Pereloma, Elena V.

Overview

Prof. Pereloma has conducted extensive research in physical metallurgy of metals and alloys using electron microscopy and atom probe tomography as her main research tools. She is an expert in the microstructure characterisation of various materials including metals and ceramics and has gained a reputation as one of the best specialists worldwide in the characterisation of complex multiphase steels and alloys.

Top Publications

Year	Title
2007	Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels Published in Acta Materialia
2015	The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy Published in Acta Materialia
2012	Understanding the behavior of advanced high-strength steels using atom probe tomography Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2008	Effect of pre-straining and bake hardening on the microstructure of thermomechanically processed CMnSi TRIP steels with and without Nb and Mo additions Published in Scripta Materialia
2009	Observation of Precipitation Evolution in Fe-Ni-Mn-Ti-Al Maraging Steel by Atom Probe Tomography Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2007	Grain size, misorientation, and texture evolution of copper processed by equal channel angular extrusion and the validity of the Hall-Petch relationship Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy Published in Acta Materialia

Research Areas

Available as Research Supervisor

Selected Publications

Journal Article

Year	Title
2020	An in situ synchrotron study of the localized B2↔B19' phase transformation in an Ni-Ti alloy subjected to uniaxial cyclic loading-unloading with incremental strains Published In Journal of Applied Crystallography Volume 53 Pages 335 - 348 Altmetric
2020	Martensitic wear resistant steels alloyed with titanium Published In Wear Volume 446-447 Altmetric
2020	On the Degradation of Retained Austenite in Transformation Induced Plasticity Steel Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Altmetric
2020	The effect of continuous heating on microstructure development in thermo-mechanically processed Ti-10V-3Fe-3Al alloy produced by powder metallurgy Published In Materials Characterization Volume 161 Altmetric
2020	Uncovering the mechanism of dislocation interaction with nanoscale (<4 nm) interphase precipitates in microalloyed ferritic steels Published In Materials Research Letters Volume 8 Pages 341 - 347 Altmetric
2019	A comparative study of a NiTi alloy subjected to uniaxial monotonic and cyclic loading-unloading in tension using digital image correlation: The grain size effect Published In Journal of Alloys and Compounds Volume 777 Pages 723 - 735 ISSN 0925-8388 Altmetric
2019	An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 743 Pages 327 - 338 ISSN 0921-5093 Altmetric
2019	Experimental and Self-Consistent Modeling Study of De-twinning in a Twinning-Induced Plasticity Steel Published In Journal of Metals Volume 71 Pages 1396 - 1403 ISSN 1047-4838 Altmetric
2019	Microstructure Evolution during the Production of Dual Phase and Transformation Induced Plasticity Steels Using Modified Strip Casting Simulated in the Laboratory Published In Metals Volume 9 Pages 449-1 - 449-14 Altmetric
2019	On Tetragonality of the Martensite Crystal Lattice in Steels Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 50 Pages 97 - 103 ISSN 1073-5623 Altmetric
2019	Phase-specific properties in a low-alloyed TRIP steel investigated using correlative nanoindentation measurements and electron microscopy Published In Journal of Materials Science Volume Online First Pages 1 - 10 ISSN 0022-2461 Altmetric
2019	The effect of β-phase condition on the tensile behaviour in a near-β Ti alloy produced by blended elemental powder metallurgy Published In Journal of Materials Science and Engineering A Volume 747 Pages 232 - 243 ISSN 1934-8967 Altmetric
2018	A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 726 Pages 102 - 112 ISSN 0921-5093 Altmetric
2018	Comparative effect of Mo and Cr on microstructure and mechanical properties in NbV-microalloyed bainitic steels Published In Metals Volume 8 Pages 134-1 - 134-19 Altmetric
2018	Effect of Uniaxial Tension on the Microstructure and Texture of High Mn Steel Published In Advanced Engineering Materials Volume 20 Pages 1800258-1 - 1800258-12 ISSN 1438-1656 Altmetric
2018	Effect of isochronal annealing on the microstructure, texture and mechanical properties of a cold-rolled high manganese steel Published In Materials Characterization Volume 144 Pages 66 - 76 ISSN 1044-5803 Altmetric
2018	Effect of mo, nb and v on hot deformation behaviour, microstructure and hardness of microalloyed steels Published In Materials Science Forum Volume 941 Pages 3 - 8 ISSN 0255-5476 Altmetric
2018	Formation of deformation-induced products in a metastable-B titanium alloy during high temperature compression Published In Metals Volume 8 Pages 100-1 - 100-10 Altmetric
2018	Nucleation, coarsening and deformation accommodation mechanisms of ε-martensite in a high manganese steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 731 Pages 506 - 519 ISSN 0921-5093 Altmetric
2018	On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy Published In Journal of Alloys and Compounds Volume 748 Pages 620 - 636 ISSN 0925-8388 Altmetric
2018	On the first direct observation of de-twinning in a twinning-induced plasticity steel Published In Acta Materialia Volume 156 Pages 172 - 182 ISSN 1359-6454 Altmetric
2018	Tetragonality of bcc Phases in a Transformation-Induced Plasticity Steel Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 49 Pages 5925 - 5929 ISSN 1073-5623 Altmetric
2017	Constitutive Relations Analyses of Plastic Flow in Dual-Phase Steels to Elucidate Structure–Strength–Ductility Correlations Published In Journal of Metals Volume 69 Pages 1228 - 1235 ISSN 1047-4838 Altmetric
2017	Effect of Mo on dynamic recrystallization and microstructure development of microalloyed steels Published In Metals and Materials International Volume 23 Pages 778 - 787 ISSN 1225-9438 Altmetric
2017	Evidencing extrinsic stacking faults in twinning-induced plasticity steel Published In Materials Characterization Volume 123 Pages 275 - 281 ISSN 1044-5803 Altmetric
2017	Observation of deformation twinning and martensitic transformation during nanoindentation of a transformation-induced plasticity steel Published In Scientific Reports Volume 7 Pages 17397-1 - 17397-6 ISSN 2045-2322 Altmetric
2017	Particle stimulated nucleation during dynamic and metadynamic recrystallisation of Ni-30%Fe-Nb-C alloy Published In Materials Characterization Volume 125 Pages 94 - 98 ISSN 1044-5803 Altmetric
