Dunne, Druce Professor

Selected Publications

• Journal Article

  Year	Title
  2018	Comparison of GMAW and SAW for NGW of 50 mm Q&T Steel Plate Published In Journal of Welding and Joining
  2018	Effect of cooling rate on microstructural evolution and hardness of self-shielded arc weld deposits containing 1 wt% aluminium Published In Welding in the World
  2017	Dilution and C content estimation of stellite 6 fabricated on a 1050 steel substrate by laser cladding Published In Solid State Phenomena
  2017	Structural metastability of “cold” repair welds in 2.25Cr-1Mo (P22) steel under elevated temperature and stress conditions Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2016	Effect of gaseous hydrogen charging on the tensile properties of standard and medium Mn X70 pipeline steels Published In Materials Science and Technology
  2016	Investigation of the effect of electrolytic hydrogen charging of X70 steel: I. The effect of microstructure on hydrogen-induced cold cracking and blistering Published In International Journal of Hydrogen Energy
  2016	Investigation of the effect of electrolytic hydrogen charging of X70 steel: II. Microstructural and crystallographic analyses of the formation of hydrogen induced cracks and blisters Published In International Journal of Hydrogen Energy
  2015	Effect of heat input on Stellite 6 coatings on a medium carbon steel substrate by laser cladding Published In Materials Today
  2015	Evaluation of Two Different Energy Inputs for Deposition of Stellite 6 by Laser Cladding on a Martensitic Stainless Steel Substrate
  2015	Evolution of stress and microstructure during gapped bead-on-plate testing of quenched and tempered steel Published In Australasian Welding Journal
  2015	Weld metal microstructures of hardfacing deposits produced by self-shielded flux-cored arc welding Published In Australasian Welding Journal
  2014	A Comparative study for wear resistant of Stellite 6 coatings on nickel alloy substrate produced by laser cladding, HVOF and plasma spraying techniques Published In International Journal of Current Engineering and Technology
  2014	Effect of two different energy inputs for laser cladding of stellite 6 on P91 and P22 steel substrates Published In Procedia Materials Science
  2014	Laser cladding of stainless steel substrates with stellite 6 Published In Materials Science Forum
  2014	Laser cladding of wear resistant Stellite 6 coating on P22 steel substrate with two different energy inputs Published In Advanced Materials Research
  2014	Prediction of weld metal microstructure of self-shielded arc hardfacing welds resistant to metal-to-metal wear Published In Welding in the World
  2014	Role of microstructure in susceptibility to hydrogen embrittlement of X70 microalloyed steel Published In Materials Science Forum
  2014	Study of laser cladding of stellite 6 on nickel superalloy substrate with two different energy inputs Published In Advanced Materials Research
  2014	Surface treatment evaluation of induction hardened and tempered 1045 steel Published In International Journal of Current Engineering and Technology
  2014	Wear behaviour of stellite 6 coatings produced on an austenitic stainless steel substrate by laser cladding using two different heat inputs Published In Applied Mechanics and Materials
  2013	Deposition of Stellite 6 on nickel superalloy and mild steel substrates with laser cladding Published In International Journal of Advanced Materials Manufacturing and Characterization
  2013	Effect of microstructure and composition on hydrogen permeation in X70 pipeline steels Published In International Journal of Hydrogen Energy
  2013	Re-austenitisation of chromium-bearing pressure vessel steels during the weld thermal cycle Published In Australasian Welding Journal - Welding Research Supplement
  2013	Structural and hardness gradients in the heat affected zone of welded low carbon martensitic steels Published In Materials Science Forum
  2012	Effect of grain size on the hydrogen diffusion process in steel using cellular automaton approach Published In Materials Science Forum
  2012	Effect of manganese content and microstructure on the susceptibility of X70 pipeline steel to hydrogen cracking Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2011	Hardness and microstructural gradients in the heat affected zone of welded low-carbon quenched and tempered steels
  2010	Effect of Si on the reversibility of stress-induced martensite in Fe-Mn-Si shape memory alloys Published In Acta Materialia
  2010	Review: Interaction of precipitation with recrystallisation and phase transformation in low alloy steels Published In Materials Science and Technology
  2010	Role of microstructure in susceptibility of X70 pipeline steel to hydrogen embrittlement Published In Materials Science Forum
  2009	Cavitation erosion resistance of NITI thin films produced by filterer arc deposition Published In Wear
  2008	Characterisation of Ni¿Ti thin films produced by filtered arc deposition Published In Materials Science and Engineering A
  2008	Effect of plate thickness on the structure, properties and PWHT response of welds in 2.25% Cr-1% Mo steel
  2008	Effect of pre-heat on the structure and porperties of welds in thin walled 2.25% Cr-1% Mo tubes
  2008	Re-examination of the effect of NbC precipitation on shape memory in Fe-Mn-Si-based alloys Published In Scripta Materialia
  2007	Artificial neural networks for predicting diffusible hydrogen content and cracking susceptibility in rutile flux-cored arc welds Published In Journal of Materials Processing Technology
  2007	Austenite stability in Fe-Mn-Si based shape memory alloys Published In Journal of Alloys and Compounds
  2007	Effect of Alloying Additions on the SFE, Neel Temperature and Shape Memory Effect in Fe-Mn-Si-based Alloys Published In ISIJ Internationa
