Zhao, Jingwei

Overview

I am currently a Research Fellow and Co-supervisor of PhD students at the School of Mechanical, Materials, Mechatronic and Biomedical Engineering in the area of materials processing and manufacturing. My main research interests include microforming and micromanufacturing of metallic materials, metal rolling technology, and tribology and mechanics in materials manufacturing.

Top Publications

Year	Title
2018	Thermomechanical processing of advanced high strength steels Published in Progress in Materials Science
2014	Functions of tungsten alloying in microalloyed steels
2014	Effects of tungsten on the hydrogen embrittlement behaviour of microalloyed steels Published in Corrosion Science

Research Areas

Selected Publications

Journal Article

Year	Title
2021	Experimental Investigation on Micro Deep Drawing of Stainless Steel Foils with Different Microstructural Characteristics Published In Chinese Journal of Mechanical Engineering (English Edition)
2021	Interface-position-dependent structure evolution and mechanical behavior of corrugated cold rolled Cu/Al clad plate: experiment and simulation Published In Journal of Materials Research and Technology
2021	Interfacial bonding mechanism of Cu/Al composite plate produced by corrugated cold roll bonding Published In Rare Metals
2021	Local atomic structures of Gd and Zn atoms in extruded Mg-Gd-Zn alloys Published In Scripta Materialia
2021	Oil film characteristics and flow field analysis of asymmetrical hydrostatic support structure with full hydraulic fixed-length shear servo cylinder Published In Engineering Failure Analysis
2020	Analysis of flow behaviour and strain partitioning mechanism of bimetal composite under hot tensile conditions Published In International Journal of Mechanical Sciences
2020	Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel Published In Metals and Materials International
2020	Effect of travel speeds on microstructures and mechanical properties of friction-stir welded 5754 aluminum alloy sheets Published In Hanjie Xuebao/Transactions of the China Welding Institution
2020	Effects of cold rolling and annealing on the ridging behaviour of ferritic stainless steel Published In International Journal of Advanced Manufacturing Technology
2020	Grain growth and phase transformation in the welded joint HAZ of TiNbV microalloyed steel Published In Hanjie Xuebao/Transactions of the China Welding Institution
2020	Hot deformation behaviour and interfacial characteristics of bimetal composite at elevated temperatures Published In Intermetallics
2020	Interface characteristics and mechanical behavior of Cu/Al clad plate produced by the corrugated rolling technique Published In Journal of Manufacturing Processes
2020	Interfacial characteristics and mechanical properties of duplex stainless steel bimetal composite by heat treatment Published In Materials Science and Engineering A
2020	Microstructural evaluation of WC and steel dissimilar bilayered composite obtained by spark plasma sintering Published In International Journal of Advanced Manufacturing Technology
2020	Optimisation of sintering parameters for bonding nanocrystalline cemented tungsten carbide powder and solid high strength steel Published In Composite Interfaces
2020	Recent advances on multi-directional forging of titanium alloy Published In Suxing Gongcheng Xuebao/Journal of Plasticity Engineering
2020	Recent development in micromanufacturing of metallic materials Published In Materials
2020	Research on microstructure and properties of double cladding stainless steel/carbon steel clad plate by hot rolling Published In Suxing Gongcheng Xuebao/Journal of Plasticity Engineering
2020	Revealing the recrystallization behavior of an excellent strip casting 4.5 wt% Si non-oriented electrical steel Published In Materials Characterization
2020	Understanding the role of water-based nanolubricants in micro flexible rolling of aluminium Published In Tribology International
2019	Analysis and characterisation of WC-10Co and AISI 4340 steel bimetal composite produced by powder–solid diffusion bonding Published In International Journal of Advanced Manufacturing Technology
2019	Analysis of surface roughness alteration in micro flexible rolling Published In Wear
2019	Analysis of surface roughness evolution of ferritic stainless steel using crystal plasticity finite element method Published In Journal of Materials Research and Technology
2019	Effect of Cube Texture on the Planar Anisotropy in a Novel Al-Mg-Si-Zn Alloy Published In Materials China
2019	Effect of Tool Pin Eccentricity on the Microstructure and Mechanical Properties of Friction Stir Processed Al-6061 Alloy Published In Journal of Materials Engineering and Performance
2019	Effect of graphene on the tribolayer of aluminum matrix composite during dry sliding wear Published In Surface and Coatings Technology
2019	Effect of water-based nanolubricant containing nano-TiO2 on friction and wear behaviour of chrome steel at ambient and elevated temperatures Published In Wear
2019	Effects of Holding Time on the Sintering of Cemented Tungsten Carbide Powder and Bonding with High-Strength Steel Wire Published In Journal of Materials Engineering and Performance
2019	Effects of micro flexible rolling and annealing on microstructure, microhardness and texture of aluminium alloy Published In Materials Characterization
2019	Experimental investigation on the mechanical and tribological coupled behaviour of bimetal composite under different states Published In Surface Topography: Metrology and Properties
2019	Graphene encapsulated SiC nanoparticles as tribology-favoured nanofillers in aluminium composite Published In Composites Part B: Engineering
2019	Influence of tool pin eccentricity on microstructural evolution and mechanical properties of friction stir processed Al-5052 alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2019	Investigation into the dissimilar friction stir welding of AA5052 and AA6061 aluminum alloys using pin-eccentric stir tool Published In Metals
2019	Micromanufacturing of composite materials: A review Published In International Journal of Extreme Manufacturing
2019	Microstructure and mechanical properties of thin varying thickness strips with different transition zones produced by micro flexible rolling Published In Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture
2019	Microstructure and tribological behaviour of alumina composites reinforced with SiC-graphene core-shell nanoparticles Published In Tribology International
2019	Quantification of texture-induced ridging in ferritic stainless steels 430 and 430LR during tensile deformation Published In Journal of Materials Research and Technology
2019	Study on edge cracking of copper foils in micro rolling Published In Journal of Materials Science and Engineering A
2018	Analysis of bending characteristics of bimetal steel composite Published In International Journal of Mechanical Sciences
2018	Analysis of contact mechanics in micro flexible rolling Published In Procedia Manufacturing
2018	Analysis of oil-in-water based nanolubricants with varying mass fractions of oil and TiO2 nanoparticles Published In Wear
2018	Analysis of sintering and bonding of ultrafine WC powder and stainless steel by hot compaction diffusion bonding Published In Fusion Engineering and Design
