Kosasih, Buyung B.

Overview

Buyung Kosasih obtained his Bachelor of Engineering Degree and Doctor of Philosophy degrees from the University of Wollongong. His main research interest include river and wind based renewable energy technologies; green eco-friendly lubricants for material processing; and applied fluid dynamics of industrial thin coating process.

Top Publications

Year	Title
2011	Roof mounting site analysis for micro-wind turbines Published in Renewable Energy
2012	Experimental study of shrouded micro-wind turbine Published in Procedia Engineering
2016	Influence of inflow turbulence intensity on the performance of bare and diffuser-augmented micro wind turbine model Published in Renewable Energy
2017	Surface film adsorption and lubricity of soybean oil in-water emulsion and triblock copolymer aqueous solution: A comparative study Published in Lubricants
2013	A molecular dynamics simulation of boundary lubrication: The effect of n-alkanes chain length and normal load Published in Wear
2007	Mixed film lubrication of strip rolling using O/W emulsions Published in Tribology International

Research Areas

Research Overview

Fluid dynamics of industrial processes; Aqueous eco-friendly lubrication; Renewable energy technologies

Available as Research Supervisor

Available for Collaborative Projects

Head Of

Mechanical, Materials, Mechatronic and Biomedical Engineering Head of Postgraduate Studies 2019 -
School of Mechanical, Materials, Mechatronic and Biomedical Engineering Mechanical Engineering Academic Program Director 2014 -

