Godbole, Ajit R.

Top Publications

Year	Title
2007	Computational fluid dynamics analysis of on-torch welding fume extraction Published in Australasian Welding Journal - Welding Research Supplement

Selected Publications

Journal Article

Year	Title
2020	An improved dynamic stall model and its effect on wind turbine fatigue load prediction Published In Renewable Energy
2020	CFD simulations of DPM flow patterns generated by vehicles in underground mines for different air flow and exhaust pipe directions Published In International Journal of Mining and Mineral Engineering
2020	Investigation of DPM dispersion in unventilated dead-ends using transient flow modelling Published In International Journal of Mining and Mineral Engineering
2019	Consequence modelling of CO2 pipeline failure Published In Energy Procedia
2019	DPM flow pattern of LHD in underground mines with different ventilation conditions Published In Journal of Mining and Environment
2019	Decompression of hydrogen—natural gas mixtures in high-pressure pipelines: CFD modelling using different equations of state Published In International Journal of Hydrogen Energy
2019	Effect of ventilation air velocities on diesel particulate matter dispersion in underground coal mines Published In International Journal of mining and geo-engineering
2019	High thermal stability and excellent mechanical properties of ultrafine-grained high-purity copper sheets subjected to asymmetric cryorolling Published In Materials Characterization
2019	Improved dynamic stall prediction of wind turbine airfoils Published In Energy Procedia
2019	Investigation of the consequence of high-pressure CO 2 pipeline failure through experimental and numerical studies Published In Applied Energy
2019	Microstructure and mechanical properties of large-volume gradient-structure aluminium sheets fabricated by cyclic skin-pass rolling Published In Philosophical Magazine
2018	A CFD decompression model for CO2 mixture and the influence of non-equilibrium phase transition Published In Applied Energy
2018	Fundamental understanding of diesel-operated man riding vehicle DPM dispersion - A case study Published In Journal of Sustainable Mining
2018	Improvement in Strength and Ductility of Asymmetric-Cryorolled Copper Sheets Under Low-Temperature Annealing Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018	Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling Published In Philosophical Magazine
2017	Decompression Modelling of Pipelines Carrying CO2-N2 Mixture and the Influence of Non-equilibrium Phase Transition Published In Energy Procedia
2017	Effects of aerodynamic damping on the tower load of offshore horizontal axis wind turbines Published In Applied Energy
2017	Enhanced materials performance of Al/Ti/Al laminate sheets subjected to cryogenic roll bonding Published In Journal of Materials Research
2017	Investigation of terrain effects on the consequence distance of CO2released from high-pressure pipelines Published In International Journal of Greenhouse Gas Control
2017	Multi-phase decompression modeling of CO2 pipelines Published In Greenhouse Gases: science and technology
2017	Tower Load Analysis of Offshore Wind Turbines and the Effects of Aerodynamic Damping Published In Energy Procedia
2017	Vibration-induced aerodynamic loads on large horizontal axis wind turbine blades Published In Applied Energy
2016	Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Computational fluid dynamics simulation of carbon dioxide dispersion in a complex environment Published In Journal of Loss Prevention in the Process Industries
2016	Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Microstructure evolution of accumulative roll bonding processed pure aluminum during cryorolling Published In Journal of Materials Research
2016	Simultaneous grain growth and grain refinement in bulk ultrafine-grained copper under tensile deformation at room temperature Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: a review Published In Advanced Engineering Materials
2016	Superstrength of nanograined steel with nanoscale intermetallic precipitates transformed from shock-compressed martensitic steel Published In Scientific Reports
2015	A new insight into ductile fracture of ultrafine-grained Al-Mg alloys Published In Scientific Reports
2015	Decompression wave speed in CO2 mixtures: CFD modelling with the GERG-2008 equation of state Published In Applied Energy
2015	High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2015	Influence of the vibration of large-scale wind turbine blade on the aerodynamic load Published In Energy Procedia
2015	Optimisation of dispersion parameters of Gaussian plume model for CO2 dispersion Published In Environmental Science and Pollution Research
2015	Optimization of process parameters in twin-roll strip casting of an AZ61 alloy by experiments and simulations Published In International Journal of Advanced Manufacturing Technology
2015	Study of the consequences of CO2 released from high-pressure pipelines Published In Atmospheric Environment
2014	A deformation mechanism of hard metal surrounded by soft metal during roll forming Published In Scientific Reports
2014	An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Crack healing in a low-carbon steel under hot plastic deformation Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Investigation of closure of internal cracks during rolling by FE model considering crack surface roughness Published In International Journal of Advanced Manufacturing Technology
2014	Source strength and dispersion of CO2 releases from high-pressure pipelines: CFD model using real gas equation of state Published In Applied Energy
2014	Tensile fracture of ultrafine grained aluminum 6061 sheets by asymmetric cryorolling for microforming Published In International Journal of Damage Mechanics
2013	Fabrication of ultra-thin nanostructured bimetallic foils by Accumulative Roll Bonding and Asymmetric Rolling Published In Scientific Reports
2013	Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2010	Design and optimization of a novel on-torch fume extraction device using CFD and fluid simulation Published In Welding in the World
2007	Computational fluid dynamics analysis of on-torch welding fume extraction Published In Australasian Welding Journal - Welding Research Supplement
2007	Modelling and Simulation of Gas Flows in Arc Welding - Implications for Shielding Efficiency and Fume Extraction Published In Revista Soldagem and Inspecao
2007	Particle Trajectories in Dilute Phase Pneumatic Conveying Published In Particulate Science and Technology: an international journal

