Cuiuri, Dominic

Research Overview

High speed mechatronic control of arc welding processes

Design and development of high-current & high-voltage power electronics circuits & systems

Future Research Topics
Improved processes and techniques for gas transmission pipeline construction

Technology demonstrator/testbed for automated welding of gas pipelines

Novel mechatronic control of gas metal arc welding (GMAW) processes for greater fit-up tolerance in manufacturing

Gas tungsten arc welding of titanium for additive manufacturing in the aerospace industry

Selected Publications

Journal Article

Year	Title
2020	Effect of Magnetic Arc Oscillation on the geometry of single-pass multi-layer walls and the process stability in wire and arc additive manufacturing Published In Journal of Materials Processing Technology
2020	Effect of post-weld heat treatment on microstructure and mechanical properties of deep penetration autogenous TIG-welded dissimilar joint between creep strength enhanced ferritic steel and austenitic stainless steel Published In International Journal of Advanced Manufacturing Technology
2020	Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy Published In Additive Manufacturing
2019	A combination of keyhole GTAW with a trapezoidal interlayer: A new insight into armour steel welding Published In Materials
2019	Diffraction line profile analysis of 3D wedge samples of Ti-6Al-4V fabricated using four different additive manufacturing processes Published In Metals
2019	Effect of heat input on weld formation and tensile properties in keyhole mode TIG welding process Published In Metals
2019	Improving the weld microstructure and material properties of K-TIG welded armour steel joint using filler material Published In International Journal of Advanced Manufacturing Technology
2019	Introduction of ternary alloying element in wire arc additive manufacturing of titanium aluminide intermetallic Published In Additive Manufacturing
2019	Microstructural characterization and mechanical properties of K-TIG welded SAF2205/AISI316L dissimilar joint Published In Journal of Manufacturing Processes
2019	Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling Published In Science and Technology of Welding and Joining
2019	Neutron diffraction residual stress determinations in Fe3Al based iron aluminide components fabricated using wire-arc additive manufacturing (WAAM) Published In Additive Manufacturing
2019	Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing Published In Materials Letters
2018	A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement Published In Journal of Manufacturing Processes
2018	Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behaviour Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4V alloy deposited by wire arc additive manufacturing Published In Additive Manufacturing
2018	Influences of postproduction heat treatment on Fe3Al-based iron aluminide fabricated using the wire-arc additive manufacturing process Published In International Journal of Advanced Manufacturing Technology
2018	Investigation into the viability of K-TIG for joining armour grade quenched and tempered steel Published In Journal of Manufacturing Processes
2018	Machining of GTAW additively manufactured Ti-6Al-4V structures Published In International Journal of Advanced Manufacturing Technology
2018	The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution Published In Corrosion Science
2018	The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy Published In Journal of Materials Processing Technology
2018	The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process Published In Additive Manufacturing
2017	Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V Published In Journal of Materials Processing Technology
2017	Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process Published In International Journal of Advanced Manufacturing Technology
2017	Optimising the welding conditions to determine the influence of shielding gas on fume formation rate and particle size distribution for gas metal arc welding Published In Welding in the World
2016	Adaptive path planning for wire-feed additive manufacturing using medial axis transformation Published In Journal of Cleaner Production
2016	Automatic multi-direction slicing algorithms for wire based additive manufacturing Published In Robotics and Computer Integrated Manufacturing
2016	Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing Published In Robotics and Computer Integrated Manufacturing
2016	Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2016	In-depth study of the mechanical properties for Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	The effect of postproduction heat treatment on γ-TiAl alloys produced by the GTAW-based additive manufacturing process Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part Published In Computer Aided Design
2015	A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM) Published In Robotics and Computer Integrated Manufacturing
2015	A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures Published In Robotics and Computer Integrated Manufacturing
2015	Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding Published In Additive Manufacturing
2015	Fabrication of iron-rich Fe-Al intermetallics using the wire-arc additive manufacturing process Published In Additive Manufacturing
2015	The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2015	Wire-feed additive manufacturing of metal components: technologies, developments and future interests Published In International Journal of Advanced Manufacturing Technology
2014	A tool-path generation strategy for wire and arc additive manufacturing Published In International Journal of Advanced Manufacturing Technology
2014	Characterization of in-situ alloyed and additively manufactured titanium aluminides Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Effects of wire feed conditions on in situ alloying and additive layer manufacturing of titanium aluminides using gas tungsten arc welding Published In Journal of Materials Research
2014	Feasibility study of low force robotic friction stir process and its effect on cavitation erosion and electrochemical corrosion for Ni Al bronze alloys Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Measurement of residual stresses in titanium aerospace components formed via additive manufacturing Published In Materials Science Forum
2014	The controlled short circuit GMAW process: a tutorial Published In Journal of Manufacturing Processes
2012	Investigation on welding arc interruptions in the presence of magnetic fields: Arc length, torch angle and current pulsing frequency influence Published In IEEE Transactions on Plasma Science
2012	Investigation on welding arc interruptions in the presence of magnetic fields: Welding current influence Published In IEEE Transactions on Plasma Science
2011	Preliminary evaluations on laser - Tandem GMAW Published In Welding in the World
2010	Influence of shielding gas on fume formation rate and particle size distribution for optimised GMAW Published In Australasian Welding Journal
2008	Preliminary evaluation of laser-tandem GMAW Published In Australasian Welding Journal

