Saleh, Ahmed Dr

Selected Publications

• Journal Article

  Year	Title
  2021	An in-situ electron backscattering diffraction and viscoplastic self-consistent study of OFHC copper subjected to uniaxial tension Published In Materials Science and Engineering A
  2021	An in-situ neutron diffraction investigation of martensitic transformation in a metastable ß Ti-10V-2Fe-3Al alloy during uniaxial tension Published In Journal of Alloys and Compounds
  2020	An in situ synchrotron study of the localized B2¿B19' phase transformation in an Ni-Ti alloy subjected to uniaxial cyclic loading-unloading with incremental strains Published In Journal of Applied Crystallography
  2020	Predicting the available work from deformation-induced ¿¿¿ martensite formation in metastable ß Ti alloys Published In Journal of Applied Crystallography
  2019	A comparative study of a NiTi alloy subjected to uniaxial monotonic and cyclic loading-unloading in tension using digital image correlation: The grain size effect Published In Journal of Alloys and Compounds
  2019	An in-situ synchrotron study of the B2→B19′ phase transformation in a Ni-Ti alloy subjected to uniaxial monotonic tension Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2019	Evolution of Microstructure During the In Situ Heating of 42 Pct Cold-Rolled High Mn Steel Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
  2019	Experimental and Self-Consistent Modeling Study of De-twinning in a Twinning-Induced Plasticity Steel Published In Journal of Metals
  2019	Phase-specific properties in a low-alloyed TRIP steel investigated using correlative nanoindentation measurements and electron microscopy Published In Journal of Materials Science
  2019	The effect of β-phase condition on the tensile behaviour in a near-β Ti alloy produced by blended elemental powder metallurgy Published In Journal of Materials Science and Engineering A
  2018	A digital image correlation study of a NiTi alloy subjected to monotonic uniaxial and cyclic loading-unloading in tension Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2018	Effect of Uniaxial Tension on the Microstructure and Texture of High Mn Steel Published In Advanced Engineering Materials
  2018	Effect of isochronal annealing on the microstructure, texture and mechanical properties of a cold-rolled high manganese steel Published In Materials Characterization
  2018	Nucleation, coarsening and deformation accommodation mechanisms of ε-martensite in a high manganese steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2018	On the evolution and modelling of Cube texture during dynamic recrystallisation of Ni–30Fe–Nb–C model alloy Published In Journal of Alloys and Compounds
  2018	On the first direct observation of de-twinning in a twinning-induced plasticity steel Published In Acta Materialia
  2018	Tetragonality of bcc Phases in a Transformation-Induced Plasticity Steel Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
  2017	Evidencing extrinsic stacking faults in twinning-induced plasticity steel Published In Materials Characterization
  2017	Evolution of microstructure, temperature and stress in a high speed steel work roll during hot rolling: Experiment and modelling Published In Journal of Materials Processing Technology
  2017	Observation of deformation twinning and martensitic transformation during nanoindentation of a transformation-induced plasticity steel Published In Scientific Reports
  2017	Particle stimulated nucleation during dynamic and metadynamic recrystallisation of Ni-30%Fe-Nb-C alloy Published In Materials Characterization
  2017	Site-specific atomic-scale characterisation of retained austenite in a strip cast TRIP steel Published In Acta Materialia
  2017	Strain-induced ferrite formation and its effect on mechanical properties of a dual phase steel produced using laboratory simulated strip casting Published In Journal of Alloys and Compounds
  2017	Stress-Induced Twinning and Phase Transformations during the Compression of a Ti-10V-3Fe-3Al Alloy Published In Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
  2017	Transmission Kikuchi diffraction versus electron back-scattering diffraction: A case study on an electron transparent cross-section of TWIP steel Published In Micron
  2016	A re-evaluation of "The micromechanics of twinning in a TWIP steel" Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2016	A transmission Kikuchi diffraction study of cementite in a quenched and tempered steel Published In Materials Characterization