Conference Paper

Year	Title
2019	Diesel-operated man-riding vehicle and load haul dumper DPM dispersion Published In National Conference on "Recent Advances in Mining Technology"- (RAMT-2019)
2018	CO2Safe-Arrest: A full-scale burst test research program for carbon dioxide pipelines - Part 3: Dispersion modelling Published In 2018 12th International Pipeline Conference: IPC2018: Volume 2: Pipeline Safety Management Systems; Project Management, Design, Construction, and Environmental Issues; Strain Based Design; Risk and Reliability; Northern Offshore and Production Pipelines
2014	Re-examination of battelle two curve method Published In 2014 10th International Pipeline Conference: Volume 3: Materials and Joining; Risk and Reliability
2014	Venting of a 32 km NG pipeline - Field measurements and CFD simulations Published In 2014 10th International Pipeline Conference: Volume 1: Design and Construction; Environment; Pipeline Automation and Measurement
2013	Recent developments in flat rolling technologies Published In PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing
2013	Transition of ductile and brittle fracture during DWTT by FEM Published In 13th International Conference on Fracture (ICF)
2013	Two-dimensional CFD modelling of gas-decompression behaviour Published In The 6th International Pipeline Technology Conference
2012	Investigation of the effects of pipe wall roughness and pipe diameter on the decompression wave speed in natural gas pipelines Published In 9th International Pipeline Conference, Volume 3: Materials and Joining
2012	The 'Eckert number phenomenon' in pipeline decompression Published In Proceedings of the Biennial International Pipeline Conference, IPC
2008	Design and optimisation of a novel on-torch fume extraction device using CFD and fluid simulation Published In International Conference of the International Institute of Welding

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	Acoustic Propagation Variation with Temperature Profile in Water Filled Steel Pipes at Pressure	Hough, John
Doctor of Philosophy	Investigation of Diesel particulate matter distribution and control strategies in airflow restricted zones of underground coal mines using computational fluid dynamics	Morla, Ramakrishna

Top Publications

Year	Title
2007	Computational fluid dynamics analysis of on-torch welding fume extraction Published in Australasian Welding Journal - Welding Research Supplement

