Skip to main content
placeholder image

Corrosion Behavior of Metal Active Gas Welded Joints of a High-Strength Steel for Automotive Application

Journal Article


Abstract


  • © 2017, ASM International. In this work, the corrosion behavior of metal active gas-welded joints of a high-strength steel with tensile yield strength of 900 MPa was investigated. The welded joints were obtained using two different heat inputs. The corrosion behavior has been studied in a 3.5 wt.% NaCl aqueous solution using electrochemical impedance spectroscopy and potentiodynamic polarization tests. Optical microscopy images, scanning electron microscopy and transmission electron microscopy with energy-dispersive x-ray revealed different microstructural features in the heat-affected zone (HAZ) and the weld metal (WM). Before and after the corrosion process, the sample was evaluated by confocal laser scanning microscopy to measure the depth difference between HAZ and WM. The results showed that the heat input did not play an important role on corrosion behavior of HSLA steel. The anodic and cathodic areas of the welded joints could be associated with depth differences. The HAZ was found to be the anodic area, while the WM was cathodic with respect to the HAZ. The corrosion behavior was related to the amount and orientation nature of carbides in the HAZ. The microstructure of the HAZ consisted of martensite and bainite, whereas acicular ferrite was observed in the weld metal.

UOW Authors


  •   Portella Garcia, Maina
  •   Mantovani, Gerson (external author)
  •   Vasant, R (external author)
  •   Antunes, Renato (external author)

Publication Date


  • 2017

Citation


  • Portella Garcia, M., Mantovani, G., Vasant, R. & Antunes, R. (2017). Corrosion Behavior of Metal Active Gas Welded Joints of a High-Strength Steel for Automotive Application. Journal of Materials Engineering and Performance, 26 (10), 4718-4731.

Scopus Eid


  • 2-s2.0-85028887009

Number Of Pages


  • 13

Start Page


  • 4718

End Page


  • 4731

Volume


  • 26

Issue


  • 10

Place Of Publication


  • United States

Abstract


  • © 2017, ASM International. In this work, the corrosion behavior of metal active gas-welded joints of a high-strength steel with tensile yield strength of 900 MPa was investigated. The welded joints were obtained using two different heat inputs. The corrosion behavior has been studied in a 3.5 wt.% NaCl aqueous solution using electrochemical impedance spectroscopy and potentiodynamic polarization tests. Optical microscopy images, scanning electron microscopy and transmission electron microscopy with energy-dispersive x-ray revealed different microstructural features in the heat-affected zone (HAZ) and the weld metal (WM). Before and after the corrosion process, the sample was evaluated by confocal laser scanning microscopy to measure the depth difference between HAZ and WM. The results showed that the heat input did not play an important role on corrosion behavior of HSLA steel. The anodic and cathodic areas of the welded joints could be associated with depth differences. The HAZ was found to be the anodic area, while the WM was cathodic with respect to the HAZ. The corrosion behavior was related to the amount and orientation nature of carbides in the HAZ. The microstructure of the HAZ consisted of martensite and bainite, whereas acicular ferrite was observed in the weld metal.

UOW Authors


  •   Portella Garcia, Maina
  •   Mantovani, Gerson (external author)
  •   Vasant, R (external author)
  •   Antunes, Renato (external author)

Publication Date


  • 2017

Citation


  • Portella Garcia, M., Mantovani, G., Vasant, R. & Antunes, R. (2017). Corrosion Behavior of Metal Active Gas Welded Joints of a High-Strength Steel for Automotive Application. Journal of Materials Engineering and Performance, 26 (10), 4718-4731.

Scopus Eid


  • 2-s2.0-85028887009

Number Of Pages


  • 13

Start Page


  • 4718

End Page


  • 4731

Volume


  • 26

Issue


  • 10

Place Of Publication


  • United States