  2016	Correcting intensity loss errors in the absence of texture-free reference samples during pole figure measurement Published In Materials Characterization
  2016	Investigation of the effect of electrolytic hydrogen charging of X70 steel: I. The effect of microstructure on hydrogen-induced cold cracking and blistering Published In International Journal of Hydrogen Energy
  2016	Investigation of the effect of electrolytic hydrogen charging of X70 steel: II. Microstructural and crystallographic analyses of the formation of hydrogen induced cracks and blisters Published In International Journal of Hydrogen Energy
  2016	Microstructure and micro-texture evolution during the dynamic recrystallisation of a Ni-30Fe-Nb-C model alloy Published In Journal of Alloys and Compounds
  2016	Microstructures and mechanical properties of TRIP steel produced by strip casting simulated in the laboratory Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2016	On the feasibility of partial slip reversal and de-twinning during the cyclic loading of TWIP steel Published In Materials Letters
  2015	A transmission kikuchi diffraction study of a cold-rolled and annealed Fe-17Mn-2Si-3Al-1Ni-0.06C wt% Steel Published In Steel Research International
  2015	An in-situ neutron diffraction study of a multi-phase transformation and twinning-induced plasticity steel during cyclic loading Published In Applied Physics Letters
  2015	Application of transmission Kikuchi diffraction to a multi-phase TRIP-TWIP steel Published In Materials Today : proceedings
  2015	Microstructure evolution during isochronal annealing of a 42% cold rolled TRIP-TWIP steel Published In IOP Conference Series: Materials Science and Engineering
  2014	On the evolution and modelling of brass-type texture in cold-rolled twinning-induced plasticity steel Published In Acta Materialia
  2014	Recrystallisation in a cold drawn low cost beta titanium alloy during rapid resistance heating Published In Journal of Alloys and Compounds
  2014	Role of microstructure in susceptibility to hydrogen embrittlement of X70 microalloyed steel Published In Materials Science Forum
  2014	Self-consistent modeling of texture evolution in TWIP steel during uniaxial tension Published In Steel Research International
  2014	Self-consistent modelling of TWIP steel during uniaxial tensile loading Published In Materials Science Forum
  2014	Self-consistent modelling of lattice strains during the in-situ tensile loading of twinning induced plasticity steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2014	Shear texture gradient in AA6061 aluminum alloy processed by accumulative roll bonding with high roll roughness Published In Journal of Alloys and Compounds
  2013	EBSD observations of recrystallisation and tensile deformation in twinning induced plasticity steel Published In Transactions of the Indian Institute of Metals
  2013	Microstructure and texture evolution in a twinning-induced-plasticity steel during uniaxial tension Published In Acta Materialia
  2013	On the evolution and modelling of lattice strains during the cyclic loading of TWIP steel Published In Acta Materialia
  2013	On the feasibility of twinning nucleation via extrinsic faulting in twinning-induced plasticity steel Published In Scripta Materialia
  2012	Evolution of microstructure and mechanical properties during annealing of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel Published In Advanced Materials Research
  2012	Texture evolution during recrystallisation of cold rolled TWIP steel Published In Materials Science Forum
  2011	Effect of annealing on the microstructure and mechanical properties of cold rolled Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing
  2011	Microtexture analysis of cold-rolled and annealed twinning-induced plasticity steel Published In Scripta Materialia
  2011	Power line enhancement for data monitoring of neural electrical activity in the human body Published In Scientific Research and Essays
  2011	Texture evolution of cold rolled and annealed Fe-24Mn-3Al-2Si-1Ni-0.06C TWIP steel Published In Materials Science and Engineering A: Structural Materials: Properties, Microstructure and Processing

• Conference Paper

  Year	Title
  2015	Stress-induced transformations during the compression of a Ti-1033 alloy Published In Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials: PTM 2015
  2015	Understanding phase transformations in steels using modern electron microscopy techniques Published In Asia Steel International Conference (Asia Steel 2015): proceedings