2017	Site-specific atomic-scale characterisation of retained austenite in a strip cast TRIP steel Published In Acta Materialia Volume 134 Pages 1 - 15 ISSN 1359-6454 Altmetric
2017	Strain-induced ferrite formation and its effect on mechanical properties of a dual phase steel produced using laboratory simulated strip casting Published In Journal of Alloys and Compounds Volume 721 Pages 291 - 306 ISSN 0925-8388 Altmetric
2017	Stress-Induced Twinning and Phase Transformations during the Compression of a Ti-10V-3Fe-3Al Alloy Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 48A Pages 2791 - 2800 ISSN 1073-5623 Altmetric
2017	The effect of Nb solute and NbC precipitates on dynamic and metadynamic recrystallisation in Ni-30Fe-Nb-C model alloys Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 700 Pages 116 - 131 ISSN 0921-5093 Altmetric
2017	The effect of thermo-mechanical processing and ageing time on microstructure and mechanical properties of powder metallurgy near β titanium alloys Published In Journal of Alloys and Compounds Volume 714 Pages 610 - 618 ISSN 0925-8388 Altmetric
2017	Vanadium Microalloyed 0.25 C Cast Steels Showing As‐Forged Levels of Strength and Ductility Published In Steel Research International Volume 88 Pages 1600166-1 - 1600166-11 ISSN 1869-344X Altmetric
2016	A transmission Kikuchi diffraction study of cementite in a quenched and tempered steel Published In Materials Characterization Volume 114 Pages 146 - 150 ISSN 1044-5803 Altmetric
2016	Critical assessment 20: On carbon excess in bainitic ferrite Published In Materials Science and Technology Volume 32 Pages 99 - 103 ISSN 0267-0836 Altmetric
2016	Effect of deformation on microstructure and mechanical properties of dual phase steel produced via strip casting simulation Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 651 Pages 291 - 305 ISSN 0921-5093 Altmetric
2016	Effect of gaseous hydrogen charging on the tensile properties of standard and medium Mn X70 pipeline steels Published In Materials Science and Technology Volume 32 Pages 675 - 683 ISSN 1316-2012 Altmetric
2016	In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 662 Pages 185 - 197 ISSN 0921-5093 Altmetric
2016	Investigation of the effect of electrolytic hydrogen charging of X70 steel: I. The effect of microstructure on hydrogen-induced cold cracking and blistering Published In International Journal of Hydrogen Energy Volume 41 Pages 12411 - 12423 ISSN 0360-3199 Altmetric
2016	Investigation of the effect of electrolytic hydrogen charging of X70 steel: II. Microstructural and crystallographic analyses of the formation of hydrogen induced cracks and blisters Published In International Journal of Hydrogen Energy Volume 41 Pages 12424 - 12435 ISSN 0360-3199 Altmetric
2016	Microstructure and mechanical properties of strip cast TRIP steel subjected to thermo-mechanical simulation Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 677 Pages 356 - 366 ISSN 0921-5093 Altmetric
2016	Microstructure and micro-texture evolution during the dynamic recrystallisation of a Ni-30Fe-Nb-C model alloy Published In Journal of Alloys and Compounds Volume 689 Pages 250 - 265 ISSN 0925-8388 Altmetric
2016	Microstructures and mechanical properties of TRIP steel produced by strip casting simulated in the laboratory Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 664 Pages 26 - 42 ISSN 0921-5093 Altmetric
2016	On the feasibility of partial slip reversal and de-twinning during the cyclic loading of TWIP steel Published In Materials Letters Volume 182 Pages 294 - 297 ISSN 0167-577X Altmetric
2016	Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy Published In Acta Materialia Volume 104 Pages 190 - 200 ISSN 1359-6454 Altmetric
2015	A transmission kikuchi diffraction study of a cold-rolled and annealed Fe-17Mn-2Si-3Al-1Ni-0.06C wt% Steel Published In Steel Research International Volume 86 Pages 1204 - 1214 ISSN 1869-344X Altmetric
2015	An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading Published In Applied Physics Letters Volume 106 Pages 171911-1 - 171911-6 ISSN 0003-6951 Altmetric
2015	Application of transmission Kikuchi diffraction to a multi-phase TRIP-TWIP steel Published In Materials Today : proceedings Volume S2 Pages S647 - S650 Altmetric
2015	Hot deformation behaviour of Ni-30Fe-C and Ni-30Fe-Nb-C model alloys Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 641 Pages 160 - 171 ISSN 0921-5093 Altmetric
2015	Microstructure evolution during isochronal annealing of a 42% cold rolled TRIP-TWIP steel Published In IOP Conference Series: Materials Science and Engineering Volume 89 Pages 012042-1 - 012042-8 ISSN 1757-8981 Altmetric
2015	Microstructures and mechanical properties of dual phase steel produced by laboratory simulated strip casting Published In Materials and Design Volume 88 Pages 537 - 549 ISSN 0264-1275 Altmetric
2015	Strengthening mechanisms in thermomechanically processed NbTi-microalloyed steel Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 46 Pages 3470 - 3480 ISSN 1073-5623 Altmetric
2015	The evolution of microstructure and mechanical properties of Ti-5Al-5Mo-5V-2Cr-1Fe during ageing Published In Journal of Alloys and Compounds Volume 629 Pages 260 - 273 ISSN 0925-8388 Altmetric
2015	The influence of partitioning on the growth of intragranular α in near-β Ti alloys Published In Journal of Alloys and Compounds Volume 643 Pages 212 - 222 ISSN 0925-8388 Altmetric
2015	The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy Published In Acta Materialia Volume 84 Pages 124 - 135 ISSN 1359-6454 Altmetric
2014	A correlative approach to segmenting phases and ferrite morphologies in transformation-induced plasticity steel using electron back-scattering diffraction and energy dispersive X-ray spectroscopy Published In Ultramicroscopy Volume 147 Pages 114 - 132 ISSN 1879-2723 Altmetric
2014	Effect of austenite deformation temperature on Nb clustering and precipitation in microalloyed steel Published In Scripta Materialia Volume 75 Pages 74 - 77 ISSN 1359-6462 Altmetric
2014	Effect of composition and thermo-mechanical processing on microstructure development in Ni-30Fe-Nb-C model alloys Published In Advanced Materials Research Volume 922 Pages 475 - 480 ISSN 1022-6680 Altmetric
2014	Effect of holding temperature and time on ferrite formation in dual phase steel produced by strip casting Published In Materials Forum Volume 38 Pages 44 - 48
2014	Effect of niobium clustering and precipitation on strength of an NbTi-microalloyed ferritic steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 607 Pages 226 - 235 ISSN 0921-5093 Altmetric
2014	On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel Published In Acta Materialia Volume 70 Pages 259 - 271 ISSN 1359-6454 Altmetric