Selected Publications

Journal Article

Year	Title
2020	Above-roof air temperature effects on HVAC and cool roof performance: Experiments and development of a predictive model Published In Energy and Buildings
2020	Achieving the excellent self-lubricity and low wear of TiAl intermetallics through the addition of copper coated graphite Published In Composites Part B: Engineering
2020	Lubrication performance of aqueous copolymer lubricants with phosphate ester additive at different temperature on the Si surface Published In Lubrication Science
2020	Role of TiO2 phase composition tuned by LiOH on the electrochemical performance of dual-phase Li4Ti5O12-TiO2 microrod as an anode for lithium-ion battery Published In Energies
2020	The effects of shape and size on duct-augmented horizontal axis turbine performance Published In Wind Engineering
2020	Vortex dynamics and fluctuations of impinging planar jet Published In ISIJ International
2019	Aerodynamic analysis of a stator-augmented linear cascade wind turbine Published In Wind Energy
2019	Building integration of stator-augmented PowerWindow, a linear cascade wind turbine Published In Energy Science and Engineering
2019	Coating film profiles generated by fluctuating location of the wiping pressure and shear stress Published In ISIJ Internationa
2019	Dual effects of TiSiO4composite nanoparticles on dispersionstability and lubrication performance of vegetable oil‐in‐water emulsions Published In Lubrication Science
2018	Aerodynamic analysis of a linear cascade wind turbine Published In Wind Energy
2018	An online condition monitoring system implemented an internet connectivity and FTP for low speed slew bearing Published In Journal of Physics: Conference Series
2018	Dispersion Stability and Lubrication Performance Correlation of Vegetable Oil-In-Water Emulsions with Nanoparticle-Shielded Oil Droplets Published In Lubricants
2018	Parsimonious Network Based on a Fuzzy Inference System (PANFIS) for Time Series Feature Prediction of Low Speed Slew Bearing Prognosis Published In Applied Sciences (APPS)
2018	The effects of installation configuration and solidity on the power generation of a linear cascade wind turbine Published In Journal of Wind Engineering and Industrial Aerodynamics
2017	A study of abrasive wear on high speed steel surface in hot rolling by Discrete Element Method Published In Tribology International
2017	Additive Manufacturing, Modeling and Performance Evaluation of 3D Printed Fins for Surfboards Published In MRS Advances
2017	Adsorption structure and adhesion strength of aqueous copolymer lubricant films on Si surface Published In Lubrication Science
2017	Integrated Condition Monitoring and Prognosis Method for Incipient Defect Detection and Remaining Life Prediction of Low Speed Slew Bearings Published In Machines
2017	Micro-scratch behaviour of adsorbed film formed by aqueous copolymer lubricants with phosphate ester additive on Ti-coated surface Published In Industrial Lubrication and Tribology
2017	Phase Behavior and Lubricity of Aqueous PEOPPO- PEO and PPO-PEO-PPO Triblock Copolymer Solutions Published In Tribology Transactions
2017	Surface film adsorption and lubricity of soybean oil in-water emulsion and triblock copolymer aqueous solution: A comparative study Published In Lubricants
2017	Surfing the 3D printing wave: the changing face of surfboard fin production Published In The Conversation
2017	The structural, tribological, and rheological dependency of thin hexadecane film confined between iron and iron oxide surfaces under sliding conditions Published In Tribology International
2016	A simulation of friction behavior on oxidised high speed steel (HSS) work rolls Published In ARPN Journal of Engineering and Applied Sciences
2016	Acoustic emission-based condition monitoring methods: review and application for low speed slew bearing Published In Mechanical Systems and Signal Processing
2016	Influence of Cr-Rich oxide scale on sliding wear mechanism of ferritic stainless steel at high temperature Published In Tribology Letters
2016	Influence of inflow turbulence intensity on the performance of bare and diffuser-augmented micro wind turbine model Published In Renewable Energy
2016	On the nonlinear resonant dynamics of Timoshenko microbeams: effects of axial load and geometric imperfection Published In Meccanica
2016	Thickness and scratch resistance of adsorbed film formed by triblock symmetrical copolymer solutions Published In Lubrication Science
2016	Tribological behavior of aqueous copolymer lubricant in mixed lubrication regime Published In ACS Applied Materials and Interfaces
2015	Adsorbed film structure and tribological performance of aqueous copolymer lubricants with phosphate ester additive on Ti coated surface Published In Wear
2015	Adsorption of normal-alkanes on Fe(110), FeO(110), and Fe2O3(0001): Influence of iron oxide surfaces Published In The Journal of Physical Chemistry C: Energy Conversion and Storage, Optical and Electronic Devices, Interfaces, Nanomaterials, and Hard Matter
2015	Application of the largest Lyapunov exponent algorithm for feature extraction in low speed slew bearing condition monitoring Published In Mechanical Systems and Signal Processing
2015	Comparisons of stress, heat and wear generated by AC versus DC locomotives under diverse operational conditions Published In Wear
2015	Effect of thermomechanical treatment on sliding wear of high-Cr cast iron with large plastic deformation Published In Tribology International