  2007	Effect of second-phase particles on shape memory in Fe-Mn-Si-based alloys Published In Materials Science and Engineering A
  2007	Martensite/particle interactions and the shape memory effect in an Fe-Mn-Si-based alloy Published In Journal of Materials Science
  1999	Factors influencing shape memory effect and phase transformation behaviour of Fe-Mn-Si based shape memory alloys Published In Materials Science and Engineering A
  1999	The role of vacancies on inhibition of reverse transformation in rapidly solidified Ni66Al34 alloy Published In Materials Science and Engineering A
  1998	Structural evolution of pulsed Nd-YAG laser welds of AISI 1006 steel Published In Science and Technology of Welding & Joining
  1997	Determination of the parent grain orientation and habit plane normals for ß¿1 martensite in a Cu-Al-Ni-Mn shape memory alloy Published In Journal of Materials Science
  1997	Microstructural development during the microwave sintering of yttria-zirconia ceramics Published In Journal of the American Ceramic Society
  1997	New corrosion resistant iron-based shape memory alloys Published In ISIJ International
  1996	Age hardening in a Cu-bearing high strength low alloy steel Published In ISIJ International
  1996	Austenite grain coarsening and formation of intragranular ferrite in HSLA steels deoxidized with Ti and Al Published In Materials Transactions, JIM
  1996	Cross-sectional transmission electron microscopy characterisation of plasma immersion ion implanted austenitic stainless steel Published In Surface and Coatings Technology
  1996	Effect of large particles and fine precipitates on recrystallization and transformation behaviour of Ti treated low carbon TiO steel Published In ISIJ International
  1996	Formation of abnormally thick amorphous layer in austenitic stainless steel by nitrogen ion implantation Published In Materials Science Forum
  1996	Grain growth predictions in microalloyed steels Published In ISIJ International
  1996	Isothermal transformation products in a Cu-bearing high strength low alloy steel Published In ISIJ International
  1996	Plasma immersion ion implantation (PI3) and r.f. plasma nitriding of a microalloyed steel Published In Surface and Coatings Technology
  1996	Sintering and grain growth of 3 mol% yttria zirconia in a microwave field Published In Journal of Materials Science
  1995	Effect of Precipitation on Martensitic Transformation and Shape Memory Behaviour in Rapidly Solidified Ni 66 Al 34 Published In The European Physical Journal Special Topics
  1995	Evolution of the microstructure of austenitic stainless steel nitrogen implanted at elevated temperatures Published In Surface and Coatings Technology
  1995	Plasma nitriding of microalloyed steel Published In Surface and Coatings Technology
  1995	The Martensite Interface - How Regular is the Habit?
  1991	Effect of Quenching Rate on the Structure and Transformation Characteristics of a Cu-Al-Ni-Mn-Ti Shape Memory Alloy
  1991	Shape Strains Associated with Forward and Reverse Martensitic Transformation in a Cu-Al-Ni Shape Memory Alloy
  1991	The Effect of Thermomechanical Treatment of the Beta Phase on the Structure of the Martensite in Cu-Al-Ni-Based Shape Memory Alloys
  1991	The Effect of Ti and Ti°1Mb Additions on a Formation and Restoration during Intercritical Rolling and Holding of C-Mn Structural Steels Published In ISIJ International
  1986	Thermal characteristics of a nitinol heat engine Published In Journal of Materials Science
  1985	Direct determination of the dilatation parameter for martensite in a CuAlNi shape memory alloy Published In Scripta Metallurgica
  1985	Martensitic transformation in nitinol Published In Metallography
  1985	Metallographic method for nitinol Published In Metallography
  1983	Crystallographic orientation relationships in the tin-lead-cadmium ternary eutectic Published In Journal of Materials Science
  1983	The Effect of Order on the Martensitic Transformation in Fe3Pt Published In MRS Advances
  1982	Aging Effects in Copper-Based Shape Memory Alloys Published In Metallurgical Transactions A
  1982	Shape strains associated with thermally-induced and stress-induced martensite in a CuAlNi shape memory alloy Published In Acta Metallurgica
  1982	The structure of martensite in a CUZNAL Alloy Published In Scripta Metallurgica
  1981	Metallographic method for manganese-copper alloys Published In Metallography
  1981	The Long Term Structural Stability of the Eutectic Composites Cd-Zn and Pb-Cd Published In MRS Advances
  1977	A metallographic study of creep in zirconium Published In Metallography
  1977	A model for the interface of (3, 15, 10)F martensite in steel Published In Scripta Metallurgica
  1973	The effect of austenite ordering on the martensite transformation in Fe-Pt alloys near the composition Fe3Pt: I. Morphology and transformation characteristics Published In Metallurgical and Materials Transactions B
  1973	The effect of austenite ordering on the martensite transformation in Fe-Pt alloys near the composition Fe3Pt: II. Crystallography and general features Published In Metallurgical and Materials Transactions B
  1971	An assessment of the double shear theory as applied to ferrous martensitic transformations Published In Acta Metallurgica
  1971	Some characteristics of the austenite-martensite transformation as determined by a simplified electrical resistivity technique Published In Metallurgical and Materials Transactions B
  1971	The crystallography of ferrous martensites Published In Metallurgical and Materials Transactions B
  1970	On the validity of methods for determining the shape strain in deformation twinning and martensitic transformations Published In Acta Metallurgica
  1969	Measurement of the shape strain for the (225) and (259) martensitic transformations Published In Acta Metallurgica
  1969	The role of plastic accommodation in the (225) martensite transformation Published In Acta Metallurgica