2014	Recrystallisation in a cold drawn low cost beta titanium alloy during rapid resistance heating Published In Journal of Alloys and Compounds Volume 585 Pages 245 - 259 ISSN 0925-8388 Altmetric
2014	Role of microstructure in susceptibility to hydrogen embrittlement of X70 microalloyed steel Published In Materials Science Forum Volume 783-786 Pages 961 - 966 ISSN 0255-5476 Altmetric
2014	Self-consistent modeling of texture evolution in TWIP steel during uniaxial tension Published In Steel Research International Volume 85 Pages 1120 - 1127 ISSN 1869-344X Altmetric
2014	Self-consistent modelling of TWIP steel during uniaxial tensile loading Published In Materials Science Forum Volume 783-786 Pages 732 - 737 ISSN 0255-5476 Altmetric
2014	Self-consistent modelling of lattice strains during the in-situ tensile loading of twinning induced plasticity steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 589 Pages 66 - 75 ISSN 0921-5093 Altmetric
2014	The crystallography of carbide-free bainites in thermo-mechanically processed low Si transformation-induced plasticity steels Published In Journal of Alloys and Compounds Volume 615 Pages 96 - 110 ISSN 0925-8388 Altmetric
2014	The effect of ageing on microstructure and mechanical properties of powder Ti-5Al-5Mo-5V-1Cr-1Fe alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 605 Pages 89 - 97 ISSN 0921-5093 Altmetric
2014	The effect of processing parameters on the microstructure and mechanical properties of low-Si transformation-induced plasticity steels Published In Journal of Materials Science Volume 49 Pages 2960 - 2974 ISSN 0022-2461 Altmetric
2014	The formation of complex microstructures after different deformation modes in advanced high-strength steels Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 45 Pages 4247 - 4256 ISSN 1073-5623 Altmetric
2013	2D modelling of the effect of grain size on hydrogen diffusion in X70 steel Published In Computational Materials Science Volume 56 Pages 49 - 57 ISSN 0927-0256 Altmetric
2013	Addressing retained austenite stability in advanced high strength steels Published In Materials Science Forum Volume 738-739 Pages 212 - 216 ISSN 0255-5476 Altmetric
2013	EBSD observations of recrystallisation and tensile deformation in twinning induced plasticity steel Published In Transactions of the Indian Institute of Metals Volume 66 Pages 621 - 629 ISSN 0019-493X Altmetric
2013	Effect of Mo concentration on dynamic recrystallization behavior of low carbon microalloyed steels Published In Steel Research International Volume 84 Pages 1191 - 1195 ISSN 1869-344X Altmetric
2013	Effect of annealing on the microstructure, texture and mechanical properties of severely deformed interstitial free steel Published In Materials Science Forum Volume 706-709 Pages 1817 - 1822 ISSN 0255-5476 Altmetric
2013	Effect of austenitising and deformation temperatures on dynamic recrystallisation in Nb-Ti microalloyed steel Published In Materials Science Forum Volume 753 Pages 431 - 434 ISSN 0255-5476 Altmetric
2013	Effect of bainitic transformation on bake hardening in TRIP assisted steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 534 Pages 485 - 494 ISSN 0921-5093 Altmetric
2013	Effect of deformation temperature on niobium clustering, precipitation and austenite recrystallisation in a Nb-Ti microalloyed steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 581 Pages 16 - 25 ISSN 0921-5093 Altmetric
2013	Effect of grain size on the hydrogen diffusion process in steel using cellular automaton approach Published In Materials Science Forum Volume 706-709 Pages 1568 - 1573 ISSN 0255-5476 Altmetric
2013	Effect of iron content on sintering behavior of Ti-V-Fe-Al near-beta titanium alloy Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 43 Pages 716 - 723 ISSN 1073-5623 Altmetric
2013	Effect of manganese content and microstructure on the susceptibility of X70 pipeline steel to hydrogen cracking Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 551 Pages 40 - 49 ISSN 0921-5093 Altmetric
2013	Effect of microstructure and composition on hydrogen permeation in X70 pipeline steels Published In International Journal of Hydrogen Energy Volume 38 Pages 2544 - 2556 ISSN 0360-3199 Altmetric
2013	Evolution of microstructure and mechanical properties during annealing of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel Published In Advanced Materials Research Volume 409 Pages 719 - 724 ISSN 1022-6680 Altmetric
2013	Microstructure and texture evolution in a twinning-induced-plasticity steel during uniaxial tension Published In Acta Materialia Volume 61 Pages 2671 - 2691 ISSN 1359-6454 Altmetric
2013	Microstructure evolution and alloying elements distribution between the phases in powder near-b titanium alloys during thermo-mechanical processing Published In Journal of Materials Science Volume 47 Pages 7013 - 7025 ISSN 0022-2461 Altmetric
2013	Microstructure-property relationship in the thermomechanically processed C-Mn-Si-Nb-Al-(Mo) transformation-induced plasticity steels before and after prestraining and bake hardening treatment Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 43 Pages 2473 - 2483 ISSN 1073-5623 Altmetric
2013	On the evolution and modelling of lattice strains during the cyclic loading of TWIP steel Published In Acta Materialia Volume 61 Pages 5247 - 5262 ISSN 1359-6454 Altmetric
2013	On the feasibility of twinning nucleation via extrinsic faulting in twinning-induced plasticity steel Published In Scripta Materialia Volume 68 Pages 436 - 439 ISSN 1359-6462 Altmetric
2013	Recrystallisation behaviour of low carbon steel with and without addition of chromium Published In Materials Science Forum Volume 715-716 Pages 679 - 684 ISSN 0255-5476 Altmetric
2013	Recrystallization and mechanical behavior of high Mn and low C cold rolled and annealed steel with TWIP effect Published In Materials Science Forum Volume 715-716 Pages 579 - 584 ISSN 0255-5476 Altmetric
2013	Texture evolution during recrystallisation of cold rolled TWIP steel Published In Materials Science Forum Volume 702-703 Pages 647 - 650 ISSN 0255-5476 Altmetric
2013	The effect of cooling rates on the microstructure and mechanical properties of thermo-mechanically processed Ti-Al-Mo-V-Cr-Fe alloys Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 576 Pages 167 - 177 ISSN 0921-5093 Altmetric
2013	The effect of processing parameters on the dynamic recrystallisation behaviour of API-X70 pipeline steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 570 Pages 70 - 81 ISSN 0921-5093 Altmetric
2013	Understanding the behavior of advanced high-strength steels using atom probe tomography Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 43A Pages 3958 - 3971 ISSN 1073-5623 Altmetric