2015	FE method to predict damage formation on curved track for various worn status of wheel/rail profiles Published In Wear
2015	Power generation analysis of PowerWindow, a linear wind generator, using computational fluid dynamic simulations Published In Journal of Wind Engineering and Industrial Aerodynamics
2015	The influence of high temperature due to high adhesion condition on rail damage Published In Wear
2015	Thin film lubrication of hexadecane confined by iron and iron oxide surfaces: A crucial role of surface structure Published In Journal of Chemical Physics
2015	Tribo-surface charge and polar lubricant molecules on friction and lubrication under multiple 3D asperity contacts Published In Wear
2014	A 3D dynamic model to investigate wheel-rail contact under high and low adhesion Published In International Journal of Mechanical Sciences
2014	Analysis of the power augmentation mechanisms of diffuser shrouded micro wind turbine with computational fluid dynamics simulations Published In Wind and Structures: an international journal
2014	Circular domain features based condition monitoring for low speed slewing bearing Published In Mechanical Systems and Signal Processing
2014	Degradation trend estimation and prognosis of large low speed slewing bearing lifetime Published In Applied Mechanics and Materials
2014	Dry sliding wear behaviour of full pearlite obtained by cladding low carbon steel to hypoeutectoid steel Published In Advanced Materials Research
2014	Flow analysis of shrouded small wind turbine with a simple frustum diffuser with computational fluid dynamics simulations Published In Journal of Wind Engineering and Industrial Aerodynamics
2014	Friction and anti-wear property of aqueous tri-block copolymer solutions in metal forming Published In International Journal of Surface Science and Engineering
2014	High-efficiency shrouded micro wind turbine for urban-built environment Published In Applied Mechanics and Materials
2014	Large wind turbine structural load control: trailing edge deformation mechanism for active variable-camber blade Published In Wind Engineering
2014	Roughness and lubricant effect on 3d atomic asperity contact Published In Tribology Letters
2014	The effect of molecular structure on the adsorption of PPO-PEO-PPO triblock copolymers on solid surfaces Published In Materials Science Forum
2014	Trailing edge deformation mechanism for active variable-camber wind turbine blade Published In Applied Mechanics and Materials
2014	Tribological performance of aqueous copolymers solutions in metallic contact Published In Materials Science Forum
2013	A molecular dynamics simulation of 3D rough lubricated contact Published In Tribology International
2013	A molecular dynamics simulation of boundary lubrication: The effect of n-alkanes chain length and normal load Published In Wear
2013	A simulation of wear behaviour of high-speed steel hot rolls by means of high temperature pin-on-disc tests Published In Wear
2013	Analysis of interference factors of air turbine cascades Published In Engineering Applications of Computational Fluid Mechanics
2013	Condition monitoring of low speed slewing bearings based on ensemble empirical mode decomposition method Published In Transactions of the Korean society for noise and vibration engineering
2013	Condition monitoring of naturally damaged slow speed slewing bearing based on ensemble empirical mode decomposition Published In Journal of Mechanical Science and Technology
2013	Finite element modeling of the nanoindentation of layers of porous oxide on high speed steel Published In Steel Research International
2013	Investigation on mechanical properties of high speed steel roll material by nanoindentation Published In Materials Research Innovations
2013	Tribological performance of aqueous copolymer lubricant in loaded contact with Si and coated Ti film Published In Wear
2012	Experimental study of shrouded micro-wind turbine Published In Procedia Engineering
2012	Variations in the microstructure and mechanical properties of the oxide layer on high speed steel hot rolling work rolls Published In Journal of Materials Processing Technology
2011	Roof mounting site analysis for micro-wind turbines Published In Renewable Energy
2010	Learning finite element methods by building applications Published In International Journal of Mechanical Engineering Education
2010	MRE Properties under shear and squeeze modes and applications Published In Journal of Intelligent Material Systems and Structures
2009	MRE properties under shear and squeeze modes and applications Published In Journal of Physics
2008	A CFD study of lubricant flow with oil droplets in rolling inlet zone Published In International Journal of Computational Fluid Dynamics
2007	A 2-DOF MR actuator joystick for virtual reality applications Published In Sensors and Actuators A: Physical
2007	Experimental and numerical study of O/W emulsion lubricated strip rolling in mixed film regime Published In Tribology Letters
2007	Incorporating the development of a graphical user interface in courses teaching numerical methods for engineers Published In International Journal of Mechanical Engineering Education
2007	Mixed film lubrication of strip rolling using O/W emulsions Published In Tribology International
2007	Particle Trajectories in Dilute Phase Pneumatic Conveying Published In Particulate Science and Technology: an international journal