2018	Comparison of Multiphase Flow in a Continuous Casting Tundish Using Two Types of Industrialized Ladle Shrouds Published In Journal of Metals
2018	Effect of annealing on microstructure and hardness of thin aluminium strips fabricated by micro flexible rolling Published In MATEC Web of Conferences
2018	Effects of friction-stir processing with water cooling on the properties of an Al–Zn–Mg–Cu Alloy Published In Materials Science and Technology
2018	Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles in hot rolling of 304 stainless steel Published In Journal of Materials Processing Technology
2018	Effects of rolling processes on ridging generation of ferritic stainless steel Published In Materials Characterization
2018	Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel Published In Tribology International
2018	Hot deformation behavior and processing maps of Ti-6Al-4V alloy with starting fully lamellar structure Published In Journal of Materials Research
2018	In Situ synthesis of SiC-graphene core-shell nanoparticles using wet ball milling Published In Ceramics International
2018	Microstructure and mechanical properties of aluminium-graphene composite powders produced by mechanical milling Published In Mechanics of Advanced Materials and Modern Processes
2018	Numerical and experimental investigation on the forming behaviour of stainless/carbon steel bimetal composite Published In International Journal of Advanced Manufacturing Technology
2018	Performance Evaluation and Lubrication Mechanism of Water-Based Nanolubricants Containing Nano-TiO2 in Hot Steel Rolling Published In Lubricants
2018	Synthesis and characterization of aluminum matrix composites reinforced with sic-graphene core-shell nanoparticles Published In Materials Science Forum
2018	Thermomechanical processing of advanced high strength steels Published In Progress in Materials Science
2018	Water Cooling Effects on the Microstructural Evolution and Mechanical Properties of Friction-Stir-Processed Al-6061 Alloy Published In Transactions of the Indian Institute of Metals
2017	A review of modern advancements in micro drilling techniques Published In Journal of Manufacturing Processes
2017	A study of the tribological behaviour of TiO2 nano-additive water-based lubricants Published In Tribology International
2017	An analysis of ridging of ferritic stainless steel 430 Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Analysis of TiO2 nano-additive water-based lubricants in hot rolling of microalloyed steel Published In Journal of Manufacturing Processes
2017	Developing a self-piercing riveting with flange pipe rivet joining aluminum sheets Published In International Journal of Advanced Manufacturing Technology
2017	Effects of nano-TiO2 additive in oil-in-water lubricant on contact angle and antiscratch behavior Published In Tribology Transactions
2017	Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles in hot rolling of 304 stainless steel Published In Procedia Engineering
2017	Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles on the tribological behaviour of oxidised high-speed steel Published In Tribology International
2017	Experimental and numerical study on micro deep drawing with aluminium-copper composite material Published In Procedia Engineering
2017	Fabrication and properties of strip casting 4.5 wt% Si steel thin sheet Published In Journal of Magnetism and Magnetic Materials
2017	Microstructural and Mechanical Characterization of a Dissimilar Friction Stir-Welded AA5083-AA7B04 Butt Joint Published In Journal of Materials Engineering and Performance
2017	Size effects in micro rolling of metals Published In IOP Conference Series: Materials Science and Engineering
2017	Study on growth behaviour of oxide scale and its effects on tribological property of nano-TiO2 additive oil-in-water lubricant Published In Wear
2017	Wear and friction behaviour of high-speed steel and indefinite chill material for rolling ferritic stainless steels Published In Wear
2016	A Comparative study of fluid flow and mass transfer in a trumpet-shaped ladle shroud using large eddy simulation Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2016	A novel nano-TiO2 additive oil-in-water lubricant for hot steel rolling Published In Materials Science Forum
2016	A review of microstructure and microtexture of tertiary oxide scale in a hot strip mill Published In Key Engineering Materials
2016	Analysis of {411} <148> recrystallisation texture in twin-roll strip casting of 4.5 wt% Si non-oriented electrical steel Published In Materials Letters
2016	Breakaway oxidation behaviour of ferritic stainless steels at 1150 °C in humid air Published In Corrosion Science
2016	Computational and experimental study on the critical unstable shape of cold-rolled strip Published In Steel Research International
2016	Effect of initial base metal temper on microstructure and mechanical properties of friction stir processed Al-7B04 alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Effect of strain rate and temperature on hot workability and flow behaviour of duplex stainless steel Published In Ironmaking and Steelmaking
2016	Effects of temperature and strain rate on flow behavior and microstructural evolution of super duplex stainless steel under hot deformation Published In Journal of Iron and Steel Research International
2016	Experimental and numerical study on the effect of ZDDP films on sticking during hot rolling of ferritic stainless steel strip Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Flow behaviour and constitutive modelling of a ferritic stainless steel at elevated temperatures Published In Metals and Materials International
2016	High Temperature Oxidation of Indefinite Chill Roll Material Under Dry and Humid Atmospheres Published In Steel Research International
2016	Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Influences of temperature and grain size on the material deformability in microforming process Published In International Journal of Material Forming
2016	Large magnetoresistance in highly textured Mn44.7Ni43.5Sn11.8 melt spun ribbons Published In Smart Materials and Structures
2016	Study on micro hydro-mechanical deep drawing using finite element method Published In MATEC Web of Conferences
2016	Study on tribological property of nano-TiO2 additive oil-in-water lubricant during hot rolling Published In Materials Science Forum
2016	The role of oxide-scale microtexture on tribological behaviour in the nanoparticle lubrication of hot rolling Published In Tribology International
2015	A comparison of texture development in an experimental and industrial tertiary oxide scale in a hot strip mill Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2015	A switch-like magnetoresistance of ferromagnetic Ni-Mn-Ga ribbon during martensitic transformation Published In Materials Letters
2015	Analysis of the microstructure, texture and magnetic properties of strip casting 4.5wt.% Si non-oriented electrical steel Published In Materials and Design
2015	Crystallographic texture based analysis of Fe3O4/α-Fe2O3 scale formed on a hot-rolled microalloyed steel Published In ISIJ Internationa
2015	Dependence of texture development on the grain size of tertiary oxide scales formed on a microalloyed steel Published In Surface and Coatings Technology