Editor Of

Book
- Phase transformations in steels. Volume 1: Fundamentals and diffusion-controlled transformations. Cambridge, United Kingdom. 2013
- Phase transformations in steels. Volume 2: Diffusionless transformations, high strength steels, modelling and advances analytical techniques. Cambridge, United Kingdom. 2013

Presentations

Featured In

Investigator On

Year	Title
2020	An upgraded nanoindenter facility with in-situ Raman at high temperature Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2017	Establishing the deformation mechanisms of metastable titanium alloys Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2017	Plasma Focused Ion Beam for High Throughput Advanced Materials Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2016 - 2017	Focused ion beam microscope for trace element analysis and nanomachining Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2011 - 2015	New insights on the role of microalloying in high strength steels Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Projects
2014	In-situ elevated temperature nano-indentation Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2013	Advanced high strength steels produced by energy efficient direct strip casting Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2013	An aberration corrected analytical transmission electron microscope for nanoscale characterisation of materials Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2013	Investigating materials on the atomic scale using 3-dimensional atom probe tomography Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2013	Plastic auxetics: a new class of materials Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2013	The Australian Steel Manufacturing Research Hub Awarded by: Australian Research Council (ARC) Funding Scheme: Industrial Transformation Research Hubs
2011	Neutron diffraction study of the deformation behaviour of TWinning Induced Plasticity (TWIP) and TWIP/TRansformation Induced Plasticity (TRIP) steels Awarded by: Australian Nuclear Science and Technology Organisation (ANSTO) Funding Scheme: Access to Major Research Facility Program
2010	Combined scanning tunnelling microscope system for nano-fabrication and characterization - filed in part 6 Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2009	A universal nano tribometer for surface and thin film characterisation Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2009	Dynamic Texture Measurement Facility Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2008	Advanced testing and structural analysis for assessment and control of hydrogen damage in structural steels Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Projects
2008	An analytical field emission gun scattering electron microscope Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2008	High field magnet for materials processing and characterisation Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2007	Advanced facility for ultra high-speed visualisation and real-time diagnostics of particles and droplets, ARC LIEF Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2007	Near net shaped casting and alloy development facility Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)

Available as Research Supervisor

Potential Supervision Topics

Thermo-mechanical processing of steels.
Phase transformations in steels.
Phase transformations in Ti alloys.
Correlative electron microscopy techniques.
Understanding cluster and precipitation strengthening mechanisms.

Teaching Activities

MATE205 Materials characterisation techniques Subject coordinator and lecturer 2016 -
MATE301 Engineering Materials Subject coordinator and lecturer 2007 - 2018

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	Microstructure and Mechanical Properties of New Thermo-Mechanically Processed V-Cr (Nb-Mo) Micro-alloyed Steels
Doctor of Philosophy	Deformation Mechanisms of near B -Ti Alloys	Shoushtari Zadeh Naseri, Pouyan
Doctor of Philosophy	The deformation behaviour of a metastable & titanium alloy.	Pinilla Ducreux, Carla Isabel

Reviewer Of

Metals (Journal) 2016 -
Scientific Reports (Journal) 2015 -
Materials Characterization (Journal) 2014 -
Materials and Design (Journal) 2014 -
Journal of Metallurgy (Journal) 2011 -
Journal of Alloys and Compounds (Journal) 2010 -
ISIJ International (Journal) 2008 -
Journal of Materials Science (Journal) 2006 -
Materials Science and Technology (Journal) 2006 -
Acta Materialia (Journal) 2003 -
Scripta Materialia (Journal) 2000 -
Journal of Materials Science and Engineering A (Journal) 1998 -
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (Journal) 1998 -

Organizer Of Event

NanoSPD7 2016 - 2017
5th International Conference on Recrystallization and Grain Growth 2011 - 2013

Professional Service Activities

Elsevier member of editorial Board for the journal of Materials Science and Engineering A 2016 -
MDPI member of Editorial Board for open-access journalMetals 2016 -
Recrystallization and Grain Growth member of International Committee 2013 -
THERMEC member of Scientific Committee 2003 -
Australian Research Council member of REC panel in ERA2015 2015
Australian Research Council member of REC panel in ERA 2010 2010

Education And Training

Ph.D. in Candidate of Sciences in Physics and Mathematics, Institute of Metal Physics, National Academy of Sciences, Ukraine 1981 - 1987
M.S.E. in Metallurgical Engineering, Kiev Polytechnical Institute, Ukraine 1975 - 1981

Awards And Honors

Honorary Doctor of Sciences and V.G. Kurdjumov Medal, conferred by Institute of Metal Physics, National Academy of Sciences, Ukraine, 2012
Sawamura Award , conferred by Iron and Steel Institute of Japan International, 2010
Best Paper Award, 2009
Dean's teaching excellence award, conferred by Faculty of Engineering, Monash University, 2006
Florence M. Taylor Medal, conferred by Institute of Materials Engineering Australasia, 2002

Keywords

Physical metallurgy
Phase transformations
Thermo-mechanical processing
Mechanical properties
Atom probe tomography
Electron microscopy
Steels
Titanium alloys

Top Publications

Year	Title
2007	Three-dimensional atom probe analysis of solute distribution in thermomechanically processed TRIP steels Published in Acta Materialia
2015	The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy Published in Acta Materialia
2012	Understanding the behavior of advanced high-strength steels using atom probe tomography Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2008	Effect of pre-straining and bake hardening on the microstructure of thermomechanically processed CMnSi TRIP steels with and without Nb and Mo additions Published in Scripta Materialia
2009	Observation of Precipitation Evolution in Fe-Ni-Mn-Ti-Al Maraging Steel by Atom Probe Tomography Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2007	Grain size, misorientation, and texture evolution of copper processed by equal channel angular extrusion and the validity of the Hall-Petch relationship Published in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy Published in Acta Materialia