Book

Year	Title
2017	Pemrograman Metode Elemen Hingga Berbasis Matlab + cd Publisher Edisi⁄Cetakan
2012	Teori dan Aplikasi Metode Elemen Hingga
2007	Teori dan Aplikasi Komputasi Numerik

Conference Paper

Year	Title
2019	Near-Roof Air Temperatures: Modelling the Implications for HVAC Performance and Cool Roofs Published In 16th IBPSA International Conference and Exhibition
2014	A tool to estimate the wheel/rail contact and temperature rising under dry, wet and oily conditions Published In COMPRAIL 14th Conference on Railway Engineering Design and Optimization
2013	An application of nonlinear feature extraction – a case study for low speed slewing bearing condition monitoring and prognosis Published In 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM)
2013	Condition monitoring of slow speed slewing bearing based on largest lyapunov exponent algorithm and circular-domain feature extractions Published In 26th International Condition Monitoring and Diagnostic Engineering Management Congress (COMADEM)
2013	Friction and wear studies of Si and Ti surfaces lubricated by aqueous copolymer Published In 5th World Tribology Congress, WTC 2013
2013	Rolling contact stress states of two contact points on curved track Published In 10th World Congress on Railway Research
2012	Experimental study of the performance of bare and nozzle-diffuser shrouded micro wind turbine under axial and non-axial inflow condition Published In 18th Australasian Fluid Mechanics Conference
2011	Modelling net zero energy options for a sustainable buildings research centre Published In 12th Conference of International Building Performance Simulation Association, Building Simulation 2011 Conference
2010	Effect of bulk temperature on the tribological performance of aqueous symmetric tri-block copolymers (PPO-PEO-PPO and PEO-PPO-PEO) based lubricant Published In International Tribology Congress ASIATRIB 2010
2009	CFD analysis of air turbines as power take-off systems in oscillating water column wave energy conversion plant Published In European Wave and Tidal Energy Conference, Uppsala, Sweden
2008	CFD Analysis of Blade Cascades for OWC Turbines Published In 2nd International Conference on Ocean Energy (ICOE 2008)
2008	CFD Analysis of the Performance of Blade Cascades for Air Turbines in Oscillating Water Column Wave Energy Conversion Systems Published In Proc. 3rd International Solar Energy Society Conference Asia Pacific Region (ISES-AP-08)
2008	Fabrication and characterization of MR elastomers with high MR effects Published In 15th International Congress on Sound and Vibration, 6-10 July 2008, Daejeon, Korea
2007	Development of a 2-DOF MR joysticks for virtual reality applications Published In International Conference on Electrorheological Fluids and Magnetorheological Suspensions
2007	MATLAB simulation of semi-active skyhook control of a quarter car incorporating an MR damper and a fuzzy logic controller Published In International Conference on Nonlinear Science and Complexity
2007	Performance testing and hysteresis modeling of a position-feedback MR actuator Published In International Conference on Electrorheological Fluids and Magnetorheological Suspensions 2006

Other Publications

Year	Title
2018	Driving Increased Utilisation of Cool Roofs on Large-Footprint Buildings - Final Report

Investigator On

Year	Title
2020	ARC Research Hub for Australian Steel Innovation Awarded by: Australian Research Council (ARC) Funding Scheme: Industrial Transformation Research Hubs
2011	Lubrication mechanism in hot strip rolling Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2007	Tribological contact of work roll in hot rolling Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects

Impact Story

3D printed fins for surfboards: finding the right flow
Summary
Engagement with media and working with industry

Detail View

Detail View Summary View
Detail of Impact
Our work on 3D printed resulted in a lot of media exposure for research at the University of Wollongong
Field of Research
Countries / Regions
Beneficiaries

Beneficiary Quantification Description
External Partners
Evidence of Impact

Evidence Description
UOW Centres / Programs
UOW Researchers / Collaborators

Available as Research Supervisor

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	Development of a Sustainable Supply Chain Framework for Commercial Aviation - Does SCOR Stand the test of time?
Doctor of Philosophy	Unsteady Impingement Pressure of Planar Thin Coating Wiping Jets: Governing Role of Jet Flow Field Perturbations and Jet Vortex Dynamics	Phan, Le Quang
Doctor of Philosophy (Integrated)	Computational and Experimental Study of Shrouded River Current Turbine in finite size channel	Rachman, Aditya
Doctor of Philosophy	Dispersion stability and lubricity of environmentally friendly TiO2/SiO2 nanoparticle-functionalised oil droplets of soybean vegetable oil-in-water emulsions	Taheri, Reza
Doctor of Philosophy	Dynamics Flow in the meniscus Region of Liquid drag-out	Ahmed, Rubel
Master of Research - EIS	Design of specialised torsional springs for assistive robotics with gravity compensation	Napawan, Yotsathorn

Awards And Honors

Outstanding Contribution to Teaching and Learning Award, 2013

Teaching Overview

2016 - : Associate Professor, The school of Mechanical, Materials & Mechatronic Engineering, University of Wollongong.

2010 - 2015 : Senior Lecturer, The school of Mechanical, Materials & Mechatronic Engineering, University of Wollongong.

2006 to 2009: Lecturer, The school of Mechanical, Materials & Mechatronic Engineering, University of Wollongong.

2000 to 2005: Research Associate, The school of Mechanical, Materials & Mechatronic Engineering, University of Wollongong.

