Lu, Cheng

Top Publications

Year	Title
2011	Crystal plasticity modeling of texture evolution and heterogeneity in equal channel angular pressing of aluminum single crystal Published in Acta Materialia
2012	Study of vacancy-type defects by positron annihilation in ultrafine-grained aluminum severely deformed at room and cryogenic temperatures Published in Acta Materialia
2015	Brittle versus ductile behaviour of nanotwinned copper: A molecular dynamics study Published in Acta Materialia
2015	The shear response of copper bicrystals with Σ11 symmetric and asymmetric tilt grain boundaries by molecular dynamics simulation Published in Nanoscale

Research Overview

- Computational Material Science
- Material Processing Technology
- Fracture modelling and control

Selected Publications

Journal Article

Year	Title
2020	A crystal plasticity FEM study on macro- and micro-subdivision of an aluminium single crystal after multi-pass unidirectional rolling, reverse rolling and accumulative roll-bonding Published In International Journal of Advanced Manufacturing Technology
2020	An improved dynamic stall model and its effect on wind turbine fatigue load prediction Published In Renewable Energy
2020	Atomistic investigation of hydrogen induced decohesion of Ni grain boundaries Published In Mechanics of Materials
2020	Dispersion of carbon dioxide released from buried high-pressure pipeline over complex terrain Published In Environmental Science and Pollution Research
2020	Hydrogen-modified interaction between lattice dislocations and grain boundaries by atomistic modelling Published In International Journal of Hydrogen Energy
2020	Introduction of the delta concept for characterising pipe yield strength Published In International Journal of Material Forming
2020	Microstructure evolution, lattice rotation retardation and grain orientation fragmentation in commercial purity aluminium deformed by high pressure torsion Published In Journal of Materials Research and Technology
2020	Molecular Dynamics Simulation of the Negative Poisson's Ratio in Graphene/Cu Nanolayered Composites: Implications for Scaffold Design and Telecommunication Cables Published In ACS Applied Nano Materials
2020	Roles of microstructure, inclusion, and surface roughness on rolling contact fatigue of a wind turbine gear Published In Fatigue and Fracture of Engineering Materials and Structures
2020	The structural rearrangement with secondary reinforcement in graphene/nanotwinned copper nanocomposites: A molecular dynamics study Published In Composites Part B: Engineering
2020	Understanding and treatment of squat defects in a railway network Published In Wear
2019	A Combined Experiment and Crystal Plasticity FEM Study of Microstructure and Texture in Aluminium Processed by Reverse and Unidirectional Accumulative Roll-Bonding Published In Crystals
2019	A crystal plasticity FEM investigation of a Cu single crystal processed by accumulative roll-bonding Published In Journal of Materials Research and Technology
2019	A crystal plasticity FEM study of through-thickness deformation and texture in a {112} <111> aluminium single crystal during accumulative roll-bonding Published In Scientific Reports
2019	Characterisation of White Etching Layers formed on rails subjected to different traffic conditions Published In Wear
2019	Consequence modelling of CO2 pipeline failure Published In Energy Procedia
2019	Correlation Between Crystal Rotation and Redundant Shear Strain in Rolled Single Crystals: A Crystal Plasticity FE Analysis Published In Acta Metallurgica Sinica (English Letters)
2019	Coupled effects of initial orientation scatter and grain-interaction to texture evolution: a crystal plasticity FE study Published In International Journal of Material Forming
2019	Crystal plasticity modelling of microbands in a rolled aluminium single crystal Published In Materialia
2019	Cyclic transition of deformation in {1 2 3}<6 3 4> single crystal processed by accumulative roll-bonding Published In Materials Science and Technology
2019	Decompression of hydrogen—natural gas mixtures in high-pressure pipelines: CFD modelling using different equations of state Published In International Journal of Hydrogen Energy
2019	Effect of Temperature on Deformation and Fracture Behaviour of Nanostructured Polycrystalline Ni Under Tensile Hydrostatic Stress by Molecular Dynamics Simulation Published In Journal of Nanoscience and Nanotechnology
2019	Effects of H segregation on shear-coupled motion of 〈110〉 grain boundaries in α-fe Published In International Journal of Hydrogen Energy
2019	Evolution of rail surface degradation in the tunnel: The role of water on squat growth under service conditions Published In Engineering Fracture Mechanics
2019	Grain boundary induced deformation mechanisms in nanocrystalline Al by molecular dynamics simulation: From interatomic potential perspective Published In Computational Materials Science
2019	High thermal stability and excellent mechanical properties of ultrafine-grained high-purity copper sheets subjected to asymmetric cryorolling Published In Materials Characterization
2019	Improved dynamic stall prediction of wind turbine airfoils Published In Energy Procedia
2019	Influence of hydrogen environment on dislocation nucleation and fractureresponse of〈110〉grain boundaries in nickel Published In Computational Materials Science
2019	Influence of solute hydrogen on the interaction of screw dislocations with vicinal twin boundaries in nickel Published In Scripta Materialia
2019	Interaction between nano-voids and migrating grain boundary by molecular dynamics simulation Published In Acta Materialia
2019	Investigation of the consequence of high-pressure CO 2 pipeline failure through experimental and numerical studies Published In Applied Energy
2019	Microstructural changes on railway track surfaces caused by electrical leakage between wheel and rail Published In Tribology International
2019	Microstructure and mechanical properties of large-volume gradient-structure aluminium sheets fabricated by cyclic skin-pass rolling Published In Philosophical Magazine
2019	On the Influence of Grain Boundary Misorientation on the Severe Plastic Deformation of Aluminum Bicrystals: A Three-Dimensional Crystal Plasticity Finite Element Method Study Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2019	Pitch bearing/raceway fretting: Influence of contact angle Published In Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science
2019	Texture Modeling of Accumulative Roll-BondingProcessed Aluminum Single Crystal {1 2 3}<634>by Crystal Plasticity FE Published In Advanced Engineering Materials
2019	Texture Stability and Transition in an Accumulative Roll-Bonding-Processed Aluminum Single Crystal Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2019	The negative Poisson's ratio and strengthening mechanism of nanolayered graphene/Cu composites Published In Carbon
2018	A CFD decompression model for CO2 mixture and the influence of non-equilibrium phase transition Published In Applied Energy
2018	A dual fracture transition mechanism in nanotwinned Ni Published In Materials Letters
2018	A new finite element model for multi-cycle accumulative roll-bonding process and experiment verification Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Anisotropy and microstructural evolutions of X70 pipeline steel during tensile deformation Published In Journal of Materials Research
2018	Atomistic Simulation of the Interaction Between Point Defects and Twin Boundary Published In Physica Status Solidi B: Basic Solid State Physics
2018	Calculation analysis of yaw bearings with a hardened raceway Published In International Journal of Mechanical Sciences
2018	Deformation mechanisms and slip-twin interactions in nanotwinned body-centered cubic iron by molecular dynamics simulations Published In Computational Materials Science
2018	Deformation twinning and dislocation processes in nanotwinned copper by molecular dynamics simulations Published In Computational Materials Science
2018	Dynamic interaction between grain boundary and stacking fault tetrahedron Published In Scripta Materialia
2018	Fatigue life analysis of slewing bearings in wind turbines Published In International Journal of Fatigue
2018	Hardened raceway calculation analysis of a three-row roller slewing bearing Published In International Journal of Mechanical Sciences
2018	Improvement in Strength and Ductility of Asymmetric-Cryorolled Copper Sheets Under Low-Temperature Annealing Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018	Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling Published In Philosophical Magazine
2018	Nonlinear elastic response of single crystal Cu under uniaxial loading by molecular dynamics study Published In Materials Letters
2018	Physics-based Constitutive Model for the Hot Deformation of 2Cr11Mo1VNbN Martensitic Stainless Steel Published In Journal of Materials Engineering and Performance
2018	Shear response of grain boundaries with metastable structures by molecular dynamics simulations Published In Modelling and Simulation in Materials Science and Engineering
2018	Thermomechanical simulation of white etching layer formation on rail steel Published In Materials Australia: the magazine of engineering materials technology
2017	A study on the texture evolution mechanism of nickel single crystal deformed by high pressure torsion Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Algae biomass as a precursor for synthesis of nitrogen-and sulfur-co-doped carbon dots: A better probe in Arabidopsis guard cells and root tissues Published In Journal of Photochemistry and Photobiology, B: Biology
2017	Crystal plasticity modeling of texture evolution of aluminum single crystal processed by high pressure torsion Published In Indian Journal of Engineering and Materials Sciences
2017	Decompression Modelling of Pipelines Carrying CO2-N2 Mixture and the Influence of Non-equilibrium Phase Transition Published In Energy Procedia
2017	Deformation mechanisms in nanotwinned copper by molecular dynamics simulation Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Enhanced materials performance of Al/Ti/Al laminate sheets subjected to cryogenic roll bonding Published In Journal of Materials Research