Research Areas

Selected Publications

Journal Article

Year	Title
2020	An in situ synchrotron study of the localized B2↔B19' phase transformation in an Ni-Ti alloy subjected to uniaxial cyclic loading-unloading with incremental strains Published In Journal of Applied Crystallography Volume 53 Pages 335 - 348 Altmetric
2020	Martensitic wear resistant steels alloyed with titanium Published In Wear Volume 446-447 Altmetric
2020	On the Degradation of Retained Austenite in Transformation Induced Plasticity Steel Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Altmetric
2020	The effect of continuous heating on microstructure development in thermo-mechanically processed Ti-10V-3Fe-3Al alloy produced by powder metallurgy Published In Materials Characterization Volume 161 Altmetric
2020	Uncovering the mechanism of dislocation interaction with nanoscale (<4 nm) interphase precipitates in microalloyed ferritic steels Published In Materials Research Letters Volume 8 Pages 341 - 347 Altmetric
2019	A comparative study of a NiTi alloy subjected to uniaxial monotonic and cyclic loading-unloading in tension using digital image correlation: The grain size effect Published In Journal of Alloys and Compounds Volume 777 Pages 723 - 735 ISSN 0925-8388 Altmetric
2019	An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 743 Pages 327 - 338 ISSN 0921-5093 Altmetric
2019	Experimental and Self-Consistent Modeling Study of De-twinning in a Twinning-Induced Plasticity Steel Published In Journal of Metals Volume 71 Pages 1396 - 1403 ISSN 1047-4838 Altmetric
2019	Microstructure Evolution during the Production of Dual Phase and Transformation Induced Plasticity Steels Using Modified Strip Casting Simulated in the Laboratory Published In Metals Volume 9 Pages 449-1 - 449-14 Altmetric
2019	On Tetragonality of the Martensite Crystal Lattice in Steels Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 50 Pages 97 - 103 ISSN 1073-5623 Altmetric
2019	Phase-specific properties in a low-alloyed TRIP steel investigated using correlative nanoindentation measurements and electron microscopy Published In Journal of Materials Science Volume Online First Pages 1 - 10 ISSN 0022-2461 Altmetric
2019	The effect of β-phase condition on the tensile behaviour in a near-β Ti alloy produced by blended elemental powder metallurgy Published In Journal of Materials Science and Engineering A Volume 747 Pages 232 - 243 ISSN 1934-8967 Altmetric
2018	A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 726 Pages 102 - 112 ISSN 0921-5093 Altmetric
2018	Comparative effect of Mo and Cr on microstructure and mechanical properties in NbV-microalloyed bainitic steels Published In Metals Volume 8 Pages 134-1 - 134-19 Altmetric
2018	Effect of Uniaxial Tension on the Microstructure and Texture of High Mn Steel Published In Advanced Engineering Materials Volume 20 Pages 1800258-1 - 1800258-12 ISSN 1438-1656 Altmetric
2018	Effect of isochronal annealing on the microstructure, texture and mechanical properties of a cold-rolled high manganese steel Published In Materials Characterization Volume 144 Pages 66 - 76 ISSN 1044-5803 Altmetric
2018	Effect of mo, nb and v on hot deformation behaviour, microstructure and hardness of microalloyed steels Published In Materials Science Forum Volume 941 Pages 3 - 8 ISSN 0255-5476 Altmetric
2018	Formation of deformation-induced products in a metastable-B titanium alloy during high temperature compression Published In Metals Volume 8 Pages 100-1 - 100-10 Altmetric
2018	Nucleation, coarsening and deformation accommodation mechanisms of ε-martensite in a high manganese steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 731 Pages 506 - 519 ISSN 0921-5093 Altmetric
2018	On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy Published In Journal of Alloys and Compounds Volume 748 Pages 620 - 636 ISSN 0925-8388 Altmetric
2018	On the first direct observation of de-twinning in a twinning-induced plasticity steel Published In Acta Materialia Volume 156 Pages 172 - 182 ISSN 1359-6454 Altmetric
2018	Tetragonality of bcc Phases in a Transformation-Induced Plasticity Steel Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 49 Pages 5925 - 5929 ISSN 1073-5623 Altmetric
2017	Constitutive Relations Analyses of Plastic Flow in Dual-Phase Steels to Elucidate Structure–Strength–Ductility Correlations Published In Journal of Metals Volume 69 Pages 1228 - 1235 ISSN 1047-4838 Altmetric
2017	Effect of Mo on dynamic recrystallization and microstructure development of microalloyed steels Published In Metals and Materials International Volume 23 Pages 778 - 787 ISSN 1225-9438 Altmetric
2017	Evidencing extrinsic stacking faults in twinning-induced plasticity steel Published In Materials Characterization Volume 123 Pages 275 - 281 ISSN 1044-5803 Altmetric
2017	Observation of deformation twinning and martensitic transformation during nanoindentation of a transformation-induced plasticity steel Published In Scientific Reports Volume 7 Pages 17397-1 - 17397-6 ISSN 2045-2322 Altmetric
2017	Particle stimulated nucleation during dynamic and metadynamic recrystallisation of Ni-30%Fe-Nb-C alloy Published In Materials Characterization Volume 125 Pages 94 - 98 ISSN 1044-5803 Altmetric
2017	Site-specific atomic-scale characterisation of retained austenite in a strip cast TRIP steel Published In Acta Materialia Volume 134 Pages 1 - 15 ISSN 1359-6454 Altmetric
2017	Strain-induced ferrite formation and its effect on mechanical properties of a dual phase steel produced using laboratory simulated strip casting Published In Journal of Alloys and Compounds Volume 721 Pages 291 - 306 ISSN 0925-8388 Altmetric
2017	Stress-Induced Twinning and Phase Transformations during the Compression of a Ti-10V-3Fe-3Al Alloy Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 48A Pages 2791 - 2800 ISSN 1073-5623 Altmetric
2017	The effect of Nb solute and NbC precipitates on dynamic and metadynamic recrystallisation in Ni-30Fe-Nb-C model alloys Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 700 Pages 116 - 131 ISSN 0921-5093 Altmetric
2017	The effect of thermo-mechanical processing and ageing time on microstructure and mechanical properties of powder metallurgy near β titanium alloys Published In Journal of Alloys and Compounds Volume 714 Pages 610 - 618 ISSN 0925-8388 Altmetric