Selected Publications

Journal Article

Year	Title
2020	An improved dynamic stall model and its effect on wind turbine fatigue load prediction Published In Renewable Energy
2020	CFD simulations of DPM flow patterns generated by vehicles in underground mines for different air flow and exhaust pipe directions Published In International Journal of Mining and Mineral Engineering
2020	Investigation of DPM dispersion in unventilated dead-ends using transient flow modelling Published In International Journal of Mining and Mineral Engineering
2019	Consequence modelling of CO2 pipeline failure Published In Energy Procedia
2019	DPM flow pattern of LHD in underground mines with different ventilation conditions Published In Journal of Mining and Environment
2019	Decompression of hydrogen—natural gas mixtures in high-pressure pipelines: CFD modelling using different equations of state Published In International Journal of Hydrogen Energy
2019	Effect of ventilation air velocities on diesel particulate matter dispersion in underground coal mines Published In International Journal of mining and geo-engineering
2019	High thermal stability and excellent mechanical properties of ultrafine-grained high-purity copper sheets subjected to asymmetric cryorolling Published In Materials Characterization
2019	Improved dynamic stall prediction of wind turbine airfoils Published In Energy Procedia
2019	Investigation of the consequence of high-pressure CO 2 pipeline failure through experimental and numerical studies Published In Applied Energy
2019	Microstructure and mechanical properties of large-volume gradient-structure aluminium sheets fabricated by cyclic skin-pass rolling Published In Philosophical Magazine
2018	A CFD decompression model for CO2 mixture and the influence of non-equilibrium phase transition Published In Applied Energy
2018	Fundamental understanding of diesel-operated man riding vehicle DPM dispersion - A case study Published In Journal of Sustainable Mining
2018	Improvement in Strength and Ductility of Asymmetric-Cryorolled Copper Sheets Under Low-Temperature Annealing Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2018	Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2018	Nanoporous Al sandwich foils using size effect of Al layer thickness during Cu/Al/Cu laminate rolling Published In Philosophical Magazine
2017	Decompression Modelling of Pipelines Carrying CO2-N2 Mixture and the Influence of Non-equilibrium Phase Transition Published In Energy Procedia
2017	Effects of aerodynamic damping on the tower load of offshore horizontal axis wind turbines Published In Applied Energy
2017	Enhanced materials performance of Al/Ti/Al laminate sheets subjected to cryogenic roll bonding Published In Journal of Materials Research
2017	Investigation of terrain effects on the consequence distance of CO2released from high-pressure pipelines Published In International Journal of Greenhouse Gas Control
2017	Multi-phase decompression modeling of CO2 pipelines Published In Greenhouse Gases: science and technology
2017	Tower Load Analysis of Offshore Wind Turbines and the Effects of Aerodynamic Damping Published In Energy Procedia
2017	Vibration-induced aerodynamic loads on large horizontal axis wind turbine blades Published In Applied Energy
2016	Annealing effect on microstructure and mechanical properties of Al/Ti/Al laminate sheets Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Computational fluid dynamics simulation of carbon dioxide dispersion in a complex environment Published In Journal of Loss Prevention in the Process Industries
2016	Enhanced mechanical properties of ARB-processed aluminum alloy 6061 sheets by subsequent asymmetric cryorolling and ageing Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2016	Microstructure evolution of accumulative roll bonding processed pure aluminum during cryorolling Published In Journal of Materials Research
2016	Simultaneous grain growth and grain refinement in bulk ultrafine-grained copper under tensile deformation at room temperature Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2016	Special rolling techniques for improvement of mechanical properties of ultrafine-grained metal sheets: a review Published In Advanced Engineering Materials
2016	Superstrength of nanograined steel with nanoscale intermetallic precipitates transformed from shock-compressed martensitic steel Published In Scientific Reports
2015	A new insight into ductile fracture of ultrafine-grained Al-Mg alloys Published In Scientific Reports
2015	Decompression wave speed in CO2 mixtures: CFD modelling with the GERG-2008 equation of state Published In Applied Energy
2015	High strength and ductility of ultrathin laminate foils using accumulative roll bonding and asymmetric rolling Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2015	Influence of the vibration of large-scale wind turbine blade on the aerodynamic load Published In Energy Procedia
2015	Optimisation of dispersion parameters of Gaussian plume model for CO2 dispersion Published In Environmental Science and Pollution Research
2015	Optimization of process parameters in twin-roll strip casting of an AZ61 alloy by experiments and simulations Published In International Journal of Advanced Manufacturing Technology
2015	Study of the consequences of CO2 released from high-pressure pipelines Published In Atmospheric Environment
2014	A deformation mechanism of hard metal surrounded by soft metal during roll forming Published In Scientific Reports
2014	An investigation of interface bonding of bimetallic foils by combined accumulative roll bonding and asymmetric rolling techniques Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Crack healing in a low-carbon steel under hot plastic deformation Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
2014	Investigation of closure of internal cracks during rolling by FE model considering crack surface roughness Published In International Journal of Advanced Manufacturing Technology
2014	Source strength and dispersion of CO2 releases from high-pressure pipelines: CFD model using real gas equation of state Published In Applied Energy
2014	Tensile fracture of ultrafine grained aluminum 6061 sheets by asymmetric cryorolling for microforming Published In International Journal of Damage Mechanics
2013	Fabrication of ultra-thin nanostructured bimetallic foils by Accumulative Roll Bonding and Asymmetric Rolling Published In Scientific Reports
2013	Mechanical properties of Al-Mg-Si alloy sheets produced using asymmetric cryorolling and ageing treatment Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
2010	Design and optimization of a novel on-torch fume extraction device using CFD and fluid simulation Published In Welding in the World
2007	Computational fluid dynamics analysis of on-torch welding fume extraction Published In Australasian Welding Journal - Welding Research Supplement
2007	Modelling and Simulation of Gas Flows in Arc Welding - Implications for Shielding Efficiency and Fume Extraction Published In Revista Soldagem and Inspecao
2007	Particle Trajectories in Dilute Phase Pneumatic Conveying Published In Particulate Science and Technology: an international journal

