Skip to main content
Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
Journal
Identity
International Standard Serial Number (issn)
Other
Publication Venue For
-
An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension
2019
-
Comparative effect of Mn/Ti solute atoms and TiC/Ni 3 (Al,Ti) nano-particles on work hardening behaviour in Ni–Cu alloys fabricated by wire arc additive manufacturing
2019
-
Influence of tool pin eccentricity on microstructural evolution and mechanical properties of friction stir processed Al-5052 alloy
2019
-
A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension
2018
-
A new finite element model for multi-cycle accumulative roll-bonding process and experiment verification
2018
-
A novel graphene-stimulated semi-solid processing to fabricate advanced aluminium matrix nanocomposites
2018
-
Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behaviour
2018
-
High strain rate deformation of ARMOX 500T and effects on texture development using neutron diffraction techniques and SHPB testing
2018
-
Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling
2018
-
Microscopic plastic response in a bulk nano-structured TiAl intermetallic compound processed by high-pressure torsion
2018
-
Nucleation, coarsening and deformation accommodation mechanisms of ε-martensite in a high manganese steel
2018
-
A study on the texture evolution mechanism of nickel single crystal deformed by high pressure torsion
2017
-
An analysis of ridging of ferritic stainless steel 430
2017
-
Deformation mechanisms in nanotwinned copper by molecular dynamics simulation
2017
-
Innovative analysis of Luders band behaviour in X80 pipeline steel
2017
-
Investigation on compression behavior of TZM and La2O3 doped TZM Alloys at high temperature
2017
-
Microstructures and mechanical properties of Al-Li 2198-T8 alloys processed by two different severe plastic deformation methods: A comparative study
2017
-
Stacking fault tetrahedron induced plasticity in copper single crystal
2017
-
Structural metastability of “cold” repair welds in 2.25Cr-1Mo (P22) steel under elevated temperature and stress conditions
2017
-
Superior mechanical properties of microalloyed steels processed via a new technology based on austenite conditioning followed by warm deformation
2017
-
The effect of Nb solute and NbC precipitates on dynamic and metadynamic recrystallisation in Ni-30Fe-Nb-C model alloys
2017
-
The effect of cooling rate and coiling temperature on the niobium retention in Ultra-Thin Cast Strip steel
2017
-
A re-evaluation of "The micromechanics of twinning in a TWIP steel"
2016
-
Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets
2016
-
Effect of deformation on microstructure and mechanical properties of dual phase steel produced via strip casting simulation
2016
-
Effect of initial base metal temper on microstructure and mechanical properties of friction stir processed Al-7B04 alloy
2016
-
Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing
2016
-
In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel
2016
-
In-depth study of the mechanical properties for Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process
2016
-
Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloy
2016
-
Microstructural evolution, mechanical property and thermal stability of Al-Li 2198-T8 alloy processed by high pressure torsion
2016
-
Microstructure and mechanical properties of strip cast TRIP steel subjected to thermo-mechanical simulation
2016
-
Microstructures and mechanical properties of TRIP steel produced by strip casting simulated in the laboratory
2016
-
Solvothermal-assisted graphene encapsulation of SiC nanoparticles: A new horizon toward toughening aluminium matrix nanocomposites
2016
-
Strengthening and elongation mechanism of Lanthanum-doped Titanium-Zirconium-Molybdenum alloy
2016
-
Strengthening mechanisms and dislocation processes in <111> textured nanotwinned copper
2016
-
The effect of postproduction heat treatment on γ-TiAl alloys produced by the GTAW-based additive manufacturing process
2016
-
Correlation of microstructure and mechanical properties in friction stir welded 2198-T8 Al-Li alloy
2015
-
Graphene sheets encapsulating SiC nanoparticles: A roadmap towards enhancing tensile ductility of metal matrix composites
2015
-
Hot deformation behaviour of Ni-30Fe-C and Ni-30Fe-Nb-C model alloys
2015
-
Investigation of X70 line pipe steel fracture during single edge-notched tensile testing using acoustic emission monitoring
2015
-
Nanomechanical properties of TiCN and TiCN/Ti coatings on Ti prepared by Filtered Arc Deposition
