Yu, Hai Liang.

Overview

My researches focus on Engineering Manufacture, Engineering Materials, and Engineering Mechanical.

I have published more than 100 papers in referred journals and conferences. Such as: Scientific reports, Metallurgical and Materials Transactions A, Materials Science Engineering A, Journal of Engineering Manufacture, Journal of Materials Processing Technology, International Journal of Advanced Manufacturing Technology, Materials Letters, ISIJ International, Steel Research International, China Science, Journal of Materials Engineering and Performance, Journal of Manufacturing Science and Engineering - ASME, Materials and Manufacturing Processes.

I have published more than 30 comments in newspapers focus on science and technology.

I am the co-Editor-in-Chief of “Modeling and Numerical Simulation of Material Science”, Associate editor of journal "International Research Journal of Engineering Science, Technology and Innovation" , Academic editor of "Scientific Reports (Nature Publishing Group)", "The Scientific World Journal" etc.

I want to be an international leading professor in my research fields in future.

Top Publications

Year	Title
2012	Asymmetric cryorolling for fabrication of nanostructural aluminum sheets Published in Scientific Reports
2015	High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	A deformation mechanism of hard metal surrounded by soft metal during roll forming Published in Scientific Reports
2014	Abnormally high residual dislocation density in pure aluminum after Al/Ti/Al laminate annealing for seven days Published in Philosophical Magazine Letters: structure and properties of condensed matter
2014	An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Crack healing in a low-carbon steel under hot plastic deformation Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Numerical comparison between Berkovich and conical nano-indentations: mechanical behaviour and micro-texture evolution Published in Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2014	Tensile fracture of ultrafine grained aluminum 6061 sheets by asymmetric cryorolling for microforming Published in International Journal of Damage Mechanics