2015	Development of new microalloyed steel by alloying with tungsten Published In Applied Mechanics and Materials
2015	Effect of extreme pressure additives on the deformation behavior of oxide scale during the hot rolling of ferritic stainless steel strips Published In Tribology Transactions
2015	Effect of extreme pressure agents on the anti-scratch behaviour of high-speed steel material Published In Tribology International
2015	Effect of pre-quenching process on microstructure and mechanical properties in a Nb-microalloyed low carbon Q-P steel Published In Materials Science Forum
2015	Effect of welding heat input and post-welded heat treatment on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy Published In Nonferrous Metals Society of China Transactions
2015	Effects of grain boundaries in oxide scale on tribological properties of nanoparticles lubrication Published In Wear
2015	High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air Published In Metals and Materials International
2015	Investigation of oxide scale on ferritic stainless steel B445J1M and its tribological effect in hot rolling Published In Wear
2015	Local strain analysis of the tertiary oxide scale formed on a hot-rolled steel strip via EBSD Published In Surface and Coatings Technology
2015	Microstructure and microtexture evolutions of deformed oxide layers on a hot-rolled microalloyed steel Published In Corrosion Science
2015	Oxide scale characterization of ferritic stainless steel and its deformation and friction in hot rolling Published In Tribology International
2015	The effects of vacuum annealing temperatures on the microstructure, mechanical properties and electrical resistivity of Mg-3Al-1Zn alloy ribbons Published In Vacuum
2015	Thermal stability and properties of deformation-processed Cu-Fe in situ composites Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	3D FEM analysis of strip shape during multi-pass rolling in a 6-high CVC cold rolling mill Published In International Journal of Advanced Manufacturing Technology
2014	Characteristics of oxide scale formed on ferritic stainless steels in simulated reheating atmosphere Published In Surface and Coatings Technology
2014	Characteristics of unsteady lubrication film in metal-forming process with dynamic roll gap Published In Journal of Central South University
2014	Effect of a grain-refined microalloyed steel substrate on the formation mechanism of a tight oxide scale Published In Corrosion Science
2014	Effect of directional solidification rate on the microstructure and properties of deformation-processed Cu-7Cr-0.1Ag in situ composites Published In Journal of Alloys and Compounds
2014	Effect of iron content on the strength and conductivity of Cu-Fe in situ composite Published In Applied Mechanics and Materials
2014	Effects of hydrogen on the critical conditions for dynamic recrystallization of titanium alloy during hot deformation Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Effects of tungsten on the hydrogen embrittlement behaviour of microalloyed steels Published In Corrosion Science
2014	FEM analysis of profile control capability during rolling in a 6-high CVC cold rolling mill Published In Advanced Materials Research
2014	Hydrogen-induced hardening of Ti-6Al-4V alloy in β phase field Published In Materials and Design
2014	Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network Published In Computational Materials Science
2014	Molecular dynamics simulation of fracture behaviors of < 110 > tilt grain boundaries in gamma-TiAl Published In Nonferrous Metals Society of China Transactions
2014	Study of intermetallics and phase equilibria of Mg-Zn-La system in Mg-rich corner at 345 °c Published In Journal of Alloys and Compounds
2014	Tribological analysis of oxide scales during cooling process of rolled microalloyed steel Published In Advanced Materials Research
2013	Analysis of elemental segregation in a microalloyed cast steel Published In Advanced Materials Research
2013	Effect of cooling rate on oxidation behaviour of microalloyed steel Published In Applied Mechanics and Materials
2013	Effect of water vapor on oxidation of ferritic stainless steel 21Cr- 0.6Mo-Nb-Ti in simulated reheating environment Published In Advanced Materials Research
2013	Effects of hydrogen on the hot deformation behaviour of Ti-6Al-4V alloy: experimental and constitutive model studies Published In Journal of Alloys and Compounds
2013	Effects of tungsten addition and heat treatment conditions on microstructure and mechanical properties of microalloyed forging steels Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2013	Effects of tungsten addition on the microstructure and mechanical properties of microalloyed forging steels Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2013	Effects of tungsten on continuous cooling transformation characteristics of microalloyed steels Published In Materials and Design
2013	Enhancing impact fracture toughness and tensile properties of a microalloyed cast steel by hot forging and post-forging heat treatment processes Published In Materials and Design
2013	Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2013	Multi-factor coupling system characteristic of the dynamic roll gap in the high-speed rolling mill during the unsteady lubrication process Published In Tribology International
2013	Process design strategies for producing heavy section steel with improved quality Published In Advanced Materials Research
2013	Work hardening behaviors of a low carbon Nb-microalloyed Si-Mn quenching-partitioning steel with different cooling styles after partitioning Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2012	Effect of tungsten addition on the mechanical properties and corrosion resistance of S355NL forging steel Published In Metals and Materials International
2010	Effect of thermo hydrogen treatment on lattice defects and microstructure refinement of Ti6Al4V alloy Published In International Journal of Hydrogen Energy
2010	Influence of hydrogen content on hot deformation behavior and microstructural evolution of Ti600 alloy Published In Journal of Alloys and Compounds
2009	Influence of thermo hydrogen treatment on hot deformation behavior of Ti600 alloy Published In Transactions of Nonferrous Metals Society of China (English Edition)
2008	Influence of hydrogenation on microstructure and hardness of Ti6Al4V alloy Published In Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
2008	Influence of hydrogenation on microstructures and microhardness of Ti6Al4V alloy Published In Transactions of Nonferrous Metals Society of China (English Edition)
2008	Influence of thermohydrogen treatment on microstructural evolution and hardness of Ti600 alloy Published In Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research
2008	Mechanical behaviors of Ti6A14V alloy during low-temperature super plastic deformation Published In Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research
2008	Modeling of dynamic recrystallization of Ti6Al4V alloy using a cellular automaton approach Published In Acta Metallurgica Sinica (English Letters)
2008	Thermodynamic calculation on the formation of titanium hydride Published In Chinese Journal of Chemical Physics