2015
-
The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
2015
-
Constitutive analysis for hot deformation behaviour of novel bimetal consisting of pearlitic steel and low carbon steel
2014
-
Effect of inter-critically reheating temperature on microstructure and properties of simulated inter-critically reheated coarse grained heat affected zone in X70 steel
2014
-
Effect of niobium clustering and precipitation on strength of an NbTi-microalloyed ferritic steel
2014
-
Effects of processing optimisation on microstructure, texture, grain boundary and mechanical properties of Fe-17Cr ferritic stainless steel thick plates
2014
-
Numerical comparison between Berkovich and conical nano-indentations: mechanical behaviour and micro-texture evolution
2014
-
Physical thermo-mechanical simulation of magnesium: an in-situ diffraction study
2014
-
Precipitation and impact toughness of Nb-V stabilised 18Cr-2Mo ferritic stainless steel during isothermal aging
2014
-
Self-consistent modelling of lattice strains during the in-situ tensile loading of twinning induced plasticity steel
2014
-
The effect of ageing on microstructure and mechanical properties of powder Ti-5Al-5Mo-5V-1Cr-1Fe alloy
2014
-
Cluster strengthening of Nb-microalloyed ultra-thin cast strip steels produced by the CASTRIP®process
2013
-
Effect of deformation temperature on niobium clustering, precipitation and austenite recrystallisation in a Nb-Ti microalloyed steel
2013
-
Effects of tungsten addition and heat treatment conditions on microstructure and mechanical properties of microalloyed forging steels
2013
-
Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment
2013
-
Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment
2013
-
The effect of cooling rates on the microstructure and mechanical properties of thermo-mechanically processed Ti-Al-Mo-V-Cr-Fe alloys
2013
-
The effect of processing parameters on the dynamic recrystallisation behaviour of API-X70 pipeline steel
2013
-
Ultrafine grained AA1050/AA6061 composite produced by accumulative roll bonding
2013
-
Work hardening behaviors of a low carbon Nb-microalloyed Si-Mn quenching-partitioning steel with different cooling styles after partitioning
2013
-
Effect of bainitic transformation on bake hardening in TRIP assisted steel
2012
-
Effect of manganese content and microstructure on the susceptibility of X70 pipeline steel to hydrogen cracking
2012
-
Modeling texture evolution during ECAP of copper single crystal by crystal plasticity FEM
2012
-
Strain-induced phase transformation during thermo-mechanical processing of titanium alloys
2012
-
The evolution of microstructure of Ti-6Al-4V alloy during concurrent hot deformation and phase transformation
2012
-
Annealing behaviour and mechanical properties of severely deformed interstitial free steel
2011
-
Development of α-phase morphologies during low temperature isothermal heat treatment of a Ti–5Al–5Mo–5V–3Cr alloy
2011
-
Effect of annealing on the microstructure and mechanical properties of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel
2011
-
Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near -B titanium alloy
2011
-
Texture evolution of cold rolled and annealed Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel
2011
-
Effect of Cr and Mo on strain ageing behaviour of low carbon steel
2010
-
Effect of isothermal dissolution and re-precipitation of austenite on the mechanical properties of duplex structures
2010
-
Energy-based approach for the evaluation of low cycle fatigue behaviour of 2.25Cr-1Mo steel at elevated temperature
2010
-
In situ diffraction study on decomposition of Ti2AlN at 1500–1800 °C in vacuum
2010
-
Texture, microstructure and microhardness evolution of a hot-rolled high chromium cast iron
2010
-
Stored energy of a severely deformed interstitial free steel
2009
-
An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion
2008
-
Evolution of texture at the initial stages of continuous annealing of cold rolled dual-phase steel: effect of heating rate
2008
-
Kinetics of the peritectic reaction in an Fe-C alloy
2008
-
Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation
2008
-
Role of silicon in solidification microstructure in hot-dipped 55 wt% Al-Zn-Si coatings
2008
-
Semi-solid continuous casting-extrusion of AA6201 feed rods
2008
-
Stored energy, vacancies and thermal stability of ultra-fine grained copper
2008
-
Mitigation of sensitisation effects in unstabilised 12%Cr ferritic stainless steel welds
2007
-
Noticeable improvement in the desorption temperature from graphite in rehydrogenated MgH2/graphite composite