Selected Publications

Journal Article

Year	Title
2019	High thermal stability and excellent mechanical properties of ultrafine-grained high-purity copper sheets subjected to asymmetric cryorolling Published In Materials Characterization
2019	Microstructure and mechanical properties of large-volume gradient-structure aluminium sheets fabricated by cyclic skin-pass rolling Published In Philosophical Magazine
2019	Texture Modeling of Accumulative Roll-BondingProcessed Aluminum Single Crystal {1 2 3}<634>by Crystal Plasticity FE Published In Advanced Engineering Materials
2019	Texture Stability and Transition in an Accumulative Roll-Bonding-Processed Aluminum Single Crystal Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018	A new finite element model for multi-cycle accumulative roll-bonding process and experiment verification Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Improvement in Strength and Ductility of Asymmetric-Cryorolled Copper Sheets Under Low-Temperature Annealing Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018	Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling Published In Philosophical Magazine
2017	Effect of lanthanum in arc erosion of Titanium-Zirconium-Molybdenum alloy Published In Journal of Alloys and Compounds
2017	Electrochemical Corrosion Behavior of Titanium-Zirconium- Molybdenum Alloy Published In Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
2017	Electrochemical corrosion behavior of platinum-coated lanthanum doped titanium-zirconium-molybdenum alloy Published In Journal of Alloys and Compounds
2017	Enhanced materials performance of Al/Ti/Al laminate sheets subjected to cryogenic roll bonding Published In Journal of Materials Research
2017	Influence of concentrations of chloride ions on electrochemical corrosion behavior of titanium-zirconium-molybdenum alloy Published In Journal of Alloys and Compounds
2017	Investigation on compression behavior of TZM and La2O3 doped TZM Alloys at high temperature Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Arc erosion behavior of La-doping titanium-zirconium-molybdenum alloy Published In Journal of Alloys and Compounds
2016	Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Improvement of AA5052 sheet properties by electromagnetic twin-roll casting Published In International Journal of Advanced Manufacturing Technology
2016	Investigation on bonding strength of steel/aluminum clad sheet processed by horizontal twin-roll casting, annealing and cold rolling Published In Materials and Design
2016	Microstructure evolution of accumulative roll bonding processed pure aluminum during cryorolling Published In Journal of Materials Research
2016	Simultaneous grain growth and grain refinement in bulk ultrafine-grained copper under tensile deformation at room temperature Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: a review Published In Advanced Engineering Materials
2016	Strengthening and elongation mechanism of Lanthanum-doped Titanium-Zirconium-Molybdenum alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Superstrength of nanograined steel with nanoscale intermetallic precipitates transformed from shock-compressed martensitic steel Published In Scientific Reports
2015	A new insight into ductile fracture of ultrafine-grained Al-Mg alloys Published In Scientific Reports
2015	High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2015	Nanomechanical properties of TiCN and TiCN/Ti coatings on Ti prepared by Filtered Arc Deposition Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2015	Optimization of process parameters in twin-roll strip casting of an AZ61 alloy by experiments and simulations Published In International Journal of Advanced Manufacturing Technology
2014	A deformation mechanism of hard metal surrounded by soft metal during roll forming Published In Scientific Reports
2014	Abnormally high residual dislocation density in pure aluminum after Al/Ti/Al laminate annealing for seven days Published In Philosophical Magazine Letters: structure and properties of condensed matter
2014	Advanced rolling technologies for producing ultra-finegrain/nanostructured alloys Published In Procedia Engineering
2014	An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Analysis of internal crack healing mechanism under rolling deformation Published In PLoS One
2014	Cellular automaton simulation of hot deformation of TRIP steel Published In Computational Materials Science
2014	Crack healing in a low-carbon steel under hot plastic deformation Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Deformation behavior and wear resistance of hard TiCN and TiCN/Ti coatings on Ti6Al4V alloy Published In Advanced Materials Research
2014	Editorial Published In Computational Materials Science
2014	Experimental and theoretical study on minimum achievable foil thickness during asymmetric rolling Published In PLoS One
2014	Fabrication of nanostructured aluminum sheets using four-layer accumulative roll bonding Published In Materials and Manufacturing Processes
2014	Grain refinement in the formability of aluminium thin cup Published In Materials Science Forum
2014	Investigation of closure of internal cracks during rolling by FE model considering crack surface roughness Published In International Journal of Advanced Manufacturing Technology
2014	Numerical comparison between Berkovich and conical nano-indentations: mechanical behaviour and micro-texture evolution Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2014	Optimization and application of process parameters in an AZ61 alloy twin-roll strip casting Published In Materials Science Forum
2014	Tensile fracture of ultrafine grained aluminum 6061 sheets by asymmetric cryorolling for microforming Published In International Journal of Damage Mechanics
2014	The mechanical behaviour of TiN and multi-layered coating of TiN/Ti on Ti6Al4V substrate during nano-indentation Published In International Journal of Surface Science and Engineering
2013	Experiment method to simulate internal cracks and its healing behavior of rolled pieces Published In Dongbei Daxue Xuebao/Journal of Northeastern University
2013	Fabrication of ultra-thin nanostructured bimetallic foils by Accumulative Roll Bonding and Asymmetric Rolling Published In Scientific Reports
2013	Investigation of sample size effect on the deformation heterogeneity and texture development during equal channel angular pressing Published In Computational Materials Science
2013	Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2013	Occurrence of surface defects on strips during hot rolling process by FEM Published In International Journal of Advanced Manufacturing Technology
2013	Surface temperature difference for analysis of distortion of heavy weak-rigidity castings during heat treatment Published In Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture
2013	The wave motion of the rolling force during variable gauge rolling Published In Steel Research International
2012	A numerical model for simulation of crack initiation around inclusion under tensile load Published In Journal of Computational and Theoretical Nanoscience
2012	Asymmetric cryorolling for fabrication of nanostructural aluminum sheets Published In Scientific Reports
2012	Distortion behavior of a heavy hydro turbine blade casting during forced air cooling in normalizing treatment process Published In Journal of Materials Engineering and Performance
2012	Investigation on temperature change of cold magnesium alloy strips rolling process with heated roll Published In Journal of Materials Engineering and Performance
2012	Simulation and control of distortion of hydro turbine blade steel casting in heat treatment process Published In Materials Science Forum
2011	A real-time measuring technology for studying distortion of hydraulic turbine blade castings during heat treatment process Published In China foundry
2011	Continuous simulation of slab deformation during multi-pass rolling Published In Shandong Metallurgy
2011	Distortion behavior of hydro turbine blade castings during heat treatment processes under variation of seasonal temperature Published In Science China Technological Sciences
2011	Dynamic measurement of temperature field and deformation in hydraulic turbine blade at cooling stage of heat treatment Published In Chinese Journal of Mechanical Engineering
2011	Effect of the volume fraction and grain size of polygonal ferrite on the fracture properties of drop weight tear test of pipeline steel Published In Chinese Journal of Mechanical Engineering
2011	Evolution of microstructures and inclusions of 82B wire rod during drawing process Published In China Mechanical Engineering
2011	FEM simulation of multipass shape rolling processes Published In Advanced Materials Research
2011	Integrated simulation of castings deformation during casting and heat treatment processes Published In Advanced Materials Research
2011	Research on crack healing in slab during hot rolling Published In Advanced Materials Research
2011	Simulation of microstructure and properties evolution of micro alloyed steel during hot deformation by cellular automaton Published In Jinshu Xuebao
2011	Three dimensional dynamical measurement of distortion of heavy steel castings during heat treatment process Published In Jinshu Xuebao
2010	Analysis of vibration of crystallizer on stress distribution of slab during continuous casting using FEM Published In Journal of Iron and Steel Research International
2010	Efficient and economical manufacture of heavy steel castings Published In Frontiers of Materials Science in China
2010	Longitudinal crack on slab surface at straightening stage during continuous casting using finite element method Published In Central South University of Technology
2010	Optimization of the cooling process of a heavy hydraulic turbine runner band casting in heat treatment Published In Materials Science Forum
2010	Review on factors of surface cracks in slab and their behavior during rolling Published In Forging & Stamping Technology
2010	Rolling technology with reducing resources in China Published In Materials and Manufacturing Processes
2009	Analysis and controlling methods on transverse cracks of plate Nb containing steel slab Published In Continuous Casting
2009	Analysis of crack healing in hot rolled deformed piece Published In Journal of Iron and Steel Research International
2009	Behavior of inclusions with weak adhesion to strip matrix during rolling using FEM Published In Journal of Materials Processing Technology
2009	Deformation behavior of inclusions in stainless steel strips during multi-pass cold rolling Published In Journal of Materials Processing Technology
2009	Evolution of surface crack on slab during rough rolling using thermal-mechanical FEM Published In Journal of Iron and Steel Research International
2009	Friction and slab deformation behaviour during rough rolling Published In International Journal of Surface Science and Engineering
2009	Influence of edge rolling reduction on plate-edge stress distribution during finish rolling Published In Journal of Iron and Steel Research International
2009	Numerical analysis of transversal crack on slab corner in straightening during continuous casting Published In Journal of Iron and Steel Research International
2009	Research on the behavior of transversal crack in slab V-H rolling process by FEM Published In Journal of Materials Processing Technology
2009	Thermal-mechanical finite element analysis of evolution of surface cracks during slab rolling Published In Materials and Manufacturing Processes
2008	Analysis of crack tip stress of transversal crack on slab corner during vertical-horizontal rolling process by FEM Published In Journal of Iron and Steel Research International
2008	Analysis of roll gap pressure in sendzimir mill by FEM Published In Journal of Iron and Steel Research International
2008	Behaviour of longitudinal cracks on slab surfaces in V-H rolling processes Published In Steel Research International
2008	FE analysis of inclusion deformation and crack generation during cold rolling with a transition layer Published In Materials Letters
2008	Numerical analysis of roll deflection for Sendzimir mill Published In Journal of Manufacturing Science and Engineering
2008	Numerical analysis of strip edge drop for Sendzimir mill Published In Journal of Materials Processing Technology
2008	Research on behavior of inclusions in a stainless steel strip during rolling by FEM Published In Steel Research International
2008	Research on behavior of slab surface defects in forward slip zone during V-H rolling process Published In Materials Science Forum
2008	Strain distribution of strips with spherical inclusion during cold rolling Published In Nonferrous Metals Society of China Transactions
2008	Temperature rise on flat surface after rapid cooling Published In Journal of Iron and Steel Research International
2007	Analysis of rolls deflection of Sendzimir mill by 3D FEM Published In Nonferrous Metals Society of China Transactions
2007	Contact element method with two relative coordinates and its application to prediction of strip profile of a sendzimir mill Published In ISIJ Internationa
2007	Coupling analysis of multipass VH rolling process by FEM Published In Hot Working Technology
2007	FEM analysis of influence of vertical roll shape on head and tail shape of rolled piece during multipass V-H rolling process Published In Journal of Iron and Steel Research International
2007	Influence of dog-bone apex on shape during slab horizontal rolling process Published In Journal of Iron and Steel Research International
2007	Numerical simulation of temperature field and thermal stress field of work roll during hot strip rolling Published In Journal of Iron and Steel Research International