• Chapter

  Year	Title
  2012	4 Shape memory in ferrous alloys Published In Phase Transformations in Steels Publisher Elsevier
  2012	Contributor contact details Published In Phase Transformations in Steels Publisher Elsevier
  2012	Shape memory in ferrous alloys Published In Phase transformations in steels: diffusionless transformations, high strength steels, modelling and advanced analytical techniques
  2010	A Tribute to C. Marvin Wayman Published In ICOMAT Publisher John Wiley & Sons, Inc.
  2009	10 Weld metal cracking in cellulosic girth welds of pipelines Published In Weld Cracking in Ferrous Alloys
  2009	Weld metal cracking in cellulosic girth welds of pipelines Published In Weld Cracking in Ferrous Alloys
  1997	EFFECT OF HYDROGEN ON FRACTURE MORPHOLOGY OF HYDROGEN ASSISTED CRACKING IN STEEL WELDMENTS Published In Advances in Fracture Research Publisher Elsevier
  1994	Dependence of transformation temperatures on the type of martensite formed in a rapidly quenched copper based shape memory alloy Published In Ecomaterials Publisher Elsevier
  1994	The effect of parent phase strengthening on shape memory behaviour of ferrous alloys Published In Ecomaterials Publisher Elsevier
  1982	Dynamic Recovery and Recrystallization in a Duplex Stainless Steel Published In Strength of Metals and Alloys (ICSMA 6) Publisher Elsevier
  1982	Ferrite Grain Refinement in HSLA Steels Published In Strength of Metals and Alloys (ICSMA 6) Publisher Elsevier

• Conference Paper

  Year	Title
  2016	Measuring Dilution and Wear for Laser Cladding of Stellite 6 Produced on a P91 Steel Substrate using Two Different Heat Inputs Published In MATEC Web of Conferences: Volume 70: 2016 The 3rd International Conference on Manufacturing and Industrial Technologies
  2008	A Tribute to C. Marvin Wayman Published In Proceedings of the International Conference on Martensitic Transformations
  2008	An Historical Account of the Development of the Bowles-MacKenzie Theory of the Crystallography of Martensite Transformation Published In Proceedings of the Internationl Conference on Martensitic Transformations
  2004	A comparative study of Stellite 6 coatings produced by Laser cladding, HVOF and plasma spraying techniques Published In PICALO 2004 - 1st Pacific International Conference on Applications of Laser and Optics, Conference Proceedings
  1998	Nitrogenation during ball milling of stainless steel Published In Materials Science Forum
  1998	Quality and Productivity Improvements in the Field Welding of High Strength Thin Walled Pipelines
  1996	Microstructural evolution in high temperature nitrogen implanted stainless steel Published In Materials Science Forum
  1996	Numerical and experimental investigation of tandem pulsed Nd:YAG laser welding