2007
Identity
International Standard Serial Number (issn)
Other
Publication Venue For
-
An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension
2019
-
Comparative effect of Mn/Ti solute atoms and TiC/Ni 3 (Al,Ti) nano-particles on work hardening behaviour in Ni–Cu alloys fabricated by wire arc additive manufacturing
2019
-
Influence of tool pin eccentricity on microstructural evolution and mechanical properties of friction stir processed Al-5052 alloy
2019
-
A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension
2018
-
A new finite element model for multi-cycle accumulative roll-bonding process and experiment verification
2018
-
A novel graphene-stimulated semi-solid processing to fabricate advanced aluminium matrix nanocomposites
2018
-
Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behaviour
2018
-
High strain rate deformation of ARMOX 500T and effects on texture development using neutron diffraction techniques and SHPB testing
2018
-
Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling
2018
-
Microscopic plastic response in a bulk nano-structured TiAl intermetallic compound processed by high-pressure torsion
2018
-
Nucleation, coarsening and deformation accommodation mechanisms of ε-martensite in a high manganese steel
2018
-
A study on the texture evolution mechanism of nickel single crystal deformed by high pressure torsion
2017
-
An analysis of ridging of ferritic stainless steel 430
2017
-
Deformation mechanisms in nanotwinned copper by molecular dynamics simulation
2017
-
Innovative analysis of Luders band behaviour in X80 pipeline steel
2017
-
Investigation on compression behavior of TZM and La2O3 doped TZM Alloys at high temperature
2017
-
Microstructures and mechanical properties of Al-Li 2198-T8 alloys processed by two different severe plastic deformation methods: A comparative study
2017
-
Stacking fault tetrahedron induced plasticity in copper single crystal
2017
-
Structural metastability of “cold” repair welds in 2.25Cr-1Mo (P22) steel under elevated temperature and stress conditions
2017
-
Superior mechanical properties of microalloyed steels processed via a new technology based on austenite conditioning followed by warm deformation
2017
-
The effect of Nb solute and NbC precipitates on dynamic and metadynamic recrystallisation in Ni-30Fe-Nb-C model alloys
2017
-
The effect of cooling rate and coiling temperature on the niobium retention in Ultra-Thin Cast Strip steel
2017
-
A re-evaluation of "The micromechanics of twinning in a TWIP steel"
2016
-
Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets
2016
-
Effect of deformation on microstructure and mechanical properties of dual phase steel produced via strip casting simulation
2016
-
Effect of initial base metal temper on microstructure and mechanical properties of friction stir processed Al-7B04 alloy
2016
-
Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing
2016
-
In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel
2016
-
In-depth study of the mechanical properties for Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process
2016
-
Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloy
2016
-
Microstructural evolution, mechanical property and thermal stability of Al-Li 2198-T8 alloy processed by high pressure torsion
2016
-
Microstructure and mechanical properties of strip cast TRIP steel subjected to thermo-mechanical simulation
2016
-
Microstructures and mechanical properties of TRIP steel produced by strip casting simulated in the laboratory
2016
-
Solvothermal-assisted graphene encapsulation of SiC nanoparticles: A new horizon toward toughening aluminium matrix nanocomposites
2016
-
Strengthening and elongation mechanism of Lanthanum-doped Titanium-Zirconium-Molybdenum alloy
2016
-
Strengthening mechanisms and dislocation processes in <111> textured nanotwinned copper
2016
-
The effect of postproduction heat treatment on γ-TiAl alloys produced by the GTAW-based additive manufacturing process
2016
-
Correlation of microstructure and mechanical properties in friction stir welded 2198-T8 Al-Li alloy
2015
-
Graphene sheets encapsulating SiC nanoparticles: A roadmap towards enhancing tensile ductility of metal matrix composites
2015
-
Hot deformation behaviour of Ni-30Fe-C and Ni-30Fe-Nb-C model alloys
2015
-
Investigation of X70 line pipe steel fracture during single edge-notched tensile testing using acoustic emission monitoring
2015
-
Nanomechanical properties of TiCN and TiCN/Ti coatings on Ti prepared by Filtered Arc Deposition
2015
-
The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding
2015
-
Constitutive analysis for hot deformation behaviour of novel bimetal consisting of pearlitic steel and low carbon steel
2014
-
Effect of inter-critically reheating temperature on microstructure and properties of simulated inter-critically reheated coarse grained heat affected zone in X70 steel
2014
-
Effect of niobium clustering and precipitation on strength of an NbTi-microalloyed ferritic steel
2014
-
Effects of processing optimisation on microstructure, texture, grain boundary and mechanical properties of Fe-17Cr ferritic stainless steel thick plates
2014
-
Numerical comparison between Berkovich and conical nano-indentations: mechanical behaviour and micro-texture evolution
2014
-
Physical thermo-mechanical simulation of magnesium: an in-situ diffraction study
2014
-
Precipitation and impact toughness of Nb-V stabilised 18Cr-2Mo ferritic stainless steel during isothermal aging
2014
-
Self-consistent modelling of lattice strains during the in-situ tensile loading of twinning induced plasticity steel
2014
-
The effect of ageing on microstructure and mechanical properties of powder Ti-5Al-5Mo-5V-1Cr-1Fe alloy
2014
-
Cluster strengthening of Nb-microalloyed ultra-thin cast strip steels produced by the CASTRIP®process
2013
-
Effect of deformation temperature on niobium clustering, precipitation and austenite recrystallisation in a Nb-Ti microalloyed steel
2013
-
Effects of tungsten addition and heat treatment conditions on microstructure and mechanical properties of microalloyed forging steels
2013
-
Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment
2013
-
Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment
2013
-
The effect of cooling rates on the microstructure and mechanical properties of thermo-mechanically processed Ti-Al-Mo-V-Cr-Fe alloys
2013
-
The effect of processing parameters on the dynamic recrystallisation behaviour of API-X70 pipeline steel
2013
-
Ultrafine grained AA1050/AA6061 composite produced by accumulative roll bonding
2013
-
Work hardening behaviors of a low carbon Nb-microalloyed Si-Mn quenching-partitioning steel with different cooling styles after partitioning
2013
-
Effect of bainitic transformation on bake hardening in TRIP assisted steel
2012
-
Effect of manganese content and microstructure on the susceptibility of X70 pipeline steel to hydrogen cracking
2012
-
Modeling texture evolution during ECAP of copper single crystal by crystal plasticity FEM
2012
-
Strain-induced phase transformation during thermo-mechanical processing of titanium alloys
2012
-
The evolution of microstructure of Ti-6Al-4V alloy during concurrent hot deformation and phase transformation
2012
-
Annealing behaviour and mechanical properties of severely deformed interstitial free steel
2011
-
Development of α-phase morphologies during low temperature isothermal heat treatment of a Ti–5Al–5Mo–5V–3Cr alloy
2011
-
Effect of annealing on the microstructure and mechanical properties of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel
2011
-
Role of alloying elements in microstructure evolution and alloying elements behaviour during sintering of a near -B titanium alloy
2011
-
Texture evolution of cold rolled and annealed Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel
2011
-
Effect of Cr and Mo on strain ageing behaviour of low carbon steel
2010
-
Effect of isothermal dissolution and re-precipitation of austenite on the mechanical properties of duplex structures
2010
-
Energy-based approach for the evaluation of low cycle fatigue behaviour of 2.25Cr-1Mo steel at elevated temperature
2010
-
In situ diffraction study on decomposition of Ti2AlN at 1500–1800 °C in vacuum
2010
-
Texture, microstructure and microhardness evolution of a hot-rolled high chromium cast iron
2010
-
Stored energy of a severely deformed interstitial free steel
2009
-
An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion
2008
-
Evolution of texture at the initial stages of continuous annealing of cold rolled dual-phase steel: effect of heating rate
2008
-
Kinetics of the peritectic reaction in an Fe-C alloy
2008
-
Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation
2008
-
Role of silicon in solidification microstructure in hot-dipped 55 wt% Al-Zn-Si coatings
2008
-
Semi-solid continuous casting-extrusion of AA6201 feed rods
2008
-
Stored energy, vacancies and thermal stability of ultra-fine grained copper
2008
-
Mitigation of sensitisation effects in unstabilised 12%Cr ferritic stainless steel welds
2007
-
Noticeable improvement in the desorption temperature from graphite in rehydrogenated MgH2/graphite composite
2007