Chapter

Year	Title
2015	Process planning strategy for wire and ARC additive manufacturing Published In Robotic Welding, Intelligence and Automation Publisher Switzerland

Conference Paper

Year	Title
2015	A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography Published In 41st Annual Review of Progress in quantitative Nondestructive Evaluation
2015	Process planning for robotic wire and arc additive manufacturing Published In Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015
2014	Investigation of residual stresses in titanium aerospace components formed via additive manufacturing Published In 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014
2013	Additive manufacture of titanium alloys using integrated robotic GTAW welding Published In International Conference on Joining Materials 17
2013	Characterisation of metal deposition during additive manufacturing of Ti-6Al-4V BY arc-wire methods Published In Twenty Forth Annual International Solid Freeform Fabrication Symposium
2011	Real time monitoring of heat input in manual Exx10 root pass welds Published In Joint Technical Meeting on Pipeline Research
2008	A Flexible Control Program for Research and Development in Tandem GMA Welding Published In International Institute of Welding (IIW) International Congress & 2nd Latin American Welding Congress
2008	Investigations of Tandem GMA Welding Using a Flexible Computer Controlled Power Source System Published In Computer Technology in Welding and Manufacturing Conference
2007	A flexible approach to on-site power filtering and supply backup using high capacity high temperature SMES for maximum equipment utility Published In Australasian Universities Power Engineering Conference

Investigator On

Year	Title
2010	Energy Pipelines CRC Awarded by: NSW Industry & Investment Funding Scheme: NSW Science Leveraging Fund
2009	Compact high voltage superconducting fault current limiter employing a new core architecture and novel magnetic materials Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Projects

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Master of Philosophy - EIS	Process control for WAAM using computer vision

Education And Training

Ph.D., University of Wollongong, Faculty of Informatics 2000
B.E. in Electrical Engineering, University of Wollongong 1988

Research Overview

High speed mechatronic control of arc welding processes

Design and development of high-current & high-voltage power electronics circuits & systems

Future Research Topics
Improved processes and techniques for gas transmission pipeline construction

Technology demonstrator/testbed for automated welding of gas pipelines

Novel mechatronic control of gas metal arc welding (GMAW) processes for greater fit-up tolerance in manufacturing

Gas tungsten arc welding of titanium for additive manufacturing in the aerospace industry