Book

Year	Title
2017	Microforming Technology: Theory, Simulation and Practice Publisher London, United Kingdom
2017	Rolling of advanced high strength steels: Theory, simulation and practice Publisher Boca Raton, USA
2014	Functions of tungsten alloying in microalloyed steels Publisher https://www.novapublishers.com/catalog/product_info.php?products_id=50596

Chapter

Year	Title
2017	Chapter 1 Fundamentals of Microforming Published In Microforming Technology Publisher Elsevier
2017	Chapter 10 Simulation of Micro Deep Drawing Published In Microforming Technology Publisher Elsevier
2017	Chapter 11 Simulation of Micro Hydromechanical Deep Drawing Published In Microforming Technology Publisher Elsevier
2017	Chapter 12 Simulation of Micro Bending Published In Microforming Technology Publisher Elsevier
2017	Chapter 13 Simulation of Micro Compression Published In Microforming Technology Publisher Elsevier
2017	Chapter 14 Practice of Micro Cross Wedge Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 15 Practice of Micro Flexible Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 16 Practice of Micro Ultrathin Strip Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 17 Practice of Micro Deep Drawing Published In Microforming Technology Publisher Elsevier
2017	Chapter 18 Practice of Micro Hydromechanical Deep Drawing Published In Microforming Technology Publisher Elsevier
2017	Chapter 19 Practice of Micro Bending Published In Microforming Technology Publisher Elsevier
2017	Chapter 2 Size Effects in Microforming Published In Microforming Technology Publisher Elsevier
2017	Chapter 20 Practice of Micro Compression Published In Microforming Technology Publisher Elsevier
2017	Chapter 3 Scaling Laws Published In Microforming Technology Publisher Elsevier
2017	Chapter 4 Strain Gradient Plasticity Theory Published In Microforming Technology Publisher Elsevier
2017	Chapter 5 Crystal Plasticity Theory Published In Microforming Technology Publisher Elsevier
2017	Chapter 6 Simulation Models in Microforming Published In Microforming Technology Publisher Elsevier
2017	Chapter 7 Simulation of Micro Cross Wedge Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 8 Simulation of Micro Flexible Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 9 Simulation of Micro Ultrathin Strip Rolling Published In Microforming Technology Publisher Elsevier
2017	Preface Published In Microforming Technology Publisher Elsevier
2016	Positive roles of hydrogen in titanium alloys Published In Titanium Alloys: Types, Properties and Research Insights Publisher New York, United States

Conference Paper

Year	Title
2018	Effect of cold rolling reduction on recrystallization behaviors of aa5754 sheets in a short annealing time Published In Materials Science Forum
2018	Investigation on the formability of Al-Cu composite material in micro deep drawing process with different lubrication conditions Published In ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
2018	Investigation on the formability of Al-Cu composite material in micro deep drawing process with different lubrication conditions Published In ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
2018	Numerical investigation on the forming behaviour of stainless/carbon steel bimetal composite Published In 2018 The 3rd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2018)
2018	Preface Published In IOP Conference Series: Materials Science and Engineering
2017	Numerical modelling of micro deep drawing with aluminium-copper composite considering surface roughness Published In ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology
2017	Tribological behaviour of water-based nanolubricant containing TiO2 nanoparticles on ferritic stainless steel Published In ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology
2011	Hydrogen embrittlement of low carbon HSLA steel during slow strain rate test Published In Advanced Materials Research
2007	Influences of hydrogenation on microstructure and microhardness of Ti6Al4V alloy Published In PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3
2007	Influences of hydrogenation on microstructure and microhardness of Ti6Al4V alloy Published In Materials Science Forum

Investigator On

Year	Title
2019 - 2021	Mechanics of the shape of thin strip with varying thickness Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2016	Fundamental research on applications of roll-bonding clad steel plates in mining equipment Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
2016	Novel forming simulation and performance investigation on automotive frame application of the metastable austenitic high strength stainless steel Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
2015	Micromanufacturing and the mechanics of novel composite micro drills Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	A Study on Static and Dynamic Characteristics of Aerostatic Bearings	Cui, Hailong
Doctor of Philosophy	A Study of Hot-Dip Galvanizing of Hot-Rolled Steel Strip Without Acid-Pickling	Lin, Fei
Master of Research - EIS	Numerical and Experimental Analysis of Stir Welding Process	Morshed, Afshana

Keywords

materials processing, microforming, micromanufacturing, rolling technology, nano lubrication

Located In Facility

Building 8, Room G12

Scopus Id

56433769900

Top Publications

Year	Title
2018	Thermomechanical processing of advanced high strength steels Published in Progress in Materials Science
2014	Functions of tungsten alloying in microalloyed steels
2014	Effects of tungsten on the hydrogen embrittlement behaviour of microalloyed steels Published in Corrosion Science

