the outer weld pass. The prior austenite grain size was shown to be consistent over the range of seam welding conditions and the range of Ti/N from 2 to 4.2.

UOW Authors


  •   Fletcher, Leigh L. (external author)
  •   Zhu, Zhixiong (external author)
  •   Murugananth, M (external author)
  •   Zheng, Lei (external author)
  •   Bai, Mingzhuo (external author)
  •   Li, Hui Jun.
  •   Barbaro, Frank (external author)

Publication Date


  • 2011

Citation


  • Fletcher, L., Zhu, Z., Murugananth, M., Zheng, L., Bai, M., Li, H. & Barbaro, F. J. (2011). Effect of Ti and N concentrations on microstructure and mechanical properties of microalloyed high strength line pipe steel welds. Welding of high strength pipeline Steels, International Seminar (pp. 1-13).

Ro Full-text Url


  • http://ro.uow.edu.au/cgi/viewcontent.cgi?article=7491&context=engpapers

Ro Metadata Url


  • http://ro.uow.edu.au/engpapers/4560

Start Page


  • 1

End Page


  • 13