Top Publications

Year	Title
2011	Roof mounting site analysis for micro-wind turbines Published in Renewable Energy
2012	Experimental study of shrouded micro-wind turbine Published in Procedia Engineering
2016	Influence of inflow turbulence intensity on the performance of bare and diffuser-augmented micro wind turbine model Published in Renewable Energy
2017	Surface film adsorption and lubricity of soybean oil in-water emulsion and triblock copolymer aqueous solution: A comparative study Published in Lubricants
2013	A molecular dynamics simulation of boundary lubrication: The effect of n-alkanes chain length and normal load Published in Wear
2007	Mixed film lubrication of strip rolling using O/W emulsions Published in Tribology International

Research Areas

Research Overview

Fluid dynamics of industrial processes; Aqueous eco-friendly lubrication; Renewable energy technologies

Head Of

Mechanical, Materials, Mechatronic and Biomedical Engineering Head of Postgraduate Studies 2019 -
School of Mechanical, Materials, Mechatronic and Biomedical Engineering Mechanical Engineering Academic Program Director 2014 -

Selected Publications

Journal Article

Year	Title
2020	Above-roof air temperature effects on HVAC and cool roof performance: Experiments and development of a predictive model Published In Energy and Buildings
2020	Achieving the excellent self-lubricity and low wear of TiAl intermetallics through the addition of copper coated graphite Published In Composites Part B: Engineering
2020	Lubrication performance of aqueous copolymer lubricants with phosphate ester additive at different temperature on the Si surface Published In Lubrication Science
2020	Role of TiO2 phase composition tuned by LiOH on the electrochemical performance of dual-phase Li4Ti5O12-TiO2 microrod as an anode for lithium-ion battery Published In Energies
2020	The effects of shape and size on duct-augmented horizontal axis turbine performance Published In Wind Engineering
2020	Vortex dynamics and fluctuations of impinging planar jet Published In ISIJ International
2019	Aerodynamic analysis of a stator-augmented linear cascade wind turbine Published In Wind Energy
2019	Building integration of stator-augmented PowerWindow, a linear cascade wind turbine Published In Energy Science and Engineering
2019	Coating film profiles generated by fluctuating location of the wiping pressure and shear stress Published In ISIJ Internationa
2019	Dual effects of TiSiO4composite nanoparticles on dispersionstability and lubrication performance of vegetable oil‐in‐water emulsions Published In Lubrication Science
2018	Aerodynamic analysis of a linear cascade wind turbine Published In Wind Energy
2018	An online condition monitoring system implemented an internet connectivity and FTP for low speed slew bearing Published In Journal of Physics: Conference Series
2018	Dispersion Stability and Lubrication Performance Correlation of Vegetable Oil-In-Water Emulsions with Nanoparticle-Shielded Oil Droplets Published In Lubricants
2018	Parsimonious Network Based on a Fuzzy Inference System (PANFIS) for Time Series Feature Prediction of Low Speed Slew Bearing Prognosis Published In Applied Sciences (APPS)
2018	The effects of installation configuration and solidity on the power generation of a linear cascade wind turbine Published In Journal of Wind Engineering and Industrial Aerodynamics
2017	A study of abrasive wear on high speed steel surface in hot rolling by Discrete Element Method Published In Tribology International
2017	Additive Manufacturing, Modeling and Performance Evaluation of 3D Printed Fins for Surfboards Published In MRS Advances
2017	Adsorption structure and adhesion strength of aqueous copolymer lubricant films on Si surface Published In Lubrication Science
2017	Integrated Condition Monitoring and Prognosis Method for Incipient Defect Detection and Remaining Life Prediction of Low Speed Slew Bearings Published In Machines
2017	Micro-scratch behaviour of adsorbed film formed by aqueous copolymer lubricants with phosphate ester additive on Ti-coated surface Published In Industrial Lubrication and Tribology
2017	Phase Behavior and Lubricity of Aqueous PEOPPO- PEO and PPO-PEO-PPO Triblock Copolymer Solutions Published In Tribology Transactions
2017	Surface film adsorption and lubricity of soybean oil in-water emulsion and triblock copolymer aqueous solution: A comparative study Published In Lubricants
2017	Surfing the 3D printing wave: the changing face of surfboard fin production Published In The Conversation
2017	The structural, tribological, and rheological dependency of thin hexadecane film confined between iron and iron oxide surfaces under sliding conditions Published In Tribology International
2016	A simulation of friction behavior on oxidised high speed steel (HSS) work rolls Published In ARPN Journal of Engineering and Applied Sciences
2016	Acoustic emission-based condition monitoring methods: review and application for low speed slew bearing Published In Mechanical Systems and Signal Processing
2016	Influence of Cr-Rich oxide scale on sliding wear mechanism of ferritic stainless steel at high temperature Published In Tribology Letters
2016	Influence of inflow turbulence intensity on the performance of bare and diffuser-augmented micro wind turbine model Published In Renewable Energy
2016	On the nonlinear resonant dynamics of Timoshenko microbeams: effects of axial load and geometric imperfection Published In Meccanica
2016	Thickness and scratch resistance of adsorbed film formed by triblock symmetrical copolymer solutions Published In Lubrication Science
2016	Tribological behavior of aqueous copolymer lubricant in mixed lubrication regime Published In ACS Applied Materials and Interfaces
2015	Adsorbed film structure and tribological performance of aqueous copolymer lubricants with phosphate ester additive on Ti coated surface Published In Wear