Chapter

Year	Title
2010	FE analysis of evolution of defects during rolling Published In Finite Element Analysis

Conference Paper

Year	Title
2013	Recent developments in flat rolling technologies Published In PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing
2013	Simulation of defects in micro-deep drawing of an aluminium alloy foil Published In The 11th International Conference on Numerical Methods in Industrial Forming Processes
2013	Transition of ductile and brittle fracture during DWTT by FEM Published In 13th International Conference on Fracture (ICF)
2012	Crystal plasticity finite element analysis of influence of initial crystal orientation on texture evolution and deformation heterogeneity of cold-rolled aluminium Published In Proceedings of the 14th International Conference of Metal Forming
2012	Mechanical behaviours of TiN and TiN/Ti multilayer coating on Ti6Al4V substrate during nanoindentation Published In 15th International Conference on Advances in Materials & Processing Technologies
2012	Simulation of hot deformation of TRIP steel by cellular automaton Published In 15th International Conference on Advances in Materials & Processing Technologies
2012	Tracing of macrosegregation ring in slab during bar rough rolling using FEM Published In 14th International Conference of Metal Forming
2012	Wave motion of rolling force in variable gauge rolling process Published In 15th International Conference on Advances in Materials & Processing Technologies
2011	Evaluation of the distortion of a hydro turbine blade during heat treatment process Published In TMS Annual Meeting
2009	Analysis of multipass plate rolling processes using thermomechanical FEM Published In International Conference Processing & Manufacturing of Advanced Materials
2009	Evolution of subsurface blisters and initiation of surface crack on slab during hot rolling using FEM Published In 2nd International Conference on Modelling and Simulation
2008	A formula for prediction of void and crack closure in workpiece under large deformation Published In 5th Symposium on Advanced Structural Steels and New Rolling Technologies
2008	FE analysis of behavior of internal-longitudinal cracks in a slab during vertical-horizontal rolling Published In Asia-Pacific Conference on Materials Processing
2008	FE analysis of temperature field of PQF mandrel Published In 5th Symposium on Advanced Structural Steels and New Rolling Technologies
2008	Numerical analysis of movement of inclusions in a stainless steel strip during cold rolling Published In 1st International Conference of Modelling and Simulation

Investigator On

Year	Title
2017	Large-volume gradient materials: manufacturing and deformation mechanism Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2013	A Physical-based abrasive wear model for high-speed steel at high temperature Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects

Top Publications

Year	Title
2012	Asymmetric cryorolling for fabrication of nanostructural aluminum sheets Published in Scientific Reports
2015	High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	A deformation mechanism of hard metal surrounded by soft metal during roll forming Published in Scientific Reports
2014	Abnormally high residual dislocation density in pure aluminum after Al/Ti/Al laminate annealing for seven days Published in Philosophical Magazine Letters: structure and properties of condensed matter
2014	An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Crack healing in a low-carbon steel under hot plastic deformation Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Numerical comparison between Berkovich and conical nano-indentations: mechanical behaviour and micro-texture evolution Published in Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2014	Tensile fracture of ultrafine grained aluminum 6061 sheets by asymmetric cryorolling for microforming Published in International Journal of Damage Mechanics