2017	Vanadium Microalloyed 0.25 C Cast Steels Showing As‐Forged Levels of Strength and Ductility Published In Steel Research International Volume 88 Pages 1600166-1 - 1600166-11 ISSN 1869-344X Altmetric
2016	A transmission Kikuchi diffraction study of cementite in a quenched and tempered steel Published In Materials Characterization Volume 114 Pages 146 - 150 ISSN 1044-5803 Altmetric
2016	Critical assessment 20: On carbon excess in bainitic ferrite Published In Materials Science and Technology Volume 32 Pages 99 - 103 ISSN 0267-0836 Altmetric
2016	Effect of deformation on microstructure and mechanical properties of dual phase steel produced via strip casting simulation Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 651 Pages 291 - 305 ISSN 0921-5093 Altmetric
2016	Effect of gaseous hydrogen charging on the tensile properties of standard and medium Mn X70 pipeline steels Published In Materials Science and Technology Volume 32 Pages 675 - 683 ISSN 1316-2012 Altmetric
2016	In situ synchrotron X-ray diffraction studies of the effect of microstructure on tensile behavior and retained austenite stability of thermo-mechanically processed transformation induced plasticity steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 662 Pages 185 - 197 ISSN 0921-5093 Altmetric
2016	Investigation of the effect of electrolytic hydrogen charging of X70 steel: I. The effect of microstructure on hydrogen-induced cold cracking and blistering Published In International Journal of Hydrogen Energy Volume 41 Pages 12411 - 12423 ISSN 0360-3199 Altmetric
2016	Investigation of the effect of electrolytic hydrogen charging of X70 steel: II. Microstructural and crystallographic analyses of the formation of hydrogen induced cracks and blisters Published In International Journal of Hydrogen Energy Volume 41 Pages 12424 - 12435 ISSN 0360-3199 Altmetric
2016	Microstructure and mechanical properties of strip cast TRIP steel subjected to thermo-mechanical simulation Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 677 Pages 356 - 366 ISSN 0921-5093 Altmetric
2016	Microstructure and micro-texture evolution during the dynamic recrystallisation of a Ni-30Fe-Nb-C model alloy Published In Journal of Alloys and Compounds Volume 689 Pages 250 - 265 ISSN 0925-8388 Altmetric
2016	Microstructures and mechanical properties of TRIP steel produced by strip casting simulated in the laboratory Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 664 Pages 26 - 42 ISSN 0921-5093 Altmetric
2016	On the feasibility of partial slip reversal and de-twinning during the cyclic loading of TWIP steel Published In Materials Letters Volume 182 Pages 294 - 297 ISSN 0167-577X Altmetric
2016	Strain rate dependence of deformation-induced transformation and twinning in a metastable titanium alloy Published In Acta Materialia Volume 104 Pages 190 - 200 ISSN 1359-6454 Altmetric
2015	A transmission kikuchi diffraction study of a cold-rolled and annealed Fe-17Mn-2Si-3Al-1Ni-0.06C wt% Steel Published In Steel Research International Volume 86 Pages 1204 - 1214 ISSN 1869-344X Altmetric
2015	An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading Published In Applied Physics Letters Volume 106 Pages 171911-1 - 171911-6 ISSN 0003-6951 Altmetric
2015	Application of transmission Kikuchi diffraction to a multi-phase TRIP-TWIP steel Published In Materials Today : proceedings Volume S2 Pages S647 - S650 Altmetric
2015	Hot deformation behaviour of Ni-30Fe-C and Ni-30Fe-Nb-C model alloys Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 641 Pages 160 - 171 ISSN 0921-5093 Altmetric
2015	Microstructure evolution during isochronal annealing of a 42% cold rolled TRIP-TWIP steel Published In IOP Conference Series: Materials Science and Engineering Volume 89 Pages 012042-1 - 012042-8 ISSN 1757-8981 Altmetric
2015	Microstructures and mechanical properties of dual phase steel produced by laboratory simulated strip casting Published In Materials and Design Volume 88 Pages 537 - 549 ISSN 0264-1275 Altmetric
2015	Strengthening mechanisms in thermomechanically processed NbTi-microalloyed steel Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 46 Pages 3470 - 3480 ISSN 1073-5623 Altmetric
2015	The evolution of microstructure and mechanical properties of Ti-5Al-5Mo-5V-2Cr-1Fe during ageing Published In Journal of Alloys and Compounds Volume 629 Pages 260 - 273 ISSN 0925-8388 Altmetric
2015	The influence of partitioning on the growth of intragranular α in near-β Ti alloys Published In Journal of Alloys and Compounds Volume 643 Pages 212 - 222 ISSN 0925-8388 Altmetric
2015	The influence of β phase stability on deformation mode and compressive mechanical properties of Ti-10V-3Fe-3Al alloy Published In Acta Materialia Volume 84 Pages 124 - 135 ISSN 1359-6454 Altmetric
2014	A correlative approach to segmenting phases and ferrite morphologies in transformation-induced plasticity steel using electron back-scattering diffraction and energy dispersive X-ray spectroscopy Published In Ultramicroscopy Volume 147 Pages 114 - 132 ISSN 1879-2723 Altmetric
2014	Effect of austenite deformation temperature on Nb clustering and precipitation in microalloyed steel Published In Scripta Materialia Volume 75 Pages 74 - 77 ISSN 1359-6462 Altmetric
2014	Effect of composition and thermo-mechanical processing on microstructure development in Ni-30Fe-Nb-C model alloys Published In Advanced Materials Research Volume 922 Pages 475 - 480 ISSN 1022-6680 Altmetric
2014	Effect of holding temperature and time on ferrite formation in dual phase steel produced by strip casting Published In Materials Forum Volume 38 Pages 44 - 48
2014	Effect of niobium clustering and precipitation on strength of an NbTi-microalloyed ferritic steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 607 Pages 226 - 235 ISSN 0921-5093 Altmetric
2014	On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel Published In Acta Materialia Volume 70 Pages 259 - 271 ISSN 1359-6454 Altmetric
2014	Recrystallisation in a cold drawn low cost beta titanium alloy during rapid resistance heating Published In Journal of Alloys and Compounds Volume 585 Pages 245 - 259 ISSN 0925-8388 Altmetric
2014	Role of microstructure in susceptibility to hydrogen embrittlement of X70 microalloyed steel Published In Materials Science Forum Volume 783-786 Pages 961 - 966 ISSN 0255-5476 Altmetric