2015	Adsorption of normal-alkanes on Fe(110), FeO(110), and Fe2O3(0001): Influence of iron oxide surfaces Published In The Journal of Physical Chemistry C: Energy Conversion and Storage, Optical and Electronic Devices, Interfaces, Nanomaterials, and Hard Matter
2015	Application of the largest Lyapunov exponent algorithm for feature extraction in low speed slew bearing condition monitoring Published In Mechanical Systems and Signal Processing
2015	Comparisons of stress, heat and wear generated by AC versus DC locomotives under diverse operational conditions Published In Wear
2015	Effect of thermomechanical treatment on sliding wear of high-Cr cast iron with large plastic deformation Published In Tribology International
2015	FE method to predict damage formation on curved track for various worn status of wheel/rail profiles Published In Wear
2015	Power generation analysis of PowerWindow, a linear wind generator, using computational fluid dynamic simulations Published In Journal of Wind Engineering and Industrial Aerodynamics
2015	The influence of high temperature due to high adhesion condition on rail damage Published In Wear
2015	Thin film lubrication of hexadecane confined by iron and iron oxide surfaces: A crucial role of surface structure Published In Journal of Chemical Physics
2015	Tribo-surface charge and polar lubricant molecules on friction and lubrication under multiple 3D asperity contacts Published In Wear
2014	A 3D dynamic model to investigate wheel-rail contact under high and low adhesion Published In International Journal of Mechanical Sciences
2014	Analysis of the power augmentation mechanisms of diffuser shrouded micro wind turbine with computational fluid dynamics simulations Published In Wind and Structures: an international journal
2014	Circular domain features based condition monitoring for low speed slewing bearing Published In Mechanical Systems and Signal Processing
2014	Degradation trend estimation and prognosis of large low speed slewing bearing lifetime Published In Applied Mechanics and Materials
2014	Dry sliding wear behaviour of full pearlite obtained by cladding low carbon steel to hypoeutectoid steel Published In Advanced Materials Research
2014	Flow analysis of shrouded small wind turbine with a simple frustum diffuser with computational fluid dynamics simulations Published In Journal of Wind Engineering and Industrial Aerodynamics
2014	Friction and anti-wear property of aqueous tri-block copolymer solutions in metal forming Published In International Journal of Surface Science and Engineering
2014	High-efficiency shrouded micro wind turbine for urban-built environment Published In Applied Mechanics and Materials
2014	Large wind turbine structural load control: trailing edge deformation mechanism for active variable-camber blade Published In Wind Engineering
2014	Roughness and lubricant effect on 3d atomic asperity contact Published In Tribology Letters
2014	The effect of molecular structure on the adsorption of PPO-PEO-PPO triblock copolymers on solid surfaces Published In Materials Science Forum
2014	Trailing edge deformation mechanism for active variable-camber wind turbine blade Published In Applied Mechanics and Materials
2014	Tribological performance of aqueous copolymers solutions in metallic contact Published In Materials Science Forum
2013	A molecular dynamics simulation of 3D rough lubricated contact Published In Tribology International
2013	A molecular dynamics simulation of boundary lubrication: The effect of n-alkanes chain length and normal load Published In Wear
2013	A simulation of wear behaviour of high-speed steel hot rolls by means of high temperature pin-on-disc tests Published In Wear
2013	Analysis of interference factors of air turbine cascades Published In Engineering Applications of Computational Fluid Mechanics
2013	Condition monitoring of low speed slewing bearings based on ensemble empirical mode decomposition method Published In Transactions of the Korean society for noise and vibration engineering
2013	Condition monitoring of naturally damaged slow speed slewing bearing based on ensemble empirical mode decomposition Published In Journal of Mechanical Science and Technology
2013	Finite element modeling of the nanoindentation of layers of porous oxide on high speed steel Published In Steel Research International
2013	Investigation on mechanical properties of high speed steel roll material by nanoindentation Published In Materials Research Innovations
2013	Tribological performance of aqueous copolymer lubricant in loaded contact with Si and coated Ti film Published In Wear
2012	Experimental study of shrouded micro-wind turbine Published In Procedia Engineering
2012	Variations in the microstructure and mechanical properties of the oxide layer on high speed steel hot rolling work rolls Published In Journal of Materials Processing Technology
2011	Roof mounting site analysis for micro-wind turbines Published In Renewable Energy
2010	Learning finite element methods by building applications Published In International Journal of Mechanical Engineering Education
2010	MRE Properties under shear and squeeze modes and applications Published In Journal of Intelligent Material Systems and Structures
2009	MRE properties under shear and squeeze modes and applications Published In Journal of Physics
2008	A CFD study of lubricant flow with oil droplets in rolling inlet zone Published In International Journal of Computational Fluid Dynamics
2007	A 2-DOF MR actuator joystick for virtual reality applications Published In Sensors and Actuators A: Physical
2007	Experimental and numerical study of O/W emulsion lubricated strip rolling in mixed film regime Published In Tribology Letters
2007	Incorporating the development of a graphical user interface in courses teaching numerical methods for engineers Published In International Journal of Mechanical Engineering Education
2007	Mixed film lubrication of strip rolling using O/W emulsions Published In Tribology International
2007	Particle Trajectories in Dilute Phase Pneumatic Conveying Published In Particulate Science and Technology: an international journal