Selected Publications

Journal Article

Year	Title
2020	Effect of Magnetic Arc Oscillation on the geometry of single-pass multi-layer walls and the process stability in wire and arc additive manufacturing Published In Journal of Materials Processing Technology
2020	Effect of post-weld heat treatment on microstructure and mechanical properties of deep penetration autogenous TIG-welded dissimilar joint between creep strength enhanced ferritic steel and austenitic stainless steel Published In International Journal of Advanced Manufacturing Technology
2020	Evolution of crystallographic orientation, precipitation, phase transformation and mechanical properties realized by enhancing deposition current for dual-wire arc additive manufactured Ni-rich NiTi alloy Published In Additive Manufacturing
2019	A combination of keyhole GTAW with a trapezoidal interlayer: A new insight into armour steel welding Published In Materials
2019	Diffraction line profile analysis of 3D wedge samples of Ti-6Al-4V fabricated using four different additive manufacturing processes Published In Metals
2019	Effect of heat input on weld formation and tensile properties in keyhole mode TIG welding process Published In Metals
2019	Improving the weld microstructure and material properties of K-TIG welded armour steel joint using filler material Published In International Journal of Advanced Manufacturing Technology
2019	Introduction of ternary alloying element in wire arc additive manufacturing of titanium aluminide intermetallic Published In Additive Manufacturing
2019	Microstructural characterization and mechanical properties of K-TIG welded SAF2205/AISI316L dissimilar joint Published In Journal of Manufacturing Processes
2019	Mitigation of thermal distortion in wire arc additively manufactured Ti6Al4V part using active interpass cooling Published In Science and Technology of Welding and Joining
2019	Neutron diffraction residual stress determinations in Fe3Al based iron aluminide components fabricated using wire-arc additive manufacturing (WAAM) Published In Additive Manufacturing
2019	Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing Published In Materials Letters
2018	A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement Published In Journal of Manufacturing Processes
2018	Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behaviour Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Effects of heat accumulation on microstructure and mechanical properties of Ti6Al4V alloy deposited by wire arc additive manufacturing Published In Additive Manufacturing
2018	Influences of postproduction heat treatment on Fe3Al-based iron aluminide fabricated using the wire-arc additive manufacturing process Published In International Journal of Advanced Manufacturing Technology
2018	Investigation into the viability of K-TIG for joining armour grade quenched and tempered steel Published In Journal of Manufacturing Processes
2018	Machining of GTAW additively manufactured Ti-6Al-4V structures Published In International Journal of Advanced Manufacturing Technology
2018	The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6Al-4V alloy in 3.5% NaCl solution Published In Corrosion Science
2018	The effects of forced interpass cooling on the material properties of wire arc additively manufactured Ti6Al4V alloy Published In Journal of Materials Processing Technology
2018	The influence of post-production heat treatment on the multi-directional properties of nickel-aluminum bronze alloy fabricated using wire-arc additive manufacturing process Published In Additive Manufacturing
2017	Effects of heat accumulation on the arc characteristics and metal transfer behavior in Wire Arc Additive Manufacturing of Ti6Al4V Published In Journal of Materials Processing Technology
2017	Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wire-arc additive manufacturing process Published In International Journal of Advanced Manufacturing Technology
2017	Optimising the welding conditions to determine the influence of shielding gas on fume formation rate and particle size distribution for gas metal arc welding Published In Welding in the World
2016	Adaptive path planning for wire-feed additive manufacturing using medial axis transformation Published In Journal of Cleaner Production
2016	Automatic multi-direction slicing algorithms for wire based additive manufacturing Published In Robotics and Computer Integrated Manufacturing
2016	Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing Published In Robotics and Computer Integrated Manufacturing
2016	Fabrication of Fe-FeAl Functionally Graded Material Using the Wire-Arc Additive Manufacturing Process Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2016	In-depth study of the mechanical properties for Fe3Al based iron aluminide fabricated using the wire-arc additive manufacturing process Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	The effect of postproduction heat treatment on γ-TiAl alloys produced by the GTAW-based additive manufacturing process Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part Published In Computer Aided Design
2015	A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM) Published In Robotics and Computer Integrated Manufacturing
2015	A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures Published In Robotics and Computer Integrated Manufacturing
2015	Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding Published In Additive Manufacturing
2015	Fabrication of iron-rich Fe-Al intermetallics using the wire-arc additive manufacturing process Published In Additive Manufacturing
2015	The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2015	Wire-feed additive manufacturing of metal components: technologies, developments and future interests Published In International Journal of Advanced Manufacturing Technology
2014	A tool-path generation strategy for wire and arc additive manufacturing Published In International Journal of Advanced Manufacturing Technology
2014	Characterization of in-situ alloyed and additively manufactured titanium aluminides Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Effects of wire feed conditions on in situ alloying and additive layer manufacturing of titanium aluminides using gas tungsten arc welding Published In Journal of Materials Research
2014	Feasibility study of low force robotic friction stir process and its effect on cavitation erosion and electrochemical corrosion for Ni Al bronze alloys Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Measurement of residual stresses in titanium aerospace components formed via additive manufacturing Published In Materials Science Forum
2014	The controlled short circuit GMAW process: a tutorial Published In Journal of Manufacturing Processes
2012	Investigation on welding arc interruptions in the presence of magnetic fields: Arc length, torch angle and current pulsing frequency influence Published In IEEE Transactions on Plasma Science
2012	Investigation on welding arc interruptions in the presence of magnetic fields: Welding current influence Published In IEEE Transactions on Plasma Science
2011	Preliminary evaluations on laser - Tandem GMAW Published In Welding in the World
2010	Influence of shielding gas on fume formation rate and particle size distribution for optimised GMAW Published In Australasian Welding Journal
2008	Preliminary evaluation of laser-tandem GMAW Published In Australasian Welding Journal