Conference Paper

Year	Title
2019	Diesel-operated man-riding vehicle and load haul dumper DPM dispersion Published In National Conference on "Recent Advances in Mining Technology"- (RAMT-2019)
2018	CO2Safe-Arrest: A full-scale burst test research program for carbon dioxide pipelines - Part 3: Dispersion modelling Published In 2018 12th International Pipeline Conference: IPC2018: Volume 2: Pipeline Safety Management Systems; Project Management, Design, Construction, and Environmental Issues; Strain Based Design; Risk and Reliability; Northern Offshore and Production Pipelines
2014	Re-examination of battelle two curve method Published In 2014 10th International Pipeline Conference: Volume 3: Materials and Joining; Risk and Reliability
2014	Venting of a 32 km NG pipeline - Field measurements and CFD simulations Published In 2014 10th International Pipeline Conference: Volume 1: Design and Construction; Environment; Pipeline Automation and Measurement
2013	Recent developments in flat rolling technologies Published In PRICM: 8 Pacific Rim International Congress on Advanced Materials and Processing
2013	Transition of ductile and brittle fracture during DWTT by FEM Published In 13th International Conference on Fracture (ICF)
2013	Two-dimensional CFD modelling of gas-decompression behaviour Published In The 6th International Pipeline Technology Conference
2012	Investigation of the effects of pipe wall roughness and pipe diameter on the decompression wave speed in natural gas pipelines Published In 9th International Pipeline Conference, Volume 3: Materials and Joining
2012	The 'Eckert number phenomenon' in pipeline decompression Published In Proceedings of the Biennial International Pipeline Conference, IPC
2008	Design and optimisation of a novel on-torch fume extraction device using CFD and fluid simulation Published In International Conference of the International Institute of Welding

Advisees

Graduate Advising Relationship

Degree	Research Title	Advisee
Doctor of Philosophy	Acoustic Propagation Variation with Temperature Profile in Water Filled Steel Pipes at Pressure	Hough, John
Doctor of Philosophy	Investigation of Diesel particulate matter distribution and control strategies in airflow restricted zones of underground coal mines using computational fluid dynamics	Morla, Ramakrishna

Located In Facility

Building 8, Room G17

Orcid Id

http://orcid.org/0000-0002-6403-1952 (pending confirmation)

Scopus Id

7004221365

Godbole, Ajit R. Dr

Senior Research Fellow

Overview

Top Publications

Publications

Selected Publications

Journal Article

Conference Paper

Supervision

Advisees

Graduate Advising Relationship

Contact

Located In Facility

Identity

Orcid Id

Scopus Id

Overview

Top Publications

Publications

Selected Publications

Journal Article

Conference Paper

Supervision

Advisees

Graduate Advising Relationship

Contact

Located In Facility

Identity

Orcid Id

Scopus Id

Visualisations