Selected Publications

Journal Article

Year	Title
2019	High thermal stability and excellent mechanical properties of ultrafine-grained high-purity copper sheets subjected to asymmetric cryorolling Published In Materials Characterization
2019	Microstructure and mechanical properties of large-volume gradient-structure aluminium sheets fabricated by cyclic skin-pass rolling Published In Philosophical Magazine
2019	Texture Modeling of Accumulative Roll-BondingProcessed Aluminum Single Crystal {1 2 3}<634>by Crystal Plasticity FE Published In Advanced Engineering Materials
2019	Texture Stability and Transition in an Accumulative Roll-Bonding-Processed Aluminum Single Crystal Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018	A new finite element model for multi-cycle accumulative roll-bonding process and experiment verification Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Improvement in Strength and Ductility of Asymmetric-Cryorolled Copper Sheets Under Low-Temperature Annealing Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018	Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling Published In Philosophical Magazine
2017	Effect of lanthanum in arc erosion of Titanium-Zirconium-Molybdenum alloy Published In Journal of Alloys and Compounds
2017	Electrochemical Corrosion Behavior of Titanium-Zirconium- Molybdenum Alloy Published In Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering
2017	Electrochemical corrosion behavior of platinum-coated lanthanum doped titanium-zirconium-molybdenum alloy Published In Journal of Alloys and Compounds
2017	Enhanced materials performance of Al/Ti/Al laminate sheets subjected to cryogenic roll bonding Published In Journal of Materials Research
2017	Influence of concentrations of chloride ions on electrochemical corrosion behavior of titanium-zirconium-molybdenum alloy Published In Journal of Alloys and Compounds
2017	Investigation on compression behavior of TZM and La2O3 doped TZM Alloys at high temperature Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Arc erosion behavior of La-doping titanium-zirconium-molybdenum alloy Published In Journal of Alloys and Compounds
2016	Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Improvement of AA5052 sheet properties by electromagnetic twin-roll casting Published In International Journal of Advanced Manufacturing Technology
2016	Investigation on bonding strength of steel/aluminum clad sheet processed by horizontal twin-roll casting, annealing and cold rolling Published In Materials and Design
2016	Microstructure evolution of accumulative roll bonding processed pure aluminum during cryorolling Published In Journal of Materials Research
2016	Simultaneous grain growth and grain refinement in bulk ultrafine-grained copper under tensile deformation at room temperature Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: a review Published In Advanced Engineering Materials
2016	Strengthening and elongation mechanism of Lanthanum-doped Titanium-Zirconium-Molybdenum alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Superstrength of nanograined steel with nanoscale intermetallic precipitates transformed from shock-compressed martensitic steel Published In Scientific Reports
2015	A new insight into ductile fracture of ultrafine-grained Al-Mg alloys Published In Scientific Reports
2015	High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2015	Nanomechanical properties of TiCN and TiCN/Ti coatings on Ti prepared by Filtered Arc Deposition Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2015	Optimization of process parameters in twin-roll strip casting of an AZ61 alloy by experiments and simulations Published In International Journal of Advanced Manufacturing Technology
2014	A deformation mechanism of hard metal surrounded by soft metal during roll forming Published In Scientific Reports
2014	Abnormally high residual dislocation density in pure aluminum after Al/Ti/Al laminate annealing for seven days Published In Philosophical Magazine Letters: structure and properties of condensed matter
2014	Advanced rolling technologies for producing ultra-finegrain/nanostructured alloys Published In Procedia Engineering
2014	An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Analysis of internal crack healing mechanism under rolling deformation Published In PLoS One
2014	Cellular automaton simulation of hot deformation of TRIP steel Published In Computational Materials Science
2014	Crack healing in a low-carbon steel under hot plastic deformation Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Deformation behavior and wear resistance of hard TiCN and TiCN/Ti coatings on Ti6Al4V alloy Published In Advanced Materials Research
2014	Editorial Published In Computational Materials Science
2014	Experimental and theoretical study on minimum achievable foil thickness during asymmetric rolling Published In PLoS One
2014	Fabrication of nanostructured aluminum sheets using four-layer accumulative roll bonding Published In Materials and Manufacturing Processes
2014	Grain refinement in the formability of aluminium thin cup Published In Materials Science Forum
2014	Investigation of closure of internal cracks during rolling by FE model considering crack surface roughness Published In International Journal of Advanced Manufacturing Technology
2014	Numerical comparison between Berkovich and conical nano-indentations: mechanical behaviour and micro-texture evolution Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2014	Optimization and application of process parameters in an AZ61 alloy twin-roll strip casting Published In Materials Science Forum
2014	Tensile fracture of ultrafine grained aluminum 6061 sheets by asymmetric cryorolling for microforming Published In International Journal of Damage Mechanics
2014	The mechanical behaviour of TiN and multi-layered coating of TiN/Ti on Ti6Al4V substrate during nano-indentation Published In International Journal of Surface Science and Engineering
2013	Experiment method to simulate internal cracks and its healing behavior of rolled pieces Published In Dongbei Daxue Xuebao/Journal of Northeastern University
2013	Fabrication of ultra-thin nanostructured bimetallic foils by Accumulative Roll Bonding and Asymmetric Rolling Published In Scientific Reports
2013	Investigation of sample size effect on the deformation heterogeneity and texture development during equal channel angular pressing Published In Computational Materials Science
2013	Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2013	Occurrence of surface defects on strips during hot rolling process by FEM Published In International Journal of Advanced Manufacturing Technology
2013	Surface temperature difference for analysis of distortion of heavy weak-rigidity castings during heat treatment Published In Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture
2013	The wave motion of the rolling force during variable gauge rolling Published In Steel Research International
2012	A numerical model for simulation of crack initiation around inclusion under tensile load Published In Journal of Computational and Theoretical Nanoscience
2012	Asymmetric cryorolling for fabrication of nanostructural aluminum sheets Published In Scientific Reports
2012	Distortion behavior of a heavy hydro turbine blade casting during forced air cooling in normalizing treatment process Published In Journal of Materials Engineering and Performance
2012	Investigation on temperature change of cold magnesium alloy strips rolling process with heated roll Published In Journal of Materials Engineering and Performance
2012	Simulation and control of distortion of hydro turbine blade steel casting in heat treatment process Published In Materials Science Forum
2011	A real-time measuring technology for studying distortion of hydraulic turbine blade castings during heat treatment process Published In China foundry
2011	Continuous simulation of slab deformation during multi-pass rolling Published In Shandong Metallurgy
2011	Distortion behavior of hydro turbine blade castings during heat treatment processes under variation of seasonal temperature Published In Science China Technological Sciences
2011	Dynamic measurement of temperature field and deformation in hydraulic turbine blade at cooling stage of heat treatment Published In Chinese Journal of Mechanical Engineering
2011	Effect of the volume fraction and grain size of polygonal ferrite on the fracture properties of drop weight tear test of pipeline steel Published In Chinese Journal of Mechanical Engineering
2011	Evolution of microstructures and inclusions of 82B wire rod during drawing process Published In China Mechanical Engineering
2011	FEM simulation of multipass shape rolling processes Published In Advanced Materials Research
2011	Integrated simulation of castings deformation during casting and heat treatment processes Published In Advanced Materials Research
2011	Research on crack healing in slab during hot rolling Published In Advanced Materials Research
2011	Simulation of microstructure and properties evolution of micro alloyed steel during hot deformation by cellular automaton Published In Jinshu Xuebao
2011	Three dimensional dynamical measurement of distortion of heavy steel castings during heat treatment process Published In Jinshu Xuebao
2010	Analysis of vibration of crystallizer on stress distribution of slab during continuous casting using FEM Published In Journal of Iron and Steel Research International
2010	Efficient and economical manufacture of heavy steel castings Published In Frontiers of Materials Science in China
2010	Longitudinal crack on slab surface at straightening stage during continuous casting using finite element method Published In Central South University of Technology
2010	Optimization of the cooling process of a heavy hydraulic turbine runner band casting in heat treatment Published In Materials Science Forum
2010	Review on factors of surface cracks in slab and their behavior during rolling Published In Forging & Stamping Technology
2010	Rolling technology with reducing resources in China Published In Materials and Manufacturing Processes
2009	Analysis and controlling methods on transverse cracks of plate Nb containing steel slab Published In Continuous Casting
2009	Analysis of crack healing in hot rolled deformed piece Published In Journal of Iron and Steel Research International
2009	Behavior of inclusions with weak adhesion to strip matrix during rolling using FEM Published In Journal of Materials Processing Technology
2009	Deformation behavior of inclusions in stainless steel strips during multi-pass cold rolling Published In Journal of Materials Processing Technology
2009	Evolution of surface crack on slab during rough rolling using thermal-mechanical FEM Published In Journal of Iron and Steel Research International
2009	Friction and slab deformation behaviour during rough rolling Published In International Journal of Surface Science and Engineering
2009	Influence of edge rolling reduction on plate-edge stress distribution during finish rolling Published In Journal of Iron and Steel Research International
2009	Numerical analysis of transversal crack on slab corner in straightening during continuous casting Published In Journal of Iron and Steel Research International
2009	Research on the behavior of transversal crack in slab V-H rolling process by FEM Published In Journal of Materials Processing Technology
2009	Thermal-mechanical finite element analysis of evolution of surface cracks during slab rolling Published In Materials and Manufacturing Processes
2008	Analysis of crack tip stress of transversal crack on slab corner during vertical-horizontal rolling process by FEM Published In Journal of Iron and Steel Research International
2008	Analysis of roll gap pressure in sendzimir mill by FEM Published In Journal of Iron and Steel Research International
2008	Behaviour of longitudinal cracks on slab surfaces in V-H rolling processes Published In Steel Research International
2008	FE analysis of inclusion deformation and crack generation during cold rolling with a transition layer Published In Materials Letters
2008	Numerical analysis of roll deflection for Sendzimir mill Published In Journal of Manufacturing Science and Engineering
2008	Numerical analysis of strip edge drop for Sendzimir mill Published In Journal of Materials Processing Technology
2008	Research on behavior of inclusions in a stainless steel strip during rolling by FEM Published In Steel Research International
2008	Research on behavior of slab surface defects in forward slip zone during V-H rolling process Published In Materials Science Forum
2008	Strain distribution of strips with spherical inclusion during cold rolling Published In Nonferrous Metals Society of China Transactions
2008	Temperature rise on flat surface after rapid cooling Published In Journal of Iron and Steel Research International
2007	Analysis of rolls deflection of Sendzimir mill by 3D FEM Published In Nonferrous Metals Society of China Transactions
2007	Contact element method with two relative coordinates and its application to prediction of strip profile of a sendzimir mill Published In ISIJ Internationa
2007	Coupling analysis of multipass VH rolling process by FEM Published In Hot Working Technology
2007	FEM analysis of influence of vertical roll shape on head and tail shape of rolled piece during multipass V-H rolling process Published In Journal of Iron and Steel Research International
2007	Influence of dog-bone apex on shape during slab horizontal rolling process Published In Journal of Iron and Steel Research International
2007	Numerical simulation of temperature field and thermal stress field of work roll during hot strip rolling Published In Journal of Iron and Steel Research International