Research Areas

Selected Publications

Journal Article

Year	Title
2021	Experimental Investigation on Micro Deep Drawing of Stainless Steel Foils with Different Microstructural Characteristics Published In Chinese Journal of Mechanical Engineering (English Edition)
2021	Interface-position-dependent structure evolution and mechanical behavior of corrugated cold rolled Cu/Al clad plate: experiment and simulation Published In Journal of Materials Research and Technology
2021	Interfacial bonding mechanism of Cu/Al composite plate produced by corrugated cold roll bonding Published In Rare Metals
2021	Local atomic structures of Gd and Zn atoms in extruded Mg-Gd-Zn alloys Published In Scripta Materialia
2021	Oil film characteristics and flow field analysis of asymmetrical hydrostatic support structure with full hydraulic fixed-length shear servo cylinder Published In Engineering Failure Analysis
2020	Analysis of flow behaviour and strain partitioning mechanism of bimetal composite under hot tensile conditions Published In International Journal of Mechanical Sciences
2020	Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel Published In Metals and Materials International
2020	Effect of travel speeds on microstructures and mechanical properties of friction-stir welded 5754 aluminum alloy sheets Published In Hanjie Xuebao/Transactions of the China Welding Institution
2020	Effects of cold rolling and annealing on the ridging behaviour of ferritic stainless steel Published In International Journal of Advanced Manufacturing Technology
2020	Grain growth and phase transformation in the welded joint HAZ of TiNbV microalloyed steel Published In Hanjie Xuebao/Transactions of the China Welding Institution
2020	Hot deformation behaviour and interfacial characteristics of bimetal composite at elevated temperatures Published In Intermetallics
2020	Interface characteristics and mechanical behavior of Cu/Al clad plate produced by the corrugated rolling technique Published In Journal of Manufacturing Processes
2020	Interfacial characteristics and mechanical properties of duplex stainless steel bimetal composite by heat treatment Published In Materials Science and Engineering A
2020	Microstructural evaluation of WC and steel dissimilar bilayered composite obtained by spark plasma sintering Published In International Journal of Advanced Manufacturing Technology
2020	Optimisation of sintering parameters for bonding nanocrystalline cemented tungsten carbide powder and solid high strength steel Published In Composite Interfaces
2020	Recent advances on multi-directional forging of titanium alloy Published In Suxing Gongcheng Xuebao/Journal of Plasticity Engineering
2020	Recent development in micromanufacturing of metallic materials Published In Materials
2020	Research on microstructure and properties of double cladding stainless steel/carbon steel clad plate by hot rolling Published In Suxing Gongcheng Xuebao/Journal of Plasticity Engineering
2020	Revealing the recrystallization behavior of an excellent strip casting 4.5 wt% Si non-oriented electrical steel Published In Materials Characterization
2020	Understanding the role of water-based nanolubricants in micro flexible rolling of aluminium Published In Tribology International
2019	Analysis and characterisation of WC-10Co and AISI 4340 steel bimetal composite produced by powder–solid diffusion bonding Published In International Journal of Advanced Manufacturing Technology
2019	Analysis of surface roughness alteration in micro flexible rolling Published In Wear
2019	Analysis of surface roughness evolution of ferritic stainless steel using crystal plasticity finite element method Published In Journal of Materials Research and Technology
2019	Effect of Cube Texture on the Planar Anisotropy in a Novel Al-Mg-Si-Zn Alloy Published In Materials China
2019	Effect of Tool Pin Eccentricity on the Microstructure and Mechanical Properties of Friction Stir Processed Al-6061 Alloy Published In Journal of Materials Engineering and Performance
2019	Effect of graphene on the tribolayer of aluminum matrix composite during dry sliding wear Published In Surface and Coatings Technology
2019	Effect of water-based nanolubricant containing nano-TiO2 on friction and wear behaviour of chrome steel at ambient and elevated temperatures Published In Wear
2019	Effects of Holding Time on the Sintering of Cemented Tungsten Carbide Powder and Bonding with High-Strength Steel Wire Published In Journal of Materials Engineering and Performance
2019	Effects of micro flexible rolling and annealing on microstructure, microhardness and texture of aluminium alloy Published In Materials Characterization
2019	Experimental investigation on the mechanical and tribological coupled behaviour of bimetal composite under different states Published In Surface Topography: Metrology and Properties
2019	Graphene encapsulated SiC nanoparticles as tribology-favoured nanofillers in aluminium composite Published In Composites Part B: Engineering
2019	Influence of tool pin eccentricity on microstructural evolution and mechanical properties of friction stir processed Al-5052 alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2019	Investigation into the dissimilar friction stir welding of AA5052 and AA6061 aluminum alloys using pin-eccentric stir tool Published In Metals
2019	Micromanufacturing of composite materials: A review Published In International Journal of Extreme Manufacturing
2019	Microstructure and mechanical properties of thin varying thickness strips with different transition zones produced by micro flexible rolling Published In Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture
2019	Microstructure and tribological behaviour of alumina composites reinforced with SiC-graphene core-shell nanoparticles Published In Tribology International
2019	Quantification of texture-induced ridging in ferritic stainless steels 430 and 430LR during tensile deformation Published In Journal of Materials Research and Technology
2019	Study on edge cracking of copper foils in micro rolling Published In Journal of Materials Science and Engineering A
2018	Analysis of bending characteristics of bimetal steel composite Published In International Journal of Mechanical Sciences
2018	Analysis of contact mechanics in micro flexible rolling Published In Procedia Manufacturing
2018	Analysis of oil-in-water based nanolubricants with varying mass fractions of oil and TiO2 nanoparticles Published In Wear
2018	Analysis of sintering and bonding of ultrafine WC powder and stainless steel by hot compaction diffusion bonding Published In Fusion Engineering and Design
2018	Comparison of Multiphase Flow in a Continuous Casting Tundish Using Two Types of Industrialized Ladle Shrouds Published In Journal of Metals
2018	Effect of annealing on microstructure and hardness of thin aluminium strips fabricated by micro flexible rolling Published In MATEC Web of Conferences
2018	Effects of friction-stir processing with water cooling on the properties of an Al–Zn–Mg–Cu Alloy Published In Materials Science and Technology
2018	Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles in hot rolling of 304 stainless steel Published In Journal of Materials Processing Technology