2017	Evaluation of Mechanical Properties of Σ5(210)/[001] Tilt Grain Boundary with Self-Interstitial Atoms by Molecular Dynamics Simulation Published In Journal of Nanomaterials
2017	Evolution of microstructure, temperature and stress in a high speed steel work roll during hot rolling: Experiment and modelling Published In Journal of Materials Processing Technology
2017	Influence of temperature and local structure on the shear-coupled grain boundary migration Published In Physica Status Solidi B: Basic Solid State Physics
2017	Innovative analysis of Luders band behaviour in X80 pipeline steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Investigation of terrain effects on the consequence distance of CO2released from high-pressure pipelines Published In International Journal of Greenhouse Gas Control
2017	Multi-phase decompression modeling of CO2 pipelines Published In Greenhouse Gases: science and technology
2017	Precipitates and Particles Coarsening of 9Cr-1.7W-0.4Mo-Co Ferritic Heat-Resistant Steel after Isothermal Aging Published In Scientific Reports
2017	Progress in indentation study of materials via both experimental and numerical methods Published In Crystals
2017	Squat formation and the occurrence of two distinct classes of white etching layer on the surface of rail steel Published In International Journal of Fatigue
2017	Stacking fault tetrahedron induced plasticity in copper single crystal Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Study of anisotropic plastic behavior in high pressure torsion of aluminum single crystal by crystal plasticity finite element method Published In Crystals
2017	The evolution of microtexture of pipeline steel from strip to bare pipe to coated pipe Published In Procedia Engineering
2017	The formation and destruction of stacking fault tetrahedron in fcc metals: A molecular dynamics study Published In Scripta Materialia
2017	Tower Load Analysis of Offshore Wind Turbines and the Effects of Aerodynamic Damping Published In Energy Procedia
2017	Vibration-induced aerodynamic loads on large horizontal axis wind turbine blades Published In Applied Energy
2016	A dual deformation mechanism of grain boundary at different stress stages Published In Materials Letters
2016	A review on atomistic simulation of grain boundary behaviors in face-centered cubic metals Published In Computational Materials Science
2016	Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Computational fluid dynamics simulation of carbon dioxide dispersion in a complex environment Published In Journal of Loss Prevention in the Process Industries
2016	Coupled grain boundary motion in aluminium: The effect of structural multiplicity Published In Scientific Reports
2016	Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	High temperature processed high Nb X80 steel with excellent heat-affected zone toughness Published In Materials Letters
2016	Improvement of AA5052 sheet properties by electromagnetic twin-roll casting Published In International Journal of Advanced Manufacturing Technology
2016	Microstructure evolution of accumulative roll bonding processed pure aluminum during cryorolling Published In Journal of Materials Research
2016	Residual Stress Study of Al/Al Laminates Processed by Accumulative Roll Bonding Published In Materials Research Proceedings
2016	Simultaneous grain growth and grain refinement in bulk ultrafine-grained copper under tensile deformation at room temperature Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: a review Published In Advanced Engineering Materials
2016	Strengthening mechanisms and dislocation processes in <111> textured nanotwinned copper Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Superstrength of nanograined steel with nanoscale intermetallic precipitates transformed from shock-compressed martensitic steel Published In Scientific Reports
2016	Tension/compression asymmetry of grain boundaries with non-planar structure Published In Materials Research Express
2016	Transverse and z-direction CVN impact tests of X65 line pipe steels of two centerline segregation ratings Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2015	A combined experimental-numerical approach for determining mechanical properties of aluminum subjects to nanoindentation Published In Scientific Reports
2015	A new insight into ductile fracture of ultrafine-grained Al-Mg alloys Published In Scientific Reports
2015	Brittle versus ductile behaviour of nanotwinned copper: A molecular dynamics study Published In Acta Materialia
2015	Brittle versus ductile fracture behaviour in nanotwinned FCC crystals Published In Materials Letters
2015	Crystal plasticity FEM study of nanoindentation behaviors of Cu bicrystals and Cu–Al bicrystals Published In Journal of Materials Research
2015	Crystal plasticity finite element method modelling of indentation size effect Published In International Journal of Solids and Structures
2015	Decompression wave speed in CO2 mixtures: CFD modelling with the GERG-2008 equation of state Published In Applied Energy
2015	Ductile-to-brittle fracture transition in polycrystalline nickel under tensile hydrostatic stress Published In Computational Materials Science
2015	High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2015	Influence of loading conditions during tensile testing on acoustic emission Published In Key Engineering Materials
2015	Influence of the vibration of large-scale wind turbine blade on the aerodynamic load Published In Energy Procedia
2015	Investigation of X70 line pipe steel fracture during single edge-notched tensile testing using acoustic emission monitoring Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2015	Molecular dynamics simulation on generalized stacking fault energies of FCC metals under preloading stress Published In Acta Physica Sinica
2015	Molecular dynamics study on the grain boundary dislocation source in nanocrystalline copper under tensile loading Published In Materials Research Express
2015	Nanomechanical properties of TiCN and TiCN/Ti coatings on Ti prepared by Filtered Arc Deposition Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2015	Optimisation of dispersion parameters of Gaussian plume model for CO2 dispersion Published In Environmental Science and Pollution Research
2015	Optimization of process parameters in twin-roll strip casting of an AZ61 alloy by experiments and simulations Published In International Journal of Advanced Manufacturing Technology
2015	Study of the consequences of CO2 released from high-pressure pipelines Published In Atmospheric Environment
2015	The determination of self hardening parameters of twinning induced plasticity steel via crystal plasticity modeling Published In Journal of Computational and Theoretical Nanoscience
2015	The shear response of copper bicrystals with Σ11 symmetric and asymmetric tilt grain boundaries by molecular dynamics simulation Published In Nanoscale
2014	A crystal plasticity study of the effect of friction on the evolution of texture and mechanical behaviour in the nano-indentation of an aluminium single crystal Published In Computational Materials Science
2014	A deformation mechanism of hard metal surrounded by soft metal during roll forming Published In Scientific Reports
2014	A misorientation dependent criterion of crack opening in FCC single crystal Published In Materials Science Forum
2014	A study of plastic deformation behavior during high pressure torsion process by crystal plasticity finite element simulation Published In IOP Conference Series: Materials Science and Engineering
2014	Abnormal ductility increase of commercial purity Al during accumulative roll bonding Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Abnormally high residual dislocation density in pure aluminum after Al/Ti/Al laminate annealing for seven days Published In Philosophical Magazine Letters: structure and properties of condensed matter
2014	Advanced rolling technologies for producing ultra-finegrain/nanostructured alloys Published In Procedia Engineering
2014	An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Atomistic simulation of tensile deformation behavior of Σ5 tilt grain boundaries in copper bicrystal Published In Scientific Reports
2014	Deformation behavior and wear resistance of hard TiCN and TiCN/Ti coatings on Ti6Al4V alloy Published In Advanced Materials Research
2014	Editorial Published In Computational Materials Science
2014	Effect of stress state on deformation and fracture of nanocrystalline copper: molecular dynamics simulation Published In Acta Physica Sinica
2014	Fabrication of nanostructured aluminum sheets using four-layer accumulative roll bonding Published In Materials and Manufacturing Processes
2014	Fatigue analysis of a motorcycle frame system based on a road test and the finite element method Published In Materials Science Forum
2014	Grain refinement in the formability of aluminium thin cup Published In Materials Science Forum
2014	Influence of cold rolling reduction on the deformation behaviour and crystallographic orientation development Published In Computational Materials Science
2014	Influence of outer corner angle (OCA) on the plastic deformation and texture evolution in equal channel angular pressing Published In Computational Materials Science
2014	Investigation of closure of internal cracks during rolling by FE model considering crack surface roughness Published In International Journal of Advanced Manufacturing Technology
2014	Investigation of ultrafine grained AA1050 fabricated by accumulative roll bonding Published In Journal of Materials Science and Engineering A
2014	Microstructural evolution and mechanical property of AA5050 alloy deformed by accumulative roll bonding Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Microstructure and mechanical properties of AA5005/AA6061 laminated composite processed by accumulative roll bonding Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Molecular dynamics simulation of the grain boundary sliding behaviour for Al Σ5 (2 1 0) Published In Computational Materials Science
2014	Molecular dynamics simulation on Σ5 grain boundaries of copper bicrystal under tensile and shear deformation Published In MRS Proceedings
2014	Molecular dynamics study on the atomic mechanisms of coupling motion of [0 0 1] symmetric tilt grain boundaries in copper bicrystal Published In Materials Research Express