Chapter

Year	Title
2015	Process planning strategy for wire and ARC additive manufacturing Published In Robotic Welding, Intelligence and Automation Publisher Switzerland

Conference Paper

Year	Title
2015	A study of internal structure in components made by additive manufacturing process using 3 D X-ray tomography Published In 41st Annual Review of Progress in quantitative Nondestructive Evaluation
2015	Process planning for robotic wire and arc additive manufacturing Published In Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, ICIEA 2015
2014	Investigation of residual stresses in titanium aerospace components formed via additive manufacturing Published In 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014
2013	Additive manufacture of titanium alloys using integrated robotic GTAW welding Published In International Conference on Joining Materials 17
2013	Characterisation of metal deposition during additive manufacturing of Ti-6Al-4V BY arc-wire methods Published In Twenty Forth Annual International Solid Freeform Fabrication Symposium
2011	Real time monitoring of heat input in manual Exx10 root pass welds Published In Joint Technical Meeting on Pipeline Research
2008	A Flexible Control Program for Research and Development in Tandem GMA Welding Published In International Institute of Welding (IIW) International Congress & 2nd Latin American Welding Congress
2008	Investigations of Tandem GMA Welding Using a Flexible Computer Controlled Power Source System Published In Computer Technology in Welding and Manufacturing Conference
2007	A flexible approach to on-site power filtering and supply backup using high capacity high temperature SMES for maximum equipment utility Published In Australasian Universities Power Engineering Conference

Investigator On

Year	Title
2010	Energy Pipelines CRC Awarded by: NSW Industry & Investment Funding Scheme: NSW Science Leveraging Fund
2009	Compact high voltage superconducting fault current limiter employing a new core architecture and novel magnetic materials Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Projects

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Master of Philosophy - EIS	Process control for WAAM using computer vision

Education And Training

Ph.D., University of Wollongong, Faculty of Informatics 2000
B.E. in Electrical Engineering, University of Wollongong 1988

Awards And Honors

Sir William Hudson Memorial Award, conferred by Welding Technology Institute of Australia, 2006
Sir Wlliam Hudson Memorial Award, conferred by Welding Technology Institute of Australia (WTIA), 2002
Outstanding Young Scientist/Engineer Award, conferred by Manufacturing Co-operative Research Centres, 2001
University Medal, 1988

Located In Facility

Building 2, Room G13

Orcid Id

http://orcid.org/0000-0002-6658-5852 (pending confirmation)

Overview

Research Overview

Publications

Selected Publications

Journal Article

Chapter

Conference Paper

Funding

Investigator On

Supervision

Advisees

Graduate Advising Relationship

Background

Education And Training

Awards And Honors

Contact

Located In Facility

Identity

Orcid Id

Overview

Research Overview

Publications

Selected Publications

Journal Article

Chapter

Conference Paper

Funding

Investigator On

Supervision

Advisees

Graduate Advising Relationship

Background

Education And Training

Awards And Honors

Contact

Located In Facility

Identity

Orcid Id

Visualisations