2018	Effects of rolling processes on ridging generation of ferritic stainless steel Published In Materials Characterization
2018	Friction and wear characteristics of TiO2 nano-additive water-based lubricant on ferritic stainless steel Published In Tribology International
2018	Hot deformation behavior and processing maps of Ti-6Al-4V alloy with starting fully lamellar structure Published In Journal of Materials Research
2018	In Situ synthesis of SiC-graphene core-shell nanoparticles using wet ball milling Published In Ceramics International
2018	Microstructure and mechanical properties of aluminium-graphene composite powders produced by mechanical milling Published In Mechanics of Advanced Materials and Modern Processes
2018	Numerical and experimental investigation on the forming behaviour of stainless/carbon steel bimetal composite Published In International Journal of Advanced Manufacturing Technology
2018	Performance Evaluation and Lubrication Mechanism of Water-Based Nanolubricants Containing Nano-TiO2 in Hot Steel Rolling Published In Lubricants
2018	Synthesis and characterization of aluminum matrix composites reinforced with sic-graphene core-shell nanoparticles Published In Materials Science Forum
2018	Thermomechanical processing of advanced high strength steels Published In Progress in Materials Science
2018	Water Cooling Effects on the Microstructural Evolution and Mechanical Properties of Friction-Stir-Processed Al-6061 Alloy Published In Transactions of the Indian Institute of Metals
2017	A review of modern advancements in micro drilling techniques Published In Journal of Manufacturing Processes
2017	A study of the tribological behaviour of TiO2 nano-additive water-based lubricants Published In Tribology International
2017	An analysis of ridging of ferritic stainless steel 430 Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Analysis of TiO2 nano-additive water-based lubricants in hot rolling of microalloyed steel Published In Journal of Manufacturing Processes
2017	Developing a self-piercing riveting with flange pipe rivet joining aluminum sheets Published In International Journal of Advanced Manufacturing Technology
2017	Effects of nano-TiO2 additive in oil-in-water lubricant on contact angle and antiscratch behavior Published In Tribology Transactions
2017	Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles in hot rolling of 304 stainless steel Published In Procedia Engineering
2017	Effects of oil-in-water based nanolubricant containing TiO2 nanoparticles on the tribological behaviour of oxidised high-speed steel Published In Tribology International
2017	Experimental and numerical study on micro deep drawing with aluminium-copper composite material Published In Procedia Engineering
2017	Fabrication and properties of strip casting 4.5 wt% Si steel thin sheet Published In Journal of Magnetism and Magnetic Materials
2017	Microstructural and Mechanical Characterization of a Dissimilar Friction Stir-Welded AA5083-AA7B04 Butt Joint Published In Journal of Materials Engineering and Performance
2017	Size effects in micro rolling of metals Published In IOP Conference Series: Materials Science and Engineering
2017	Study on growth behaviour of oxide scale and its effects on tribological property of nano-TiO2 additive oil-in-water lubricant Published In Wear
2017	Wear and friction behaviour of high-speed steel and indefinite chill material for rolling ferritic stainless steels Published In Wear
2016	A Comparative study of fluid flow and mass transfer in a trumpet-shaped ladle shroud using large eddy simulation Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2016	A novel nano-TiO2 additive oil-in-water lubricant for hot steel rolling Published In Materials Science Forum
2016	A review of microstructure and microtexture of tertiary oxide scale in a hot strip mill Published In Key Engineering Materials
2016	Analysis of {411} <148> recrystallisation texture in twin-roll strip casting of 4.5 wt% Si non-oriented electrical steel Published In Materials Letters
2016	Breakaway oxidation behaviour of ferritic stainless steels at 1150 °C in humid air Published In Corrosion Science
2016	Computational and experimental study on the critical unstable shape of cold-rolled strip Published In Steel Research International
2016	Effect of initial base metal temper on microstructure and mechanical properties of friction stir processed Al-7B04 alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Effect of strain rate and temperature on hot workability and flow behaviour of duplex stainless steel Published In Ironmaking and Steelmaking
2016	Effects of temperature and strain rate on flow behavior and microstructural evolution of super duplex stainless steel under hot deformation Published In Journal of Iron and Steel Research International
2016	Experimental and numerical study on the effect of ZDDP films on sticking during hot rolling of ferritic stainless steel strip Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Flow behaviour and constitutive modelling of a ferritic stainless steel at elevated temperatures Published In Metals and Materials International
2016	High Temperature Oxidation of Indefinite Chill Roll Material Under Dry and Humid Atmospheres Published In Steel Research International
2016	Influence of multi-pass friction stir processing on the microstructure and mechanical properties of Al-5083 alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Influences of temperature and grain size on the material deformability in microforming process Published In International Journal of Material Forming
2016	Large magnetoresistance in highly textured Mn44.7Ni43.5Sn11.8 melt spun ribbons Published In Smart Materials and Structures
2016	Study on micro hydro-mechanical deep drawing using finite element method Published In MATEC Web of Conferences
2016	Study on tribological property of nano-TiO2 additive oil-in-water lubricant during hot rolling Published In Materials Science Forum
2016	The role of oxide-scale microtexture on tribological behaviour in the nanoparticle lubrication of hot rolling Published In Tribology International
2015	A comparison of texture development in an experimental and industrial tertiary oxide scale in a hot strip mill Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2015	A switch-like magnetoresistance of ferromagnetic Ni-Mn-Ga ribbon during martensitic transformation Published In Materials Letters
2015	Analysis of the microstructure, texture and magnetic properties of strip casting 4.5wt.% Si non-oriented electrical steel Published In Materials and Design
2015	Crystallographic texture based analysis of Fe3O4/α-Fe2O3 scale formed on a hot-rolled microalloyed steel Published In ISIJ Internationa
2015	Dependence of texture development on the grain size of tertiary oxide scales formed on a microalloyed steel Published In Surface and Coatings Technology
2015	Development of new microalloyed steel by alloying with tungsten Published In Applied Mechanics and Materials
2015	Effect of extreme pressure additives on the deformation behavior of oxide scale during the hot rolling of ferritic stainless steel strips Published In Tribology Transactions