2014	Self-consistent modeling of texture evolution in TWIP steel during uniaxial tension Published In Steel Research International Volume 85 Pages 1120 - 1127 ISSN 1869-344X Altmetric
2014	Self-consistent modelling of TWIP steel during uniaxial tensile loading Published In Materials Science Forum Volume 783-786 Pages 732 - 737 ISSN 0255-5476 Altmetric
2014	Self-consistent modelling of lattice strains during the in-situ tensile loading of twinning induced plasticity steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 589 Pages 66 - 75 ISSN 0921-5093 Altmetric
2014	The crystallography of carbide-free bainites in thermo-mechanically processed low Si transformation-induced plasticity steels Published In Journal of Alloys and Compounds Volume 615 Pages 96 - 110 ISSN 0925-8388 Altmetric
2014	The effect of ageing on microstructure and mechanical properties of powder Ti-5Al-5Mo-5V-1Cr-1Fe alloy Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 605 Pages 89 - 97 ISSN 0921-5093 Altmetric
2014	The effect of processing parameters on the microstructure and mechanical properties of low-Si transformation-induced plasticity steels Published In Journal of Materials Science Volume 49 Pages 2960 - 2974 ISSN 0022-2461 Altmetric
2014	The formation of complex microstructures after different deformation modes in advanced high-strength steels Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 45 Pages 4247 - 4256 ISSN 1073-5623 Altmetric
2013	2D modelling of the effect of grain size on hydrogen diffusion in X70 steel Published In Computational Materials Science Volume 56 Pages 49 - 57 ISSN 0927-0256 Altmetric
2013	Addressing retained austenite stability in advanced high strength steels Published In Materials Science Forum Volume 738-739 Pages 212 - 216 ISSN 0255-5476 Altmetric
2013	EBSD observations of recrystallisation and tensile deformation in twinning induced plasticity steel Published In Transactions of the Indian Institute of Metals Volume 66 Pages 621 - 629 ISSN 0019-493X Altmetric
2013	Effect of Mo concentration on dynamic recrystallization behavior of low carbon microalloyed steels Published In Steel Research International Volume 84 Pages 1191 - 1195 ISSN 1869-344X Altmetric
2013	Effect of annealing on the microstructure, texture and mechanical properties of severely deformed interstitial free steel Published In Materials Science Forum Volume 706-709 Pages 1817 - 1822 ISSN 0255-5476 Altmetric
2013	Effect of austenitising and deformation temperatures on dynamic recrystallisation in Nb-Ti microalloyed steel Published In Materials Science Forum Volume 753 Pages 431 - 434 ISSN 0255-5476 Altmetric
2013	Effect of bainitic transformation on bake hardening in TRIP assisted steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 534 Pages 485 - 494 ISSN 0921-5093 Altmetric
2013	Effect of deformation temperature on niobium clustering, precipitation and austenite recrystallisation in a Nb-Ti microalloyed steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 581 Pages 16 - 25 ISSN 0921-5093 Altmetric
2013	Effect of grain size on the hydrogen diffusion process in steel using cellular automaton approach Published In Materials Science Forum Volume 706-709 Pages 1568 - 1573 ISSN 0255-5476 Altmetric
2013	Effect of iron content on sintering behavior of Ti-V-Fe-Al near-beta titanium alloy Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 43 Pages 716 - 723 ISSN 1073-5623 Altmetric
2013	Effect of manganese content and microstructure on the susceptibility of X70 pipeline steel to hydrogen cracking Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 551 Pages 40 - 49 ISSN 0921-5093 Altmetric
2013	Effect of microstructure and composition on hydrogen permeation in X70 pipeline steels Published In International Journal of Hydrogen Energy Volume 38 Pages 2544 - 2556 ISSN 0360-3199 Altmetric
2013	Evolution of microstructure and mechanical properties during annealing of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel Published In Advanced Materials Research Volume 409 Pages 719 - 724 ISSN 1022-6680 Altmetric
2013	Microstructure and texture evolution in a twinning-induced-plasticity steel during uniaxial tension Published In Acta Materialia Volume 61 Pages 2671 - 2691 ISSN 1359-6454 Altmetric
2013	Microstructure evolution and alloying elements distribution between the phases in powder near-b titanium alloys during thermo-mechanical processing Published In Journal of Materials Science Volume 47 Pages 7013 - 7025 ISSN 0022-2461 Altmetric
2013	Microstructure-property relationship in the thermomechanically processed C-Mn-Si-Nb-Al-(Mo) transformation-induced plasticity steels before and after prestraining and bake hardening treatment Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 43 Pages 2473 - 2483 ISSN 1073-5623 Altmetric
2013	On the evolution and modelling of lattice strains during the cyclic loading of TWIP steel Published In Acta Materialia Volume 61 Pages 5247 - 5262 ISSN 1359-6454 Altmetric
2013	On the feasibility of twinning nucleation via extrinsic faulting in twinning-induced plasticity steel Published In Scripta Materialia Volume 68 Pages 436 - 439 ISSN 1359-6462 Altmetric
2013	Recrystallisation behaviour of low carbon steel with and without addition of chromium Published In Materials Science Forum Volume 715-716 Pages 679 - 684 ISSN 0255-5476 Altmetric
2013	Recrystallization and mechanical behavior of high Mn and low C cold rolled and annealed steel with TWIP effect Published In Materials Science Forum Volume 715-716 Pages 579 - 584 ISSN 0255-5476 Altmetric
2013	Texture evolution during recrystallisation of cold rolled TWIP steel Published In Materials Science Forum Volume 702-703 Pages 647 - 650 ISSN 0255-5476 Altmetric
2013	The effect of cooling rates on the microstructure and mechanical properties of thermo-mechanically processed Ti-Al-Mo-V-Cr-Fe alloys Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 576 Pages 167 - 177 ISSN 0921-5093 Altmetric
2013	The effect of processing parameters on the dynamic recrystallisation behaviour of API-X70 pipeline steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing Volume 570 Pages 70 - 81 ISSN 0921-5093 Altmetric
2013	Understanding the behavior of advanced high-strength steels using atom probe tomography Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science Volume 43A Pages 3958 - 3971 ISSN 1073-5623 Altmetric