Chapter

Year	Title
2010	FE analysis of evolution of defects during rolling Published In Finite Element Analysis

Conference Paper

Year	Title
2013	Recent developments in flat rolling technologies Published In PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing
2013	Simulation of defects in micro-deep drawing of an aluminium alloy foil Published In The 11th International Conference on Numerical Methods in Industrial Forming Processes
2013	Transition of ductile and brittle fracture during DWTT by FEM Published In 13th International Conference on Fracture (ICF)
2012	Crystal plasticity finite element analysis of influence of initial crystal orientation on texture evolution and deformation heterogeneity of cold-rolled aluminium Published In Proceedings of the 14th International Conference of Metal Forming
2012	Mechanical behaviours of TiN and TiN/Ti multilayer coating on Ti6Al4V substrate during nanoindentation Published In 15th International Conference on Advances in Materials & Processing Technologies
2012	Simulation of hot deformation of TRIP steel by cellular automaton Published In 15th International Conference on Advances in Materials & Processing Technologies
2012	Tracing of macrosegregation ring in slab during bar rough rolling using FEM Published In 14th International Conference of Metal Forming
2012	Wave motion of rolling force in variable gauge rolling process Published In 15th International Conference on Advances in Materials & Processing Technologies
2011	Evaluation of the distortion of a hydro turbine blade during heat treatment process Published In TMS Annual Meeting
2009	Analysis of multipass plate rolling processes using thermomechanical FEM Published In International Conference Processing & Manufacturing of Advanced Materials
2009	Evolution of subsurface blisters and initiation of surface crack on slab during hot rolling using FEM Published In 2nd International Conference on Modelling and Simulation
2008	A formula for prediction of void and crack closure in workpiece under large deformation Published In 5th Symposium on Advanced Structural Steels and New Rolling Technologies
2008	FE analysis of behavior of internal-longitudinal cracks in a slab during vertical-horizontal rolling Published In Asia-Pacific Conference on Materials Processing
2008	FE analysis of temperature field of PQF mandrel Published In 5th Symposium on Advanced Structural Steels and New Rolling Technologies
2008	Numerical analysis of movement of inclusions in a stainless steel strip during cold rolling Published In 1st International Conference of Modelling and Simulation

Investigator On

Year	Title
2017	Large-volume gradient materials: manufacturing and deformation mechanism Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2013	A Physical-based abrasive wear model for high-speed steel at high temperature Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects

Located In Facility

Building 8, Room G17

Orcid Id

http://orcid.org/0000-0001-7959-0717 (pending confirmation)

Scopus Id

56112925200

Yu, Hai Liang. Professor

Research Fellow

Overview

Overview

Top Publications

Publications

Selected Publications

Journal Article

Chapter

Conference Paper

Funding

Investigator On

Contact

Located In Facility

Identity

Orcid Id

Scopus Id

Overview

Top Publications

Publications

Selected Publications

Journal Article

Chapter

Conference Paper

Funding

Investigator On

Contact

Located In Facility

Identity

Orcid Id

Scopus Id

Visualisations