2015	Effect of extreme pressure agents on the anti-scratch behaviour of high-speed steel material Published In Tribology International
2015	Effect of pre-quenching process on microstructure and mechanical properties in a Nb-microalloyed low carbon Q-P steel Published In Materials Science Forum
2015	Effect of welding heat input and post-welded heat treatment on hardness of stir zone for friction stir-welded 2024-T3 aluminum alloy Published In Nonferrous Metals Society of China Transactions
2015	Effects of grain boundaries in oxide scale on tribological properties of nanoparticles lubrication Published In Wear
2015	High temperature oxidation behaviour of ferritic stainless steel SUS 430 in humid air Published In Metals and Materials International
2015	Investigation of oxide scale on ferritic stainless steel B445J1M and its tribological effect in hot rolling Published In Wear
2015	Local strain analysis of the tertiary oxide scale formed on a hot-rolled steel strip via EBSD Published In Surface and Coatings Technology
2015	Microstructure and microtexture evolutions of deformed oxide layers on a hot-rolled microalloyed steel Published In Corrosion Science
2015	Oxide scale characterization of ferritic stainless steel and its deformation and friction in hot rolling Published In Tribology International
2015	The effects of vacuum annealing temperatures on the microstructure, mechanical properties and electrical resistivity of Mg-3Al-1Zn alloy ribbons Published In Vacuum
2015	Thermal stability and properties of deformation-processed Cu-Fe in situ composites Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	3D FEM analysis of strip shape during multi-pass rolling in a 6-high CVC cold rolling mill Published In International Journal of Advanced Manufacturing Technology
2014	Characteristics of oxide scale formed on ferritic stainless steels in simulated reheating atmosphere Published In Surface and Coatings Technology
2014	Characteristics of unsteady lubrication film in metal-forming process with dynamic roll gap Published In Journal of Central South University
2014	Effect of a grain-refined microalloyed steel substrate on the formation mechanism of a tight oxide scale Published In Corrosion Science
2014	Effect of directional solidification rate on the microstructure and properties of deformation-processed Cu-7Cr-0.1Ag in situ composites Published In Journal of Alloys and Compounds
2014	Effect of iron content on the strength and conductivity of Cu-Fe in situ composite Published In Applied Mechanics and Materials
2014	Effects of hydrogen on the critical conditions for dynamic recrystallization of titanium alloy during hot deformation Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Effects of tungsten on the hydrogen embrittlement behaviour of microalloyed steels Published In Corrosion Science
2014	FEM analysis of profile control capability during rolling in a 6-high CVC cold rolling mill Published In Advanced Materials Research
2014	Hydrogen-induced hardening of Ti-6Al-4V alloy in β phase field Published In Materials and Design
2014	Modelling of the hot deformation behaviour of a titanium alloy using constitutive equations and artificial neural network Published In Computational Materials Science
2014	Molecular dynamics simulation of fracture behaviors of < 110 > tilt grain boundaries in gamma-TiAl Published In Nonferrous Metals Society of China Transactions
2014	Study of intermetallics and phase equilibria of Mg-Zn-La system in Mg-rich corner at 345 °c Published In Journal of Alloys and Compounds
2014	Tribological analysis of oxide scales during cooling process of rolled microalloyed steel Published In Advanced Materials Research
2013	Analysis of elemental segregation in a microalloyed cast steel Published In Advanced Materials Research
2013	Effect of cooling rate on oxidation behaviour of microalloyed steel Published In Applied Mechanics and Materials
2013	Effect of water vapor on oxidation of ferritic stainless steel 21Cr- 0.6Mo-Nb-Ti in simulated reheating environment Published In Advanced Materials Research
2013	Effects of hydrogen on the hot deformation behaviour of Ti-6Al-4V alloy: experimental and constitutive model studies Published In Journal of Alloys and Compounds
2013	Effects of tungsten addition and heat treatment conditions on microstructure and mechanical properties of microalloyed forging steels Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2013	Effects of tungsten addition on the microstructure and mechanical properties of microalloyed forging steels Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2013	Effects of tungsten on continuous cooling transformation characteristics of microalloyed steels Published In Materials and Design
2013	Enhancing impact fracture toughness and tensile properties of a microalloyed cast steel by hot forging and post-forging heat treatment processes Published In Materials and Design
2013	Enhancing mechanical properties of a low-carbon microalloyed cast steel by controlled heat treatment Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2013	Multi-factor coupling system characteristic of the dynamic roll gap in the high-speed rolling mill during the unsteady lubrication process Published In Tribology International
2013	Process design strategies for producing heavy section steel with improved quality Published In Advanced Materials Research
2013	Work hardening behaviors of a low carbon Nb-microalloyed Si-Mn quenching-partitioning steel with different cooling styles after partitioning Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2012	Effect of tungsten addition on the mechanical properties and corrosion resistance of S355NL forging steel Published In Metals and Materials International
2010	Effect of thermo hydrogen treatment on lattice defects and microstructure refinement of Ti6Al4V alloy Published In International Journal of Hydrogen Energy
2010	Influence of hydrogen content on hot deformation behavior and microstructural evolution of Ti600 alloy Published In Journal of Alloys and Compounds
2009	Influence of thermo hydrogen treatment on hot deformation behavior of Ti600 alloy Published In Transactions of Nonferrous Metals Society of China (English Edition)
2008	Influence of hydrogenation on microstructure and hardness of Ti6Al4V alloy Published In Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
2008	Influence of hydrogenation on microstructures and microhardness of Ti6Al4V alloy Published In Transactions of Nonferrous Metals Society of China (English Edition)
2008	Influence of thermohydrogen treatment on microstructural evolution and hardness of Ti600 alloy Published In Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research
2008	Mechanical behaviors of Ti6A14V alloy during low-temperature super plastic deformation Published In Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research
2008	Modeling of dynamic recrystallization of Ti6Al4V alloy using a cellular automaton approach Published In Acta Metallurgica Sinica (English Letters)
2008	Thermodynamic calculation on the formation of titanium hydride Published In Chinese Journal of Chemical Physics