Editor Of

Book
- Phase transformations in steels. Volume 1: Fundamentals and diffusion-controlled transformations. Cambridge, United Kingdom. 2013
- Phase transformations in steels. Volume 2: Diffusionless transformations, high strength steels, modelling and advances analytical techniques. Cambridge, United Kingdom. 2013

Presentations

Featured In

Investigator On

Year	Title
2020	An upgraded nanoindenter facility with in-situ Raman at high temperature Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2017	Establishing the deformation mechanisms of metastable titanium alloys Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2017	Plasma Focused Ion Beam for High Throughput Advanced Materials Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2016 - 2017	Focused ion beam microscope for trace element analysis and nanomachining Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2011 - 2015	New insights on the role of microalloying in high strength steels Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Projects
2014	In-situ elevated temperature nano-indentation Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2013	Advanced high strength steels produced by energy efficient direct strip casting Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2013	An aberration corrected analytical transmission electron microscope for nanoscale characterisation of materials Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2013	Investigating materials on the atomic scale using 3-dimensional atom probe tomography Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2013	Plastic auxetics: a new class of materials Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2013	The Australian Steel Manufacturing Research Hub Awarded by: Australian Research Council (ARC) Funding Scheme: Industrial Transformation Research Hubs
2011	Neutron diffraction study of the deformation behaviour of TWinning Induced Plasticity (TWIP) and TWIP/TRansformation Induced Plasticity (TRIP) steels Awarded by: Australian Nuclear Science and Technology Organisation (ANSTO) Funding Scheme: Access to Major Research Facility Program
2010	Combined scanning tunnelling microscope system for nano-fabrication and characterization - filed in part 6 Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2009	A universal nano tribometer for surface and thin film characterisation Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2009	Dynamic Texture Measurement Facility Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2008	Advanced testing and structural analysis for assessment and control of hydrogen damage in structural steels Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Projects
2008	An analytical field emission gun scattering electron microscope Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2008	High field magnet for materials processing and characterisation Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2007	Advanced facility for ultra high-speed visualisation and real-time diagnostics of particles and droplets, ARC LIEF Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2007	Near net shaped casting and alloy development facility Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)

Potential Supervision Topics

Thermo-mechanical processing of steels.
Phase transformations in steels.
Phase transformations in Ti alloys.
Correlative electron microscopy techniques.
Understanding cluster and precipitation strengthening mechanisms.

Teaching Activities

MATE205 Materials characterisation techniques Subject coordinator and lecturer 2016 -
MATE301 Engineering Materials Subject coordinator and lecturer 2007 - 2018

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	Microstructure and Mechanical Properties of New Thermo-Mechanically Processed V-Cr (Nb-Mo) Micro-alloyed Steels
Doctor of Philosophy	Deformation Mechanisms of near B -Ti Alloys	Shoushtari Zadeh Naseri, Pouyan
Doctor of Philosophy	The deformation behaviour of a metastable & titanium alloy.	Pinilla Ducreux, Carla Isabel

Reviewer Of

Metals (Journal) 2016 -
Scientific Reports (Journal) 2015 -
Materials Characterization (Journal) 2014 -
Materials and Design (Journal) 2014 -
Journal of Metallurgy (Journal) 2011 -
Journal of Alloys and Compounds (Journal) 2010 -
ISIJ International (Journal) 2008 -
Journal of Materials Science (Journal) 2006 -
Materials Science and Technology (Journal) 2006 -
Acta Materialia (Journal) 2003 -
Scripta Materialia (Journal) 2000 -
Journal of Materials Science and Engineering A (Journal) 1998 -
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (Journal) 1998 -

Organizer Of Event

NanoSPD7 2016 - 2017
5th International Conference on Recrystallization and Grain Growth 2011 - 2013

Professional Service Activities

Elsevier member of editorial Board for the journal of Materials Science and Engineering A 2016 -
MDPI member of Editorial Board for open-access journalMetals 2016 -
Recrystallization and Grain Growth member of International Committee 2013 -
THERMEC member of Scientific Committee 2003 -
Australian Research Council member of REC panel in ERA2015 2015
Australian Research Council member of REC panel in ERA 2010 2010

Education And Training

Ph.D. in Candidate of Sciences in Physics and Mathematics, Institute of Metal Physics, National Academy of Sciences, Ukraine 1981 - 1987
M.S.E. in Metallurgical Engineering, Kiev Polytechnical Institute, Ukraine 1975 - 1981

Awards And Honors

Honorary Doctor of Sciences and V.G. Kurdjumov Medal, conferred by Institute of Metal Physics, National Academy of Sciences, Ukraine, 2012
Sawamura Award , conferred by Iron and Steel Institute of Japan International, 2010
Best Paper Award, 2009
Dean's teaching excellence award, conferred by Faculty of Engineering, Monash University, 2006
Florence M. Taylor Medal, conferred by Institute of Materials Engineering Australasia, 2002

Keywords

Physical metallurgy
Phase transformations
Thermo-mechanical processing
Mechanical properties
Atom probe tomography
Electron microscopy
Steels
Titanium alloys

Located In Facility

Building 2, Room 110

Orcid Id

http://orcid.org/0000-0002-3490-3078 (confirmed)

Scopus Id

7003886801

Overview

Overview

Top Publications

Research Areas

Available as Research Supervisor

Publications

Selected Publications

Journal Article

Editor Of

Book

Presentations

Invited Talk

Presentation

Featured In

Funding

Investigator On

Supervision

Available as Research Supervisor

Potential Supervision Topics

Teaching Activities

Advisees

Graduate Advising Relationship

Service

Reviewer Of

Organizer Of Event

Professional Service Activities

Background

Education And Training

Awards And Honors

Keywords

Contact

Located In Facility

Identity

Orcid Id

Scopus Id

Overview

Top Publications

Research Areas

Publications

Selected Publications

Journal Article

Editor Of

Book

Presentations

Invited Talk

Presentation

Featured In

Funding

Investigator On

Supervision

Potential Supervision Topics

Teaching Activities

Advisees

Graduate Advising Relationship

Service

Reviewer Of

Organizer Of Event

Professional Service Activities

Background

Education And Training

Awards And Honors

Keywords

Contact

Located In Facility

Identity

Orcid Id

Scopus Id

Visualisations

Research Areas