Book

Year	Title
2017	Pemrograman Metode Elemen Hingga Berbasis Matlab + cd Publisher Edisi⁄Cetakan
2012	Teori dan Aplikasi Metode Elemen Hingga
2007	Teori dan Aplikasi Komputasi Numerik

Conference Paper

Year	Title
2019	Near-Roof Air Temperatures: Modelling the Implications for HVAC Performance and Cool Roofs Published In 16th IBPSA International Conference and Exhibition
2014	A tool to estimate the wheel/rail contact and temperature rising under dry, wet and oily conditions Published In COMPRAIL 14th Conference on Railway Engineering Design and Optimization
2013	An application of nonlinear feature extraction – a case study for low speed slewing bearing condition monitoring and prognosis Published In 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM)
2013	Condition monitoring of slow speed slewing bearing based on largest lyapunov exponent algorithm and circular-domain feature extractions Published In 26th International Condition Monitoring and Diagnostic Engineering Management Congress (COMADEM)
2013	Friction and wear studies of Si and Ti surfaces lubricated by aqueous copolymer Published In 5th World Tribology Congress, WTC 2013
2013	Rolling contact stress states of two contact points on curved track Published In 10th World Congress on Railway Research
2012	Experimental study of the performance of bare and nozzle-diffuser shrouded micro wind turbine under axial and non-axial inflow condition Published In 18th Australasian Fluid Mechanics Conference
2011	Modelling net zero energy options for a sustainable buildings research centre Published In 12th Conference of International Building Performance Simulation Association, Building Simulation 2011 Conference
2010	Effect of bulk temperature on the tribological performance of aqueous symmetric tri-block copolymers (PPO-PEO-PPO and PEO-PPO-PEO) based lubricant Published In International Tribology Congress ASIATRIB 2010
2009	CFD analysis of air turbines as power take-off systems in oscillating water column wave energy conversion plant Published In European Wave and Tidal Energy Conference, Uppsala, Sweden
2008	CFD Analysis of Blade Cascades for OWC Turbines Published In 2nd International Conference on Ocean Energy (ICOE 2008)
2008	CFD Analysis of the Performance of Blade Cascades for Air Turbines in Oscillating Water Column Wave Energy Conversion Systems Published In Proc. 3rd International Solar Energy Society Conference Asia Pacific Region (ISES-AP-08)
2008	Fabrication and characterization of MR elastomers with high MR effects Published In 15th International Congress on Sound and Vibration, 6-10 July 2008, Daejeon, Korea
2007	Development of a 2-DOF MR joysticks for virtual reality applications Published In International Conference on Electrorheological Fluids and Magnetorheological Suspensions
2007	MATLAB simulation of semi-active skyhook control of a quarter car incorporating an MR damper and a fuzzy logic controller Published In International Conference on Nonlinear Science and Complexity
2007	Performance testing and hysteresis modeling of a position-feedback MR actuator Published In International Conference on Electrorheological Fluids and Magnetorheological Suspensions 2006