Book

Year	Title
2017	Microforming Technology: Theory, Simulation and Practice Publisher London, United Kingdom
2017	Rolling of advanced high strength steels: Theory, simulation and practice Publisher Boca Raton, USA
2014	Functions of tungsten alloying in microalloyed steels Publisher https://www.novapublishers.com/catalog/product_info.php?products_id=50596

Chapter

Year	Title
2017	Chapter 1 Fundamentals of Microforming Published In Microforming Technology Publisher Elsevier
2017	Chapter 10 Simulation of Micro Deep Drawing Published In Microforming Technology Publisher Elsevier
2017	Chapter 11 Simulation of Micro Hydromechanical Deep Drawing Published In Microforming Technology Publisher Elsevier
2017	Chapter 12 Simulation of Micro Bending Published In Microforming Technology Publisher Elsevier
2017	Chapter 13 Simulation of Micro Compression Published In Microforming Technology Publisher Elsevier
2017	Chapter 14 Practice of Micro Cross Wedge Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 15 Practice of Micro Flexible Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 16 Practice of Micro Ultrathin Strip Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 17 Practice of Micro Deep Drawing Published In Microforming Technology Publisher Elsevier
2017	Chapter 18 Practice of Micro Hydromechanical Deep Drawing Published In Microforming Technology Publisher Elsevier
2017	Chapter 19 Practice of Micro Bending Published In Microforming Technology Publisher Elsevier
2017	Chapter 2 Size Effects in Microforming Published In Microforming Technology Publisher Elsevier
2017	Chapter 20 Practice of Micro Compression Published In Microforming Technology Publisher Elsevier
2017	Chapter 3 Scaling Laws Published In Microforming Technology Publisher Elsevier
2017	Chapter 4 Strain Gradient Plasticity Theory Published In Microforming Technology Publisher Elsevier
2017	Chapter 5 Crystal Plasticity Theory Published In Microforming Technology Publisher Elsevier
2017	Chapter 6 Simulation Models in Microforming Published In Microforming Technology Publisher Elsevier
2017	Chapter 7 Simulation of Micro Cross Wedge Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 8 Simulation of Micro Flexible Rolling Published In Microforming Technology Publisher Elsevier
2017	Chapter 9 Simulation of Micro Ultrathin Strip Rolling Published In Microforming Technology Publisher Elsevier
2017	Preface Published In Microforming Technology Publisher Elsevier
2016	Positive roles of hydrogen in titanium alloys Published In Titanium Alloys: Types, Properties and Research Insights Publisher New York, United States

Conference Paper

Year	Title
2018	Effect of cold rolling reduction on recrystallization behaviors of aa5754 sheets in a short annealing time Published In Materials Science Forum
2018	Investigation on the formability of Al-Cu composite material in micro deep drawing process with different lubrication conditions Published In ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
2018	Investigation on the formability of Al-Cu composite material in micro deep drawing process with different lubrication conditions Published In ISAAT 2018 - 21st International Symposium on Advances in Abrasive Technology
2018	Numerical investigation on the forming behaviour of stainless/carbon steel bimetal composite Published In 2018 The 3rd International Conference on Precision Machinery and Manufacturing Technology (ICPMMT 2018)
2018	Preface Published In IOP Conference Series: Materials Science and Engineering
2017	Numerical modelling of micro deep drawing with aluminium-copper composite considering surface roughness Published In ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology
2017	Tribological behaviour of water-based nanolubricant containing TiO2 nanoparticles on ferritic stainless steel Published In ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology
2011	Hydrogen embrittlement of low carbon HSLA steel during slow strain rate test Published In Advanced Materials Research
2007	Influences of hydrogenation on microstructure and microhardness of Ti6Al4V alloy Published In PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3
2007	Influences of hydrogenation on microstructure and microhardness of Ti6Al4V alloy Published In Materials Science Forum

Investigator On

Year	Title
2019 - 2021	Mechanics of the shape of thin strip with varying thickness Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2016	Fundamental research on applications of roll-bonding clad steel plates in mining equipment Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
2016	Novel forming simulation and performance investigation on automotive frame application of the metastable austenitic high strength stainless steel Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
2015	Micromanufacturing and the mechanics of novel composite micro drills Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	A Study on Static and Dynamic Characteristics of Aerostatic Bearings	Cui, Hailong
Doctor of Philosophy	A Study of Hot-Dip Galvanizing of Hot-Rolled Steel Strip Without Acid-Pickling	Lin, Fei
Master of Research - EIS	Numerical and Experimental Analysis of Stir Welding Process	Morshed, Afshana

Keywords

materials processing, microforming, micromanufacturing, rolling technology, nano lubrication

Located In Facility

Building 8, Room G12

Scopus Id

56433769900

Overview

Overview

Top Publications

Research Areas

Publications

Selected Publications

Journal Article

Book

Chapter

Conference Paper

Funding

Investigator On

Supervision

Advisees

Graduate Advising Relationship

Background

Keywords

Contact

Located In Facility

Identity

Scopus Id

Overview

Top Publications

Research Areas

Publications

Selected Publications

Journal Article

Book

Chapter

Conference Paper

Funding

Investigator On

Supervision

Advisees

Graduate Advising Relationship

Background

Keywords

Contact

Located In Facility

Identity

Scopus Id

Visualisations

Research Areas