2014	Multiscale model of elastic nanocontacts Published In Computational Materials Science
2014	Numerical comparison between Berkovich and conical nano-indentations: mechanical behaviour and micro-texture evolution Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2014	On the influence of mesh size during finite element simulation of equal channel angular pressing Published In Materials Science Forum
2014	Optimization and application of process parameters in an AZ61 alloy twin-roll strip casting Published In Materials Science Forum
2014	Response of the al Σ5 〈001〉 left {310} symmetric tilt grain boundary to the shear deformation simulated by molecular dynamics Published In Science of Advanced Materials
2014	Shear texture gradient in AA6061 aluminum alloy processed by accumulative roll bonding with high roll roughness Published In Journal of Alloys and Compounds
2014	Source strength and dispersion of CO2 releases from high-pressure pipelines: CFD model using real gas equation of state Published In Applied Energy
2014	Tensile fracture of ultrafine grained aluminum 6061 sheets by asymmetric cryorolling for microforming Published In International Journal of Damage Mechanics
2014	The mechanical behaviour of TiN and multi-layered coating of TiN/Ti on Ti6Al4V substrate during nano-indentation Published In International Journal of Surface Science and Engineering
2014	Vacancy-type defects study on ultra-fine grained aluminium processed by severe plastic deformation Published In Science of Advanced Materials
2013	A micro deep drawing of ARB processed aluminium foil AA1235 Published In International Journal of Materials and Product Technology
2013	A molecular dynamics simulation of fracture in nanocrystalline copper Published In Journal of Nano Research
2013	A study on the aluminum alloy AA1050 severely deformed by non-equal channel angular pressing Published In Advanced Materials Research
2013	An insight into the deformation and orientation development of severely plastic deformed aluminum Published In AIP Conference Proceedings
2013	Annealing behavior of accumulative roll bonding processed aluminum composites Published In Steel Research International
2013	Crystal plasticity FEM study on the influence of crystallographic orientation in copper single crystals subjected to equal channel angular pressing Published In Steel Research International
2013	Crystal plasticity study of the effect of the initial orientation on the indentation surface profile patterns and micro-textures of aluminum single crystal Published In Steel Research International
2013	Editorial Published In Materials Research Innovations
2013	Effect of pre-heating on the microstructural evolution and super-plasticity of Al deformed by accumulative roll bonding Published In Steel Research International
2013	Fabrication of ultra-thin nanostructured bimetallic foils by Accumulative Roll Bonding and Asymmetric Rolling Published In Scientific Reports
2013	Finite element analysis of high pressure torsion Published In Steel Research International
2013	Influences of magnetic annealing on the grain growth in a cryoECAPed 1050 aluminum alloy Published In Materials Characterization
2013	Investigation of deformation behavior during cold rolling cladding process of four-layer composite aluminum alloys Published In Advanced Materials Research
2013	Investigation of sample size effect on the deformation heterogeneity and texture development during equal channel angular pressing Published In Computational Materials Science
2013	Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2013	Microstructure and mechanical properties of 1050/6061 laminated composite processed by accumulative roll bonding Published In Reviews On Advanced Materials Science
2013	Occurrence of surface defects on strips during hot rolling process by FEM Published In International Journal of Advanced Manufacturing Technology
2013	Surface temperature difference for analysis of distortion of heavy weak-rigidity castings during heat treatment Published In Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture
2013	The wave motion of the rolling force during variable gauge rolling Published In Steel Research International
2013	Ultrafine grained AA1050/AA6061 composite produced by accumulative roll bonding Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2012	A numerical model for simulation of crack initiation around inclusion under tensile load Published In Journal of Computational and Theoretical Nanoscience
2012	Asymmetric cryorolling for fabrication of nanostructural aluminum sheets Published In Scientific Reports
2012	Crystal plasticity investigation of texture evolution of Al single crystal during extrusion through a bent channel Published In Journal of Computational and Theoretical Nanoscience
2012	Modeling texture evolution during ECAP of copper single crystal by crystal plasticity FEM Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2012	Optimization of cushion conditions in micro multi-point sheet forming Published In Journal of Materials Processing Technology
2012	Study of vacancy-type defects by positron annihilation in ultrafine-grained aluminum severely deformed at room and cryogenic temperatures Published In Acta Materialia
2011	An investigation into the tribological behaviour of a work roll material at high temperature Published In Wear
2011	Crystal plasticity modeling of texture evolution and heterogeneity in equal channel angular pressing of aluminum single crystal Published In Acta Materialia
2011	Size effect in micro multi-point sheet forming Published In Advanced Science Letters
2011	Vacancy-assisted hardening in nanostructured metals Published In Materials Letters
2010	A modelling of tensile deformation around the notch tip in single crystal aluminium Published In Computational Materials Science
2010	Crystal plasticity investigation of friction effect on texture evolution of al single crystal during ecap Published In Journal of Materials Science
2010	Effect of Mg/B ratio on the superconductivity of MgB2 bulk with SiC addition Published In Physical Review B: Condensed Matter and Materials Physics
2010	Optimization of short stroke control curve in hot strip mill by FEM modelling Published In Advanced Materials Research
2010	Optimization of short stroke control preset for automatic width control of hot rolling mill Published In Journal of Iron and Steel Research International
2009	Atomic-scale anisotropy of nanoscratch behavior of single crystal iron Published In Wear
2009	Atomistic simulation of nanoindentation of iron with different indenter shapes Published In Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology
2009	Effect of sintering time on superconductivity in MgB2 Published In International Journal of Modern Physics B
2009	Experimental study of the effects of rough texture on surface deformation during cold metal forming Published In Wear
2009	Influence of force-based crosstalk on the 'wedge method' in lateral force microscopy Published In Measurement Science and Technology
2009	Influence of heat treatment on superconductivity of MgB2 bulk sintered in flowing welding grade ar atmosphere Published In IEEE Transactions on Magnetics
2009	Influence of nanocrystalline boron precursor powder on superconductivity in MgB2 bulk Published In Journal of Nanoscience and Nanotechnology
2009	Molecular dynamics simulation of effect of indenter shape on nanoscratch of Ni Published In Wear
2009	Optimization of nominal mixing ratio of Mg to B in fabrication of magnesium diboride bulk Published In IEEE Transactions on Applied Superconductivity
2009	Polycrystal geometry modeling of crystal plasticity finite element method with voronoi diagram Published In Cailiao yu Yejin Xuebao/Journal of Materials and Metallurgy
2009	Significant enhancement of bond strength in the accumulative roll bonding process using nano-sized SiO2 particles Published In Journal of Materials Processing Technology
2009	The effect of carbon doping on the upper critical field (Hc2) and resistivity of MgB2 by using sucrose (C12H22O11) as the carbon source Published In Superconductor Science and Technology
2008	A Mathematical Model for the Prediction of Ridge Deformation in Cold Rolling Published In Steel Research International
2008	A Study of Crack Propagation in BCC Iron by Molecular Dynamics Method Published In Key Engineering Materials
2008	A study of microstructural evolution around crack tip using crystal plasticity finite-element method Published In Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology
2008	An orientation-dependent failure criterion for FCC crystals Published In Key Engineering Materials
2008	Atomic simulation of effect of stacking fault and dislocation on fracture behaviour in Fe crystal Published In Key Engineering Materials
2008	Effect of surface texture on deformation behavior of asperity in cold metal forming Published In Advanced Materials Research
2008	Experimental and theoretical investigation of the asperity flattening process under large bulk strain Published In Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology
2008	Modeling of Heterogeneous tensile deformation of Polyscrystalline Aluminum Published In Steel Research International
2008	Numerical investigation of strip deformation behavior between stands of hot finishing mill Published In Steel Research International
2008	Significant improvement of Jc in MgB2 bulk superconductor using ball-milled high-purity crystalline boron Published In Superconductor Science and Technology
2008	Simulation of rolling behaviour of cubic oriented al single crystal with crystal plasticity FEM Published In Journal of Materials Processing Technology
2008	System modelling of a lateral force microscope Published In Nanotechnology
2007	Measurement of the forward slip in cold strip rolling using a high speed digital camera Published In Journal of Mechanical Science and Technology
2007	Molecular dynamics simulation about porous thin-film growth in secondary deposition Published In Applied Surface Science
2007	Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method Published In Nonferrous Metals Society of China Transactions
2007	Surface roughness transformation and deformation of the scale of hot rolling Published In International Journal of Surface Science and Engineering

Conference Paper

Year	Title
2019	A comprehensive approach to control and minimize squat efects in a railway network Published In Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018
2019	Structural and microstructural investigation of two distinct classes of white etching layer formation on the rail surface Published In Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018
2018	CO2SAFE-ARREST: A full-scale burst test research program for carbon dioxide pipelines - Part 2: Is the BTCM out of touch with dense-phase CO2? Published In 2018 12th International Pipeline Conference
2018	CO2Safe-Arrest: A full-scale burst test research program for carbon dioxide pipelines - Part 3: Dispersion modelling Published In 2018 12th International Pipeline Conference: IPC2018: Volume 2: Pipeline Safety Management Systems; Project Management, Design, Construction, and Environmental Issues; Strain Based Design; Risk and Reliability; Northern Offshore and Production Pipelines
2014	Atomistic simulation on the structure and mechanical response of Σ3, Σ5 tilt grain boundaries under tension Published In TMS2014 143rd Annual Meeting & Exhibition: Annual Meeting Supplemental Proceedings
2014	Automatic measurement of Centreline segregation in continuously cast line pipe steel slabs Published In Energy Materials 2014, Conference Proceedings
2014	Crystal plasticity FEM study of the effects of BW hardening model parameters on nano-indentation deformation behaviour of copper single crystal Published In TMS2014 143rd Annual Meeting & Exhibition: Annual Meeting Supplemental Proceedings
2014	Influence factors for brittle-to-ductile transition in twinned copper Published In TMS2014 143rd Annual Meeting & Exhibition: Annual Meeting Supplemental Proceedings
2014	Re-examination of battelle two curve method Published In 2014 10th International Pipeline Conference: Volume 3: Materials and Joining; Risk and Reliability
2014	Venting of a 32 km NG pipeline - Field measurements and CFD simulations Published In 2014 10th International Pipeline Conference: Volume 1: Design and Construction; Environment; Pipeline Automation and Measurement
2013	Recent developments in flat rolling technologies Published In PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing
2013	Simulation of defects in micro-deep drawing of an aluminium alloy foil Published In The 11th International Conference on Numerical Methods in Industrial Forming Processes
2013	Transition of ductile and brittle fracture during DWTT by FEM Published In 13th International Conference on Fracture (ICF)
2013	Two-dimensional CFD modelling of gas-decompression behaviour Published In The 6th International Pipeline Technology Conference
2012	Crystal plasticity finite element analysis of influence of initial crystal orientation on texture evolution and deformation heterogeneity of cold-rolled aluminium Published In Proceedings of the 14th International Conference of Metal Forming
2012	Deformation mechanism in nanoindentation of Ti 63.375Fe 34.125Sn 2.5 alloy Published In 141st Annual Meeting and Exhibition, TMS 2012
2012	Fracture behaviours of TiN and TiN/Ti multilayer coatings on Ti substrate during nanoindentation Published In 141st Annual Meeting and Exhibition, TMS 2012
2012	Investigation of the effects of pipe wall roughness and pipe diameter on the decompression wave speed in natural gas pipelines Published In 9th International Pipeline Conference, Volume 3: Materials and Joining
2012	Mechanical behaviours of TiN and TiN/Ti multilayer coating on Ti6Al4V substrate during nanoindentation Published In 15th International Conference on Advances in Materials & Processing Technologies
2012	The 'Eckert number phenomenon' in pipeline decompression Published In Proceedings of the Biennial International Pipeline Conference, IPC
2012	Tracing of macrosegregation ring in slab during bar rough rolling using FEM Published In 14th International Conference of Metal Forming
2012	Wave motion of rolling force in variable gauge rolling process Published In 15th International Conference on Advances in Materials & Processing Technologies
2010	Development of an optimum pass schedule setup for strip shape quality in hot strip rolling Published In Proceedings of the 10th International Conference on Steel Rolling
2010	Effect of nano-sized particles on bond strength in accumulative roll bonding Published In 2010 3rd International Conference on Nanoscience and Nanotechnology, ICONN 2010
2010	Tribological characterization of a high speed steel roll material at elevated temperature Published In Proceedings of the 10th International Conference on Steel Rolling
2009	Experiment and molecular dynamics simulation of nanoindentation of body centered cubic iron Published In 2nd International Conference on Nanoscale Materials and Engineering
2009	Molecular dynamic simulation of effect of crystallographic orientation on nano-indentation/scratching behaviors of BCC iron Published In 5th China International Symposium on Tribology/1st International Tribology Symposium of IFToMM
2008	3D misorientation of cantilevers and its impact in friction force microscopy Published In China International Symposium on Tribology
2008	Effect of high spot in hot rolled coil on ridge-buckle defect in cold rolled strip Published In Symposium on Advanced Structural Steels and New Rolling Technologies
2008	Effects of sintering temperature on the superconductivity of MgB2 made with high-purity crystalline B precursor Published In 22nd International Cryogenic Engineering Conference 2008
2008	Molecular dynamic simulation of effect of crystallographic orientation on nano-indentation/scratching behaviors of BCC iron Published In Fifth China International Symposium on Tribology (CIST 2008)
2008	Molecular dynamics simulation of crack propagation on different slip planes of BCC iron Published In International Conference On Nanoscience and Nanotechnology
2008	Oxidation of type 304 stainless steel under simulated reheating conditions Published In Baosteel Academic Conference
2008	Ridge and ridge-buckle defects in cold rolling Published In Baosteel Biennial Academic Conference
2007	A study of plastic deformation about crack tip using crystal plasticity finite element method Published In 34th Leeds-Lyon Symposium on Tribology
2007	Atomic simulation of effect of dislocation on crack propagation in FCC metals Published In 34th Leeds-Lyon Symposium on Tribology
2007	Experimental and theoretical investigation of asperity flattening process under large bulk strain Published In 34th Leeds-Lyon Symposium on Tribology
2007	Numerical determination of lateral frictional force in atomic friction microscope Published In 34th Leeds-Lyon Symposium on Tribology

Investigator On

Year	Title
2020 - 2023	Analysis and solutions of pipeline girth weld failure under the longitudinal stress due to strength mis-matching Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
2017	Large-volume gradient materials: manufacturing and deformation mechanism Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2012	Joint processing facility for the production of far-from-equilibrium alloy structures Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2011	Lubrication mechanism in hot strip rolling Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2010	Energy Pipelines CRC Awarded by: NSW Industry & Investment Funding Scheme: NSW Science Leveraging Fund
	A Physical-based abrasive wear model for high-speed steel at high temperature Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
	Improving the weld HAZ toughness of high strength thick walled line pipe Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
	In-situ straining scanning electron microscope facility for nanomaterials Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
	Significance, measurement and control of centreline segregation in continuously cast line pipe steels Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
	Strain ageing in fusion-bonded epoxy coated pipeline steel Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	Acoustic Propagation Variation with Temperature Profile in Water Filled Steel Pipes at Pressure	Hough, John
Doctor of Philosophy	Atomistic Simulation of Hydrogen Embrittlement of Grain Boundaries in Metals	Li, Jiaqing
Doctor of Philosophy	An investigation of the mechanical properties and deformation of graphene/metal composites by molecular dynamic simulations	Zhang, Che
Doctor of Philosophy (Integrated)	Texture Evolution and Mechanical Properties of Aluminium Alloy by Accumulative Roll Bonding	Wang, Rui
Doctor of Philosophy	Application of Molecular Dynamics Simulation for Hydrogen Embrittlement of Metals	Zhang, Zehan
Doctor of Philosophy	Development of a Numerical Model to Predict the Capacity of a Pipeline to Transport High-Pressure Hydrogen Gas	Uddin, Tariq
Doctor of Philosophy	High temperature lubricant for hot rolling of steel	Huynh, Khai

Located In Facility

Building 8, Room 101

Orcid Id

http://orcid.org/0000-0003-2922-6962 (confirmed)

Top Publications

Year	Title
2011	Crystal plasticity modeling of texture evolution and heterogeneity in equal channel angular pressing of aluminum single crystal Published in Acta Materialia
2012	Study of vacancy-type defects by positron annihilation in ultrafine-grained aluminum severely deformed at room and cryogenic temperatures Published in Acta Materialia
2015	Brittle versus ductile behaviour of nanotwinned copper: A molecular dynamics study Published in Acta Materialia
2015	The shear response of copper bicrystals with Σ11 symmetric and asymmetric tilt grain boundaries by molecular dynamics simulation Published in Nanoscale

Research Overview

- Computational Material Science
- Material Processing Technology
- Fracture modelling and control

Selected Publications

Journal Article

Year	Title
2020	A crystal plasticity FEM study on macro- and micro-subdivision of an aluminium single crystal after multi-pass unidirectional rolling, reverse rolling and accumulative roll-bonding Published In International Journal of Advanced Manufacturing Technology
2020	An improved dynamic stall model and its effect on wind turbine fatigue load prediction Published In Renewable Energy
2020	Atomistic investigation of hydrogen induced decohesion of Ni grain boundaries Published In Mechanics of Materials
2020	Dispersion of carbon dioxide released from buried high-pressure pipeline over complex terrain Published In Environmental Science and Pollution Research
2020	Hydrogen-modified interaction between lattice dislocations and grain boundaries by atomistic modelling Published In International Journal of Hydrogen Energy
2020	Introduction of the delta concept for characterising pipe yield strength Published In International Journal of Material Forming
2020	Microstructure evolution, lattice rotation retardation and grain orientation fragmentation in commercial purity aluminium deformed by high pressure torsion Published In Journal of Materials Research and Technology
2020	Molecular Dynamics Simulation of the Negative Poisson's Ratio in Graphene/Cu Nanolayered Composites: Implications for Scaffold Design and Telecommunication Cables Published In ACS Applied Nano Materials
2020	Roles of microstructure, inclusion, and surface roughness on rolling contact fatigue of a wind turbine gear Published In Fatigue and Fracture of Engineering Materials and Structures
2020	The structural rearrangement with secondary reinforcement in graphene/nanotwinned copper nanocomposites: A molecular dynamics study Published In Composites Part B: Engineering
2020	Understanding and treatment of squat defects in a railway network Published In Wear
2019	A Combined Experiment and Crystal Plasticity FEM Study of Microstructure and Texture in Aluminium Processed by Reverse and Unidirectional Accumulative Roll-Bonding Published In Crystals
2019	A crystal plasticity FEM investigation of a Cu single crystal processed by accumulative roll-bonding Published In Journal of Materials Research and Technology
2019	A crystal plasticity FEM study of through-thickness deformation and texture in a {112} <111> aluminium single crystal during accumulative roll-bonding Published In Scientific Reports
2019	Characterisation of White Etching Layers formed on rails subjected to different traffic conditions Published In Wear
2019	Consequence modelling of CO2 pipeline failure Published In Energy Procedia
2019	Correlation Between Crystal Rotation and Redundant Shear Strain in Rolled Single Crystals: A Crystal Plasticity FE Analysis Published In Acta Metallurgica Sinica (English Letters)
2019	Coupled effects of initial orientation scatter and grain-interaction to texture evolution: a crystal plasticity FE study Published In International Journal of Material Forming
2019	Crystal plasticity modelling of microbands in a rolled aluminium single crystal Published In Materialia
2019	Cyclic transition of deformation in {1 2 3}<6 3 4> single crystal processed by accumulative roll-bonding Published In Materials Science and Technology
2019	Decompression of hydrogen—natural gas mixtures in high-pressure pipelines: CFD modelling using different equations of state Published In International Journal of Hydrogen Energy
2019	Effect of Temperature on Deformation and Fracture Behaviour of Nanostructured Polycrystalline Ni Under Tensile Hydrostatic Stress by Molecular Dynamics Simulation Published In Journal of Nanoscience and Nanotechnology
2019	Effects of H segregation on shear-coupled motion of 〈110〉 grain boundaries in α-fe Published In International Journal of Hydrogen Energy
2019	Evolution of rail surface degradation in the tunnel: The role of water on squat growth under service conditions Published In Engineering Fracture Mechanics
2019	Grain boundary induced deformation mechanisms in nanocrystalline Al by molecular dynamics simulation: From interatomic potential perspective Published In Computational Materials Science
2019	High thermal stability and excellent mechanical properties of ultrafine-grained high-purity copper sheets subjected to asymmetric cryorolling Published In Materials Characterization
2019	Improved dynamic stall prediction of wind turbine airfoils Published In Energy Procedia
2019	Influence of hydrogen environment on dislocation nucleation and fractureresponse of〈110〉grain boundaries in nickel Published In Computational Materials Science
2019	Influence of solute hydrogen on the interaction of screw dislocations with vicinal twin boundaries in nickel Published In Scripta Materialia
2019	Interaction between nano-voids and migrating grain boundary by molecular dynamics simulation Published In Acta Materialia
2019	Investigation of the consequence of high-pressure CO 2 pipeline failure through experimental and numerical studies Published In Applied Energy
2019	Microstructural changes on railway track surfaces caused by electrical leakage between wheel and rail Published In Tribology International
2019	Microstructure and mechanical properties of large-volume gradient-structure aluminium sheets fabricated by cyclic skin-pass rolling Published In Philosophical Magazine
2019	On the Influence of Grain Boundary Misorientation on the Severe Plastic Deformation of Aluminum Bicrystals: A Three-Dimensional Crystal Plasticity Finite Element Method Study Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2019	Pitch bearing/raceway fretting: Influence of contact angle Published In Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science
2019	Texture Modeling of Accumulative Roll-BondingProcessed Aluminum Single Crystal {1 2 3}<634>by Crystal Plasticity FE Published In Advanced Engineering Materials
2019	Texture Stability and Transition in an Accumulative Roll-Bonding-Processed Aluminum Single Crystal Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2019	The negative Poisson's ratio and strengthening mechanism of nanolayered graphene/Cu composites Published In Carbon
2018	A CFD decompression model for CO2 mixture and the influence of non-equilibrium phase transition Published In Applied Energy
2018	A dual fracture transition mechanism in nanotwinned Ni Published In Materials Letters
2018	A new finite element model for multi-cycle accumulative roll-bonding process and experiment verification Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Anisotropy and microstructural evolutions of X70 pipeline steel during tensile deformation Published In Journal of Materials Research
2018	Atomistic Simulation of the Interaction Between Point Defects and Twin Boundary Published In Physica Status Solidi B: Basic Solid State Physics
2018	Calculation analysis of yaw bearings with a hardened raceway Published In International Journal of Mechanical Sciences
2018	Deformation mechanisms and slip-twin interactions in nanotwinned body-centered cubic iron by molecular dynamics simulations Published In Computational Materials Science
2018	Deformation twinning and dislocation processes in nanotwinned copper by molecular dynamics simulations Published In Computational Materials Science
2018	Dynamic interaction between grain boundary and stacking fault tetrahedron Published In Scripta Materialia
2018	Fatigue life analysis of slewing bearings in wind turbines Published In International Journal of Fatigue
2018	Hardened raceway calculation analysis of a three-row roller slewing bearing Published In International Journal of Mechanical Sciences
2018	Improvement in Strength and Ductility of Asymmetric-Cryorolled Copper Sheets Under Low-Temperature Annealing Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018	Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling Published In Philosophical Magazine
2018	Nonlinear elastic response of single crystal Cu under uniaxial loading by molecular dynamics study Published In Materials Letters
2018	Physics-based Constitutive Model for the Hot Deformation of 2Cr11Mo1VNbN Martensitic Stainless Steel Published In Journal of Materials Engineering and Performance
2018	Shear response of grain boundaries with metastable structures by molecular dynamics simulations Published In Modelling and Simulation in Materials Science and Engineering
2018	Thermomechanical simulation of white etching layer formation on rail steel Published In Materials Australia: the magazine of engineering materials technology
2017	A study on the texture evolution mechanism of nickel single crystal deformed by high pressure torsion Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Algae biomass as a precursor for synthesis of nitrogen-and sulfur-co-doped carbon dots: A better probe in Arabidopsis guard cells and root tissues Published In Journal of Photochemistry and Photobiology, B: Biology
2017	Crystal plasticity modeling of texture evolution of aluminum single crystal processed by high pressure torsion Published In Indian Journal of Engineering and Materials Sciences
2017	Decompression Modelling of Pipelines Carrying CO2-N2 Mixture and the Influence of Non-equilibrium Phase Transition Published In Energy Procedia
2017	Deformation mechanisms in nanotwinned copper by molecular dynamics simulation Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Enhanced materials performance of Al/Ti/Al laminate sheets subjected to cryogenic roll bonding Published In Journal of Materials Research
2017	Evaluation of Mechanical Properties of Σ5(210)/[001] Tilt Grain Boundary with Self-Interstitial Atoms by Molecular Dynamics Simulation Published In Journal of Nanomaterials
2017	Evolution of microstructure, temperature and stress in a high speed steel work roll during hot rolling: Experiment and modelling Published In Journal of Materials Processing Technology
2017	Influence of temperature and local structure on the shear-coupled grain boundary migration Published In Physica Status Solidi B: Basic Solid State Physics
2017	Innovative analysis of Luders band behaviour in X80 pipeline steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Investigation of terrain effects on the consequence distance of CO2released from high-pressure pipelines Published In International Journal of Greenhouse Gas Control
2017	Multi-phase decompression modeling of CO2 pipelines Published In Greenhouse Gases: science and technology
2017	Precipitates and Particles Coarsening of 9Cr-1.7W-0.4Mo-Co Ferritic Heat-Resistant Steel after Isothermal Aging Published In Scientific Reports
2017	Progress in indentation study of materials via both experimental and numerical methods Published In Crystals
2017	Squat formation and the occurrence of two distinct classes of white etching layer on the surface of rail steel Published In International Journal of Fatigue
2017	Stacking fault tetrahedron induced plasticity in copper single crystal Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2017	Study of anisotropic plastic behavior in high pressure torsion of aluminum single crystal by crystal plasticity finite element method Published In Crystals
2017	The evolution of microtexture of pipeline steel from strip to bare pipe to coated pipe Published In Procedia Engineering
2017	The formation and destruction of stacking fault tetrahedron in fcc metals: A molecular dynamics study Published In Scripta Materialia
2017	Tower Load Analysis of Offshore Wind Turbines and the Effects of Aerodynamic Damping Published In Energy Procedia
2017	Vibration-induced aerodynamic loads on large horizontal axis wind turbine blades Published In Applied Energy
2016	A dual deformation mechanism of grain boundary at different stress stages Published In Materials Letters
2016	A review on atomistic simulation of grain boundary behaviors in face-centered cubic metals Published In Computational Materials Science
2016	Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Computational fluid dynamics simulation of carbon dioxide dispersion in a complex environment Published In Journal of Loss Prevention in the Process Industries
2016	Coupled grain boundary motion in aluminium: The effect of structural multiplicity Published In Scientific Reports
2016	Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	High temperature processed high Nb X80 steel with excellent heat-affected zone toughness Published In Materials Letters
2016	Improvement of AA5052 sheet properties by electromagnetic twin-roll casting Published In International Journal of Advanced Manufacturing Technology
2016	Microstructure evolution of accumulative roll bonding processed pure aluminum during cryorolling Published In Journal of Materials Research
2016	Residual Stress Study of Al/Al Laminates Processed by Accumulative Roll Bonding Published In Materials Research Proceedings
2016	Simultaneous grain growth and grain refinement in bulk ultrafine-grained copper under tensile deformation at room temperature Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: a review Published In Advanced Engineering Materials
2016	Strengthening mechanisms and dislocation processes in <111> textured nanotwinned copper Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Superstrength of nanograined steel with nanoscale intermetallic precipitates transformed from shock-compressed martensitic steel Published In Scientific Reports
2016	Tension/compression asymmetry of grain boundaries with non-planar structure Published In Materials Research Express
2016	Transverse and z-direction CVN impact tests of X65 line pipe steels of two centerline segregation ratings Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2015	A combined experimental-numerical approach for determining mechanical properties of aluminum subjects to nanoindentation Published In Scientific Reports
2015	A new insight into ductile fracture of ultrafine-grained Al-Mg alloys Published In Scientific Reports
2015	Brittle versus ductile behaviour of nanotwinned copper: A molecular dynamics study Published In Acta Materialia
2015	Brittle versus ductile fracture behaviour in nanotwinned FCC crystals Published In Materials Letters
2015	Crystal plasticity FEM study of nanoindentation behaviors of Cu bicrystals and Cu–Al bicrystals Published In Journal of Materials Research
2015	Crystal plasticity finite element method modelling of indentation size effect Published In International Journal of Solids and Structures
2015	Decompression wave speed in CO2 mixtures: CFD modelling with the GERG-2008 equation of state Published In Applied Energy
2015	Ductile-to-brittle fracture transition in polycrystalline nickel under tensile hydrostatic stress Published In Computational Materials Science
2015	High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2015	Influence of loading conditions during tensile testing on acoustic emission Published In Key Engineering Materials
2015	Influence of the vibration of large-scale wind turbine blade on the aerodynamic load Published In Energy Procedia
2015	Investigation of X70 line pipe steel fracture during single edge-notched tensile testing using acoustic emission monitoring Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2015	Molecular dynamics simulation on generalized stacking fault energies of FCC metals under preloading stress Published In Acta Physica Sinica
2015	Molecular dynamics study on the grain boundary dislocation source in nanocrystalline copper under tensile loading Published In Materials Research Express
2015	Nanomechanical properties of TiCN and TiCN/Ti coatings on Ti prepared by Filtered Arc Deposition Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2015	Optimisation of dispersion parameters of Gaussian plume model for CO2 dispersion Published In Environmental Science and Pollution Research
2015	Optimization of process parameters in twin-roll strip casting of an AZ61 alloy by experiments and simulations Published In International Journal of Advanced Manufacturing Technology
2015	Study of the consequences of CO2 released from high-pressure pipelines Published In Atmospheric Environment
2015	The determination of self hardening parameters of twinning induced plasticity steel via crystal plasticity modeling Published In Journal of Computational and Theoretical Nanoscience
2015	The shear response of copper bicrystals with Σ11 symmetric and asymmetric tilt grain boundaries by molecular dynamics simulation Published In Nanoscale
2014	A crystal plasticity study of the effect of friction on the evolution of texture and mechanical behaviour in the nano-indentation of an aluminium single crystal Published In Computational Materials Science
2014	A deformation mechanism of hard metal surrounded by soft metal during roll forming Published In Scientific Reports
2014	A misorientation dependent criterion of crack opening in FCC single crystal Published In Materials Science Forum
2014	A study of plastic deformation behavior during high pressure torsion process by crystal plasticity finite element simulation Published In IOP Conference Series: Materials Science and Engineering
2014	Abnormal ductility increase of commercial purity Al during accumulative roll bonding Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Abnormally high residual dislocation density in pure aluminum after Al/Ti/Al laminate annealing for seven days Published In Philosophical Magazine Letters: structure and properties of condensed matter
2014	Advanced rolling technologies for producing ultra-finegrain/nanostructured alloys Published In Procedia Engineering
2014	An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Atomistic simulation of tensile deformation behavior of Σ5 tilt grain boundaries in copper bicrystal Published In Scientific Reports
2014	Deformation behavior and wear resistance of hard TiCN and TiCN/Ti coatings on Ti6Al4V alloy Published In Advanced Materials Research
2014	Editorial Published In Computational Materials Science
2014	Effect of stress state on deformation and fracture of nanocrystalline copper: molecular dynamics simulation Published In Acta Physica Sinica
2014	Fabrication of nanostructured aluminum sheets using four-layer accumulative roll bonding Published In Materials and Manufacturing Processes
2014	Fatigue analysis of a motorcycle frame system based on a road test and the finite element method Published In Materials Science Forum
2014	Grain refinement in the formability of aluminium thin cup Published In Materials Science Forum
2014	Influence of cold rolling reduction on the deformation behaviour and crystallographic orientation development Published In Computational Materials Science
2014	Influence of outer corner angle (OCA) on the plastic deformation and texture evolution in equal channel angular pressing Published In Computational Materials Science
2014	Investigation of closure of internal cracks during rolling by FE model considering crack surface roughness Published In International Journal of Advanced Manufacturing Technology
2014	Investigation of ultrafine grained AA1050 fabricated by accumulative roll bonding Published In Journal of Materials Science and Engineering A
2014	Microstructural evolution and mechanical property of AA5050 alloy deformed by accumulative roll bonding Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Microstructure and mechanical properties of AA5005/AA6061 laminated composite processed by accumulative roll bonding Published In Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
2014	Molecular dynamics simulation of the grain boundary sliding behaviour for Al Σ5 (2 1 0) Published In Computational Materials Science
2014	Molecular dynamics simulation on Σ5 grain boundaries of copper bicrystal under tensile and shear deformation Published In MRS Proceedings
2014	Molecular dynamics study on the atomic mechanisms of coupling motion of [0 0 1] symmetric tilt grain boundaries in copper bicrystal Published In Materials Research Express
2014	Multiscale model of elastic nanocontacts Published In Computational Materials Science
2014	Numerical comparison between Berkovich and conical nano-indentations: mechanical behaviour and micro-texture evolution Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2014	On the influence of mesh size during finite element simulation of equal channel angular pressing Published In Materials Science Forum
2014	Optimization and application of process parameters in an AZ61 alloy twin-roll strip casting Published In Materials Science Forum
2014	Response of the al Σ5 〈001〉 left {310} symmetric tilt grain boundary to the shear deformation simulated by molecular dynamics Published In Science of Advanced Materials
2014	Shear texture gradient in AA6061 aluminum alloy processed by accumulative roll bonding with high roll roughness Published In Journal of Alloys and Compounds
2014	Source strength and dispersion of CO2 releases from high-pressure pipelines: CFD model using real gas equation of state Published In Applied Energy
2014	Tensile fracture of ultrafine grained aluminum 6061 sheets by asymmetric cryorolling for microforming Published In International Journal of Damage Mechanics
2014	The mechanical behaviour of TiN and multi-layered coating of TiN/Ti on Ti6Al4V substrate during nano-indentation Published In International Journal of Surface Science and Engineering
2014	Vacancy-type defects study on ultra-fine grained aluminium processed by severe plastic deformation Published In Science of Advanced Materials
2013	A micro deep drawing of ARB processed aluminium foil AA1235 Published In International Journal of Materials and Product Technology
2013	A molecular dynamics simulation of fracture in nanocrystalline copper Published In Journal of Nano Research
2013	A study on the aluminum alloy AA1050 severely deformed by non-equal channel angular pressing Published In Advanced Materials Research
2013	An insight into the deformation and orientation development of severely plastic deformed aluminum Published In AIP Conference Proceedings
2013	Annealing behavior of accumulative roll bonding processed aluminum composites Published In Steel Research International
2013	Crystal plasticity FEM study on the influence of crystallographic orientation in copper single crystals subjected to equal channel angular pressing Published In Steel Research International
2013	Crystal plasticity study of the effect of the initial orientation on the indentation surface profile patterns and micro-textures of aluminum single crystal Published In Steel Research International
2013	Editorial Published In Materials Research Innovations
2013	Effect of pre-heating on the microstructural evolution and super-plasticity of Al deformed by accumulative roll bonding Published In Steel Research International
2013	Fabrication of ultra-thin nanostructured bimetallic foils by Accumulative Roll Bonding and Asymmetric Rolling Published In Scientific Reports
2013	Finite element analysis of high pressure torsion Published In Steel Research International
2013	Influences of magnetic annealing on the grain growth in a cryoECAPed 1050 aluminum alloy Published In Materials Characterization
2013	Investigation of deformation behavior during cold rolling cladding process of four-layer composite aluminum alloys Published In Advanced Materials Research
2013	Investigation of sample size effect on the deformation heterogeneity and texture development during equal channel angular pressing Published In Computational Materials Science
2013	Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2013	Microstructure and mechanical properties of 1050/6061 laminated composite processed by accumulative roll bonding Published In Reviews On Advanced Materials Science
2013	Occurrence of surface defects on strips during hot rolling process by FEM Published In International Journal of Advanced Manufacturing Technology
2013	Surface temperature difference for analysis of distortion of heavy weak-rigidity castings during heat treatment Published In Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture
2013	The wave motion of the rolling force during variable gauge rolling Published In Steel Research International
2013	Ultrafine grained AA1050/AA6061 composite produced by accumulative roll bonding Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2012	A numerical model for simulation of crack initiation around inclusion under tensile load Published In Journal of Computational and Theoretical Nanoscience
2012	Asymmetric cryorolling for fabrication of nanostructural aluminum sheets Published In Scientific Reports
2012	Crystal plasticity investigation of texture evolution of Al single crystal during extrusion through a bent channel Published In Journal of Computational and Theoretical Nanoscience
2012	Modeling texture evolution during ECAP of copper single crystal by crystal plasticity FEM Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2012	Optimization of cushion conditions in micro multi-point sheet forming Published In Journal of Materials Processing Technology
2012	Study of vacancy-type defects by positron annihilation in ultrafine-grained aluminum severely deformed at room and cryogenic temperatures Published In Acta Materialia
2011	An investigation into the tribological behaviour of a work roll material at high temperature Published In Wear
2011	Crystal plasticity modeling of texture evolution and heterogeneity in equal channel angular pressing of aluminum single crystal Published In Acta Materialia
2011	Size effect in micro multi-point sheet forming Published In Advanced Science Letters
2011	Vacancy-assisted hardening in nanostructured metals Published In Materials Letters
2010	A modelling of tensile deformation around the notch tip in single crystal aluminium Published In Computational Materials Science
2010	Crystal plasticity investigation of friction effect on texture evolution of al single crystal during ecap Published In Journal of Materials Science
2010	Effect of Mg/B ratio on the superconductivity of MgB2 bulk with SiC addition Published In Physical Review B: Condensed Matter and Materials Physics
2010	Optimization of short stroke control curve in hot strip mill by FEM modelling Published In Advanced Materials Research
2010	Optimization of short stroke control preset for automatic width control of hot rolling mill Published In Journal of Iron and Steel Research International
2009	Atomic-scale anisotropy of nanoscratch behavior of single crystal iron Published In Wear
2009	Atomistic simulation of nanoindentation of iron with different indenter shapes Published In Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology
2009	Effect of sintering time on superconductivity in MgB2 Published In International Journal of Modern Physics B
2009	Experimental study of the effects of rough texture on surface deformation during cold metal forming Published In Wear
2009	Influence of force-based crosstalk on the 'wedge method' in lateral force microscopy Published In Measurement Science and Technology
2009	Influence of heat treatment on superconductivity of MgB2 bulk sintered in flowing welding grade ar atmosphere Published In IEEE Transactions on Magnetics
2009	Influence of nanocrystalline boron precursor powder on superconductivity in MgB2 bulk Published In Journal of Nanoscience and Nanotechnology
2009	Molecular dynamics simulation of effect of indenter shape on nanoscratch of Ni Published In Wear
2009	Optimization of nominal mixing ratio of Mg to B in fabrication of magnesium diboride bulk Published In IEEE Transactions on Applied Superconductivity
2009	Polycrystal geometry modeling of crystal plasticity finite element method with voronoi diagram Published In Cailiao yu Yejin Xuebao/Journal of Materials and Metallurgy
2009	Significant enhancement of bond strength in the accumulative roll bonding process using nano-sized SiO2 particles Published In Journal of Materials Processing Technology
2009	The effect of carbon doping on the upper critical field (Hc2) and resistivity of MgB2 by using sucrose (C12H22O11) as the carbon source Published In Superconductor Science and Technology
2008	A Mathematical Model for the Prediction of Ridge Deformation in Cold Rolling Published In Steel Research International
2008	A Study of Crack Propagation in BCC Iron by Molecular Dynamics Method Published In Key Engineering Materials
2008	A study of microstructural evolution around crack tip using crystal plasticity finite-element method Published In Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology
2008	An orientation-dependent failure criterion for FCC crystals Published In Key Engineering Materials
2008	Atomic simulation of effect of stacking fault and dislocation on fracture behaviour in Fe crystal Published In Key Engineering Materials
2008	Effect of surface texture on deformation behavior of asperity in cold metal forming Published In Advanced Materials Research
2008	Experimental and theoretical investigation of the asperity flattening process under large bulk strain Published In Proceedings of the Institution of Mechanical Engineers Part J: Journal of Engineering Tribology
2008	Modeling of Heterogeneous tensile deformation of Polyscrystalline Aluminum Published In Steel Research International
2008	Numerical investigation of strip deformation behavior between stands of hot finishing mill Published In Steel Research International
2008	Significant improvement of Jc in MgB2 bulk superconductor using ball-milled high-purity crystalline boron Published In Superconductor Science and Technology
2008	Simulation of rolling behaviour of cubic oriented al single crystal with crystal plasticity FEM Published In Journal of Materials Processing Technology
2008	System modelling of a lateral force microscope Published In Nanotechnology
2007	Measurement of the forward slip in cold strip rolling using a high speed digital camera Published In Journal of Mechanical Science and Technology
2007	Molecular dynamics simulation about porous thin-film growth in secondary deposition Published In Applied Surface Science
2007	Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method Published In Nonferrous Metals Society of China Transactions
2007	Surface roughness transformation and deformation of the scale of hot rolling Published In International Journal of Surface Science and Engineering

Conference Paper

Year	Title
2019	A comprehensive approach to control and minimize squat efects in a railway network Published In Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018
2019	Structural and microstructural investigation of two distinct classes of white etching layer formation on the rail surface Published In Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018
2018	CO2SAFE-ARREST: A full-scale burst test research program for carbon dioxide pipelines - Part 2: Is the BTCM out of touch with dense-phase CO2? Published In 2018 12th International Pipeline Conference
2018	CO2Safe-Arrest: A full-scale burst test research program for carbon dioxide pipelines - Part 3: Dispersion modelling Published In 2018 12th International Pipeline Conference: IPC2018: Volume 2: Pipeline Safety Management Systems; Project Management, Design, Construction, and Environmental Issues; Strain Based Design; Risk and Reliability; Northern Offshore and Production Pipelines
2014	Atomistic simulation on the structure and mechanical response of Σ3, Σ5 tilt grain boundaries under tension Published In TMS2014 143rd Annual Meeting & Exhibition: Annual Meeting Supplemental Proceedings
2014	Automatic measurement of Centreline segregation in continuously cast line pipe steel slabs Published In Energy Materials 2014, Conference Proceedings
2014	Crystal plasticity FEM study of the effects of BW hardening model parameters on nano-indentation deformation behaviour of copper single crystal Published In TMS2014 143rd Annual Meeting & Exhibition: Annual Meeting Supplemental Proceedings
2014	Influence factors for brittle-to-ductile transition in twinned copper Published In TMS2014 143rd Annual Meeting & Exhibition: Annual Meeting Supplemental Proceedings
2014	Re-examination of battelle two curve method Published In 2014 10th International Pipeline Conference: Volume 3: Materials and Joining; Risk and Reliability
2014	Venting of a 32 km NG pipeline - Field measurements and CFD simulations Published In 2014 10th International Pipeline Conference: Volume 1: Design and Construction; Environment; Pipeline Automation and Measurement
2013	Recent developments in flat rolling technologies Published In PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing
2013	Simulation of defects in micro-deep drawing of an aluminium alloy foil Published In The 11th International Conference on Numerical Methods in Industrial Forming Processes
2013	Transition of ductile and brittle fracture during DWTT by FEM Published In 13th International Conference on Fracture (ICF)
2013	Two-dimensional CFD modelling of gas-decompression behaviour Published In The 6th International Pipeline Technology Conference
2012	Crystal plasticity finite element analysis of influence of initial crystal orientation on texture evolution and deformation heterogeneity of cold-rolled aluminium Published In Proceedings of the 14th International Conference of Metal Forming
2012	Deformation mechanism in nanoindentation of Ti 63.375Fe 34.125Sn 2.5 alloy Published In 141st Annual Meeting and Exhibition, TMS 2012
2012	Fracture behaviours of TiN and TiN/Ti multilayer coatings on Ti substrate during nanoindentation Published In 141st Annual Meeting and Exhibition, TMS 2012
2012	Investigation of the effects of pipe wall roughness and pipe diameter on the decompression wave speed in natural gas pipelines Published In 9th International Pipeline Conference, Volume 3: Materials and Joining
2012	Mechanical behaviours of TiN and TiN/Ti multilayer coating on Ti6Al4V substrate during nanoindentation Published In 15th International Conference on Advances in Materials & Processing Technologies
2012	The 'Eckert number phenomenon' in pipeline decompression Published In Proceedings of the Biennial International Pipeline Conference, IPC
2012	Tracing of macrosegregation ring in slab during bar rough rolling using FEM Published In 14th International Conference of Metal Forming
2012	Wave motion of rolling force in variable gauge rolling process Published In 15th International Conference on Advances in Materials & Processing Technologies
2010	Development of an optimum pass schedule setup for strip shape quality in hot strip rolling Published In Proceedings of the 10th International Conference on Steel Rolling
2010	Effect of nano-sized particles on bond strength in accumulative roll bonding Published In 2010 3rd International Conference on Nanoscience and Nanotechnology, ICONN 2010
2010	Tribological characterization of a high speed steel roll material at elevated temperature Published In Proceedings of the 10th International Conference on Steel Rolling
2009	Experiment and molecular dynamics simulation of nanoindentation of body centered cubic iron Published In 2nd International Conference on Nanoscale Materials and Engineering
2009	Molecular dynamic simulation of effect of crystallographic orientation on nano-indentation/scratching behaviors of BCC iron Published In 5th China International Symposium on Tribology/1st International Tribology Symposium of IFToMM
2008	3D misorientation of cantilevers and its impact in friction force microscopy Published In China International Symposium on Tribology
2008	Effect of high spot in hot rolled coil on ridge-buckle defect in cold rolled strip Published In Symposium on Advanced Structural Steels and New Rolling Technologies
2008	Effects of sintering temperature on the superconductivity of MgB2 made with high-purity crystalline B precursor Published In 22nd International Cryogenic Engineering Conference 2008
2008	Molecular dynamic simulation of effect of crystallographic orientation on nano-indentation/scratching behaviors of BCC iron Published In Fifth China International Symposium on Tribology (CIST 2008)
2008	Molecular dynamics simulation of crack propagation on different slip planes of BCC iron Published In International Conference On Nanoscience and Nanotechnology
2008	Oxidation of type 304 stainless steel under simulated reheating conditions Published In Baosteel Academic Conference
2008	Ridge and ridge-buckle defects in cold rolling Published In Baosteel Biennial Academic Conference
2007	A study of plastic deformation about crack tip using crystal plasticity finite element method Published In 34th Leeds-Lyon Symposium on Tribology
2007	Atomic simulation of effect of dislocation on crack propagation in FCC metals Published In 34th Leeds-Lyon Symposium on Tribology
2007	Experimental and theoretical investigation of asperity flattening process under large bulk strain Published In 34th Leeds-Lyon Symposium on Tribology
2007	Numerical determination of lateral frictional force in atomic friction microscope Published In 34th Leeds-Lyon Symposium on Tribology

Investigator On

Year	Title
2020 - 2023	Analysis and solutions of pipeline girth weld failure under the longitudinal stress due to strength mis-matching Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
2017	Large-volume gradient materials: manufacturing and deformation mechanism Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2012	Joint processing facility for the production of far-from-equilibrium alloy structures Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
2011	Lubrication mechanism in hot strip rolling Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2010	Energy Pipelines CRC Awarded by: NSW Industry & Investment Funding Scheme: NSW Science Leveraging Fund
	A Physical-based abrasive wear model for high-speed steel at high temperature Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
	Improving the weld HAZ toughness of high strength thick walled line pipe Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
	In-situ straining scanning electron microscope facility for nanomaterials Awarded by: Australian Research Council (ARC) Funding Scheme: Linkage Infrastructure Equipment & Facilities (LIEF)
	Significance, measurement and control of centreline segregation in continuously cast line pipe steels Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund
	Strain ageing in fusion-bonded epoxy coated pipeline steel Awarded by: Baosteel-Australia Joint Research and Development Centre Funding Scheme: R&D Fund

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	Acoustic Propagation Variation with Temperature Profile in Water Filled Steel Pipes at Pressure	Hough, John
Doctor of Philosophy	Atomistic Simulation of Hydrogen Embrittlement of Grain Boundaries in Metals	Li, Jiaqing
Doctor of Philosophy	An investigation of the mechanical properties and deformation of graphene/metal composites by molecular dynamic simulations	Zhang, Che
Doctor of Philosophy (Integrated)	Texture Evolution and Mechanical Properties of Aluminium Alloy by Accumulative Roll Bonding	Wang, Rui
Doctor of Philosophy	Application of Molecular Dynamics Simulation for Hydrogen Embrittlement of Metals	Zhang, Zehan
Doctor of Philosophy	Development of a Numerical Model to Predict the Capacity of a Pipeline to Transport High-Pressure Hydrogen Gas	Uddin, Tariq
Doctor of Philosophy	High temperature lubricant for hot rolling of steel	Huynh, Khai

Located In Facility

Building 8, Room 101

Orcid Id

http://orcid.org/0000-0003-2922-6962 (confirmed)

Lu, Cheng Professor

Professor

Overview

Top Publications

Research Overview

Publications

Selected Publications

Journal Article

Conference Paper

Funding

Investigator On

Supervision

Advisees

Graduate Advising Relationship

Contact

Located In Facility

Identity

Orcid Id

Overview

Top Publications

Research Overview

Publications

Selected Publications

Journal Article

Conference Paper

Funding

Investigator On

Supervision

Advisees

Graduate Advising Relationship

Contact

Located In Facility

Identity

Orcid Id

Visualisations