Other Publications

Year	Title
2018	Driving Increased Utilisation of Cool Roofs on Large-Footprint Buildings - Final Report

Investigator On

Year	Title
2020	ARC Research Hub for Australian Steel Innovation Awarded by: Australian Research Council (ARC) Funding Scheme: Industrial Transformation Research Hubs
2011	Lubrication mechanism in hot strip rolling Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects
2007	Tribological contact of work roll in hot rolling Awarded by: Australian Research Council (ARC) Funding Scheme: Discovery Projects

Impact Story

3D printed fins for surfboards: finding the right flow
Summary
Engagement with media and working with industry

Detail View

Detail View Summary View
Detail of Impact
Our work on 3D printed resulted in a lot of media exposure for research at the University of Wollongong
Field of Research
Countries / Regions
Beneficiaries

Beneficiary Quantification Description
External Partners
Evidence of Impact

Evidence Description
UOW Centres / Programs
UOW Researchers / Collaborators

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	Development of a Sustainable Supply Chain Framework for Commercial Aviation - Does SCOR Stand the test of time?
Doctor of Philosophy	Unsteady Impingement Pressure of Planar Thin Coating Wiping Jets: Governing Role of Jet Flow Field Perturbations and Jet Vortex Dynamics	Phan, Le Quang
Doctor of Philosophy (Integrated)	Computational and Experimental Study of Shrouded River Current Turbine in finite size channel	Rachman, Aditya
Doctor of Philosophy	Dispersion stability and lubricity of environmentally friendly TiO2/SiO2 nanoparticle-functionalised oil droplets of soybean vegetable oil-in-water emulsions	Taheri, Reza
Doctor of Philosophy	Dynamics Flow in the meniscus Region of Liquid drag-out	Ahmed, Rubel
Master of Research - EIS	Design of specialised torsional springs for assistive robotics with gravity compensation	Napawan, Yotsathorn

Awards And Honors

Outstanding Contribution to Teaching and Learning Award, 2013

Teaching Overview

2016 - : Associate Professor, The school of Mechanical, Materials & Mechatronic Engineering, University of Wollongong.

2010 - 2015 : Senior Lecturer, The school of Mechanical, Materials & Mechatronic Engineering, University of Wollongong.

2006 to 2009: Lecturer, The school of Mechanical, Materials & Mechatronic Engineering, University of Wollongong.

2000 to 2005: Research Associate, The school of Mechanical, Materials & Mechatronic Engineering, University of Wollongong.

Located In Facility

Building 8, Room 107

Orcid Id

http://orcid.org/0000-0003-3346-9342 (confirmed)

Scopus Id

6602907219

Overview

Overview

Top Publications

Research Areas

Research Overview

Available as Research Supervisor

Affiliation

Available for Collaborative Projects

Head Of

Publications

Selected Publications

Journal Article

Book

Conference Paper

Other Publications

Funding

Investigator On

Impact

Impact Story

3D printed fins for surfboards: finding the right flow

Supervision

Available as Research Supervisor

Advisees

Graduate Advising Relationship

Background

Awards And Honors

Teaching Overview

Contact

Located In Facility

Identity

Orcid Id

Scopus Id

Overview

Top Publications

Research Areas

Research Overview

Affiliation

Head Of

Publications

Selected Publications

Journal Article

Book

Conference Paper

Other Publications

Funding

Investigator On

Impact

Impact Story

3D printed fins for surfboards: finding the right flow

Supervision

Advisees

Graduate Advising Relationship

Background

Awards And Honors

Teaching Overview

Contact

Located In Facility

Identity

Orcid Id

Scopus Id

